Installing Binding and Purfling on my Handmade Acoustic Guitar

Подписаться 95 тыс.

Просмотров 3,4 тыс.

50% 1

I'm making more progress on the acoustic guitar. I need to trim the top and back plates flush with the sides. Then I'll cut the binding channels and install the maple purfling and homemade Elm Binding. Then there's the sanding.
Check out how I made my binding tower - • Building the Guitar Bi...
Build Your Own Binding Tower with my Drawings - www.homebuiltworkshop.com/pro...
-- Affiliate Links to Products Used --
Titebond Original Glue - amzn.to/45r0QLy
Quick Grip Clamps - amzn.to/44hqCki
Zona Razor Saw - amzn.to/3C1MkOd
Mineral Spirits - amzn.to/46arw3S
-- Visit My Website--
www.homebuiltworkshop.com/
-- Check Out My Handmade Guitars --
www.hayleyguitars.com/
-- Save 10% and get some awesome CA Glue from Starbond --
bit.ly/2WJmxbL
-- Ways To Support HBW --
www.homebuiltworkshop.com/sup...
-- My TeeSpring Store --
teespring.com/stores/home-bui...
-- Check out my Amazon Shop --
www.amazon.com/shop/homebuilt...
-- Join the HBW Built not Bought Facebook Group --
groups/homebuiltworkshop/
-----Connect on Social Media-----
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
----- My Mailing Address -----
Home Built Workshop LLC
P.O. Box 84
Peyton, CO 80831
Please remember when using tools of any type, there is the potential for injury. You are responsible for your own safety. Make sure you know how to use your tools properly, work at your own risk, be safe, wear your safety gear, and most of all, have fun!
#acousticguitar #guitarbuilding #homebuiltworkshop

Хобби

Опубликовано:

10 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 19

@00vTv00 28 дней назад

Thank you,....great video taking us through the whole process, purflings and bindings are so crucial for the over-all perfection of craftsmanship, a rough purfling/binding job will attract negative attention quickly.

@homebuiltshop 19 дней назад

Glad it was helpful!

@RmsPaintStudio Месяц назад

i love this kind of videos where you guys open freely about the errors mistakes and to fix it, really thx for share.

@SkyscraperGuitars 6 месяцев назад

Jeff, the guitar is looking beautiful! I can't wait to get caught up and see it finished.

@homebuiltshop 6 месяцев назад

I can't wait either. I was using my Skyscraper Radius sanding beam today on the fretboard.

@paulwaldrop2262 9 месяцев назад

Looking great Jeff. Thanks so much for making that set into a guitar. It looks great and can't wait to hear it.

@homebuiltshop 9 месяцев назад

Thanks Paul! This body is getting set aside so I can now work on the neck. I cant wait.

@dastardlydave1455 9 месяцев назад

Cool to see this process. Thanks Jeff

@homebuiltshop 9 месяцев назад

Thanks Dave!

@robertr4193 9 месяцев назад

Hope you see this Jeff. I got an email add from Stewmac this morning saying that they have some European Spruce tops and a few other Variety of spruce and some cedar starting at as low as $49.00 for one sized for a small guitar and I think it was $69.00 for a dreadnought size. Hope it helps out if you are interested.

@homebuiltshop 9 месяцев назад

I think I got that same one. I'll check it out. Thanks for letting me know.

@Neptune730 9 месяцев назад

It's lookin' good Jeff.

@homebuiltshop 9 месяцев назад

Thanks man!

@youtubecommentor4480 15 дней назад

Hi Jeff! I must’ve missed something. I watched your other video where built a binding channel cutter jig that included a retractable lift and donut. Why didn’t you use that binding jig to gut the binding channels on the guitar body in this video? Thanks Jeff!

@yunowot 9 месяцев назад

Great and cool at the same time = so interesting. My guess was 5-7 cracks per piece. Ah well, just shows me why I shouldn't be doing this and you most definitely should.

@dalgguitars 9 месяцев назад

I know you built the binding cutter jig. But if you didn't have a YT channel, would you get the Elevated Lutherie binding tool? Even at it's cost? It seems like that's what a lot of professionals are getting now. Toughts?

@homebuiltshop 9 месяцев назад

Thanks! I have never used the Elevate Jig myself but have check out a version of it that a friend of mine made. There's something about that design that seems a bit unstable to me. I'm not a fan of the way you need to balance the instrument on the jig while in use. My friend that tried it has since switched to a design more like I use. I'm not saying the Elevate jig is bad at all, I've seen many builders use it and have great results. Its just not my personal preference and I personally don't think I'd buy it. I hope that helps.

@yunowot 9 месяцев назад

I can't believe you haven't asked for my name and address yet so you know where to send it.