Installing a Kitchen in my Alu-Cab Canopy Camper 

Hi Kirk, thanks for the comment. If you pause the video during the final 10 seconds, you'll see most of the parts I used listed. The only things I didn't list are the L brackets and bolts because I wouldn't necessarily recommend using the exact ones I used. I used some 10 Series corner brackets from tnutz.com that I had for another project, but they were a little tight for this application. The best bracket is probably just drilling your own aluminum angle and using the 1/4" head bolts that are used in the campers channels from the factory.

With the hardware I used there wasn’t enough room to tighten the bolt side from the bottom but just enough room to hold from the bottom while tightening from the top. If you do something similar I think you could have a cleaner install with smaller diameter bolts and doing exactly what you said. The 80/20 right angle brackets I used have really tight working room. Good luck with your customizations. It’s fun stuff!

The sink is available on the Monarch Abode website and amazon: www.monarchabode.com/collections/bar-and-kitchen-sinks/products/monarch-abode-pure-copper-hand-hammered-glasgow-dual-mount-bar-prep-sink-12-inches