Installing Bar End Mirrors On The Segway Ninebot GT1 

Thank you for the positive feedback. 😁🙏

Right on! 😎👊

You are very welcomed. 😎👊

I definitely will. Im working on a range test video in Eco mode for the whole test, but im trying to get this Insta360 Ace Pro camera to not look washed out from the image and also not flicker the Speedometer of the GT1. 😅 Action Cam Issues.....

Thank you, yeah i recorded this yesterday and uploaded as soon as i was di e editing the video. 😁🙏

Thank you so much. I have a link in the description for everything i have installed on my GT1 so far. I too have been having a hard time trying to find a rack for it so i just bought a zipper pouch so i can at least put the Allen keys in it to adjust the mirrors if needed. With a little slim master lock since the zipper holes are on the small side.

​@@THEAVERAGEGUY1983 thanks. How often do you have to adjust those mirrors? It would be tiresome to have to adjust them every hour or 10minutes with the Allen's.

@likewater1429 oh i only adjusted them once. They have been very good at not moving even though ive gone through very poor roads where everything is bumpy. Im surprised my aelf at how well they stay put.

Yep. It is in the description area direct link to Amazon to the exact one i got.

SOWUNO 126Db Bicycle Electric Horn Rechargeable Bike Alarm Bells Loud Bike Horns for Adults Waterproof Motorcycle Horn Anti-Theft Vibration Alarm for Road Mountain Bike|Motorcycle|Scooters etc a.co/d/hUSqmjF

Hi Stephen, i like it a lot. Its very stable and the brakes are Excellent. However i do recommend two chargers. At first i though 1 charger was fine but then i seen that if the battery was at 10% charging to 100% it would take 10 hours to charge. With a second charger which i had to purchase separately, it now chargers at about 5 hours or less which is way more reasonable if i use it daily.

@walterhernandez1563 hi, yes it will all you have to do is follow the same process. The left side will use the included hardware and the right side where the throttle is will be using an M5 screws which will replace the stock screw and rubber grommet that comes with the GT series of scooters. 😎👍

@@THEAVERAGEGUY1983 thank you so much!

@erenyedikardes3435 hi, i used this large mount from Ram Mounts without the insert and longer screws and then tightened it as tight as possible. RAM MOUNTS Torque Large Rail Base... www.amazon.com/dp/B01GQCMK8K?ref=ppx_pop_mob_ap_share I then went with Quadlock for my mount as the cellphone holder i previously had which is in this video broke on me using a samsung Galaxy note 20 Ultra. Quad Lock 1" Ball Adaptor Mount... www.amazon.com/dp/B093QZR6M8?ref=ppx_pop_mob_ap_share I then used this 1 inch ball mount clamp to put both parts together on the handlebar for mounting the Quadlock. BRCOVAN Aluminum Alloy Anti-Theft... www.amazon.com/dp/B0BBMJ3XR3?ref=ppx_pop_mob_ap_share The original phone mount i had on does have its own 1 inch ball mount clamp which is also theft proof. Kewig Motorcycle Phone Mount with... www.amazon.com/dp/B0C144W14R?ref=ppx_pop_mob_ap_share Hope this helps. 😁🙏

@Jakepp235 hi and welcome, i have only had 1 problem with the GT1 at 50 miles on the Odometer and that was a tire valve stem randomly popping out of place from the rubber stem that brass metal part that gets the air in got unglued and i had to replace it but other then that zero issues with the GT1. Its a great scooter 😎👍

@@THEAVERAGEGUY1983thanks, how did you replace it? Where did you order it the stem

@Jakepp235 i ordered it from segway directly and apparently one of the reasons i had such a hard time finding it was because they call it (Air Nuzzle) and not (Tire Valve Stem) 😅 so it turns out the valve stem for the P65 and P100S fits the GT1 and GT2 100% the Max G2 valve stem i had originally installed was way too short and i had a hard time putting air in the tire. Its in stock right now so i would take advantage of it and order 2 and keep them as a spare should you need it. I couldn't use my GT1 for 2 weeks because i couldn't find the proper size valve stem. 😅 store.segway.com/air-nozzle-p65-p100s

@Jakepp235 as for replacing it, i used two dewalt branded C clamps to put pressure on one side of the tire wall and the opposite side of the C clamp being against the rim of the scooter to help one side of the tire off the bead. I them pressed it out with my thumb and installed the new one and then used an air compressor i have to re inflate the tire and get it to pop back into the bead of the rim and it worked. 😁👍

Absolutely! 😁👍

At the moment no because the handlebar and kickstand are broken so i have to wait for segway to eventually have parts so i can fix it but it does run 100% 😎👍

@@lunapianomovers8956 it had a bracket that was easy to install with 2 screws and then i just ran the wire that has the horn button to the handlebar grib area and strapped it on and finally, zip tied that wire to the brake line cable to make it look as clean as possible. SOWUNO 126Db Bicycle Electric Horn Rechargeable Bike Alarm Bells Loud Bike Horns for Adults Waterproof Motorcycle Horn Anti-Theft Vibration Alarm for Road Mountain Bike|Motorcycle|Scooters etc a.co/d/9ZKS3er

@@THEAVERAGEGUY1983 I have the same model. Tried doing it through the turn signal hole but not wide enough.

@lunapianomovers8956 interesting. Ill have to make a quick video of it for you.

Not at all. It was a simple bolt on. I just had to use the orage color rubber strap that is included in the thumb throttle kit to be able to install it without it being too tight so the twist throttle can still move freely. I do, however, recommend that you disable the motor when the brakes are pressed down. I had a small little incident where i got my glove stuck on the twist throttle while holding on to the brake, and the scooter tried taking off on me. I did drop it on the curb and damaged my kickstand. Thankfully, i was able to replace the kickstand, but that was close. 😅

@@THEAVERAGEGUY1983 thanks for responding. It seems like you are saying though that I need a piece from the thumb throttle (orange rubber strap) to successfully install the phone mount. Is that so? I do not want the thumb throttle kit. Just the phone mount.

@likewater1429 oh........ i thought you wanted the thumb throttle lol. I apologize yeah for the phone mount i would recommend this RAM mount bracket with longer screws, you can use the same locking nuts that are included in the kit. However i did upgrade to A Quadlock mount that i simply attached to the RAM mounts ball joint mount because my phone was too big and broke the phone mount i had on the video. RAM MOUNTS Torque Large Rail Base RAM-B-408-112-15U with B Size 1" Ball a.co/d/0rlpUPG If you still want the phone case i had on the video here is the link for that one. Kewig Motorcycle Phone Mount with Vibration Dampener & High-Speed Secure Lock, One Hand Operation with Anti-Theft Phone Cradle for Motorcycle Bike ATV/UTV Scooter Handlebar Fit 5.4-7.2" Phone a.co/d/eDjqAWR Here is the Quadlock one i used. I just simply removed the original phone mount i had but left the ball joint bracket from it for the Quadlock mount but upgraded my phone case to the Quadlock case for my NOTE 20 Ultra. Quad Lock 1" Ball Adaptor Mount for iPhone and Samsung Galaxy Phones a.co/d/1zvZxms

​​​​@@THEAVERAGEGUY1983 You're great thanks! I just subscribed. Confusion below. Please help. I'm a little on the spectrum here, Sorry. Let's organize things for I can better understand. FYI I have a Galaxy s23 ultra. Segway GT1. Bullet points or grocery list format works best for me, hahaha. - I'd like your current set up. - I plan on getting the mirrors. - Ram mount bracket - Longer screws for Ram mount bracket - Get 1032 by 3inches screws? Or a 1032 by 2 and a half inches screws? - Get a 1032 washer - Get Quad lock phone mount for my S23 Ultra - do I get the short arm or medium arm socket - does the Allen wrenches needed come included or you had to use the ones you posted a link of - where is this vibration dampener they speak of that is optional. I do not see it.

@likewater1429 not a problem, you are correct, i would use the 2 1/2" 10-32 screws for the Large RAM Mount with the ball joint on it. As for the Quadlock case you can use for your phone, I'll put the link here for you. 1. RAM Mount (Mount For GT1) RAM MOUNTS Torque Large Rail Base... www.amazon.com/dp/B01GQCMK8K?ref=ppx_pop_mob_ap_share 2. Quadlock Case for the S23 Ultra Quad Lock Case for Samsung Galaxy S23 Ultra Black a.co/d/aCpfvYu 3. RAM Mount Socket Arm im using for the Quadlock phone mount RAM Mounts RAP-B-201U-A Composite Double Socket Arm - Short Arm Compatible with B Size 1" Ball Components a.co/d/fuUbca0 4. Quadlock Ball Joint Phone Mount Quad Lock 1" Ball Adaptor Mount... www.amazon.com/dp/B093QZR6M8?ref=ppx_pop_mob_ap_share 5. Vibration damper for the quadlock mount should you want to get one to prevent the phone camera damaging from the phone shacking too much from Vibration while riding. Quad Lock Motorcycle Vibration Dampener for Smartphones a.co/d/dPJViP0 6. The mirrors i highly recommend for the best visibility. FENRIR Motorcycle Bar End Mirrors for Z900RS Z650RS Vulcan S CB300R CB650R CB1000R SV650 XSR700 XSR900 Scout Monster Diavel Scrambler RnineT Street Twin Speed Triple Street Triple Bonneville V7 V9 a.co/d/9HXzFXa