Installing Brocks Performance Cams on a 2022 Suzuki Hayabusa - Dyno Results

Подписаться 214 тыс.

Просмотров 30 тыс.

50% 1

Boooy did Brocks Performance pull a trick out of their hat on this one. This 2022 Hayabusa shows massive gains on the top end after installing a set of aftermarket cams.
See some of the performance products we have at:
brocksperformance.com?aff=3
ENTER DISCOUNT CODE MooreMafia5 for a Special Discount!!!!!
Get your ECU Flashed by me.
Call me at 864-608-0119 or www.mooremafia.com/ecu-flashi...
Moore Mafia Drag Racing School
www.mooremafia.com/dragracing...
Moore Mafia Merch
www.mooremafia.com/shop
Get 5% off on Voo Doo Exhaust Products Use code MooreMafia5 at checkout.
www.voodoomoto.com/
To have us make your bike go fast like ours. Just call me
864-608-0119 Tuesday-Saturday 9am-6pm EST
Click this link to get 10% off your Chin Mount
chinmounts.com/?ref=chrismoor...
Use CODE MOOREMAFIA10 @ checkout
Get a FREE INVISIBLE SELFIE STICK with a Insta360 X3 like I use...
store.insta360.com/product/x3...
Click this link to get 10% off your Dragy
dragymotorsports.com/?rfsn=63...
Use code MOOREMAFIA10 @ checkout
Follow us on Instagram
@chrismooremafia
@bigkountrymooremafia
Tik Tok
@mooremafia

Спорт

Опубликовано:

25 фев 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 115

@TenRing69 5 месяцев назад

I just picked up my 25th Anniversary Busa today. What a joy to ride. Its comfortable & smooth. The quick shifter is 10 times better than my 13 S1000rr was. More nimble than my 08 Busa was too.

@spacecityryder 4 месяца назад

I really like that red/orange color 👍

@googlesucks3163 Месяц назад

The 08 I had felt way more powerful than the gen 3’s. Hell my 06 felt stronger

@tysoncott7402 5 месяцев назад

I’m with this fella, im knocking on 50yrs old, iove the litre bikes but after 35-45min i need a break & my gal pal rides with me most time and modern litre bikes suck for that too, these days i have a 22 ZX-14R, a 23 Hayabusa, and a little CBR650R for easy going cruising

@terryplymouth2528 5 месяцев назад

Thank you so much Chris! I really enjoyed hanging out with you and Kountry, you both were super cool. One thing I didn’t think to tell you is those bikes haven’t been ridden since September and the gas in the tanks is about 5 months old. They may have done a little better with fresh gas. I may want to bring them back to get ceramic transmission bearings installed in both bikes. I think the ceramic transmission bearings would definitely wake the 1000 up.

@rickmills1084 5 месяцев назад

what he said. LOL

@robertcarr1571 5 месяцев назад

😂 Yo Terry don't forget where you come from shw love to the ( 757 )

@terryplymouth2528 5 месяцев назад

Always! Still and always will have love for the 757 even though I now reside in the 804.

@provenpowercycles 5 месяцев назад

Good video ! We have a few wanting to do this setup. Good to see they are pulling up at higher rpms now. That drop in power is brutal on the oem setup. 👍

@knightonwarbeck1969 5 месяцев назад

Chris, I think you need to point out the TORQUE difference over a liter bike. HP is matched around 190 but the Busa has 30% MORE TORQUE- 110 vs 85. Factor in this 30% increase in torque with the 190 HP holding an additional 1500 rpm and this Busa should be an absolute screamer of a rocket. If only we can get video of a roll on race (before and after cams) against a liter bike. Once again, please add in a 30 second clip of the customer reaction, post tune ride. Thanks Chris for the content.

@charlesnorthrup545 5 месяцев назад

For me, it would be the Hayabusa all day every day

@DMONEYlNDUSTRY 5 месяцев назад

*that's a heavy ass bike*

@exoticcreature3059 5 месяцев назад

Normally I would agree were it not for the fact that the Kawasaki Ninja Zx14 has the largest displacement engine on offering of any Supersport bike with an inline 4. Really, if everyone loves and fears liter bikes then how will they react to a 1,441 cc engine in a bike? Conjecture.

@exothermal.sprocket 5 месяцев назад

@@DMONEYlNDUSTRY And makes 25 ft-lb more torque than the superbikes. So who cares.

@GH0STMANE995 4 месяца назад

@@DMONEYlNDUSTRYit’s not that heavy,depends on rider preference it still leans real easy and at any speed ifs stable

@clutchitup8565 Месяц назад

It makes the bike easier to ride and more stable at high speeds @@DMONEYlNDUSTRY

@boogabowchickadee400 5 месяцев назад

i live my passion for bikes with rims racing and ride on the edge 3 video games and with moore mafia's videos ❤

@nathanrookard2977 5 месяцев назад

Busa all the way I’ve got two and a bking and love them even with having two gsxr 750s I still love my busas

@BenjySparky 5 месяцев назад

Moore Mafia, y'all rock! Peace

@javierpicon2412 5 месяцев назад

Mr Cris always the master of the Best

@Konchs1 5 месяцев назад

would be a really good video on how to set up the suspension for those bikes for roll/drag racing but nonetheless another banger from the legend MOOREMAIFA

@TeamMooreMafia 5 месяцев назад

Noted!

@davidgill5336 5 месяцев назад

Busa all the way!!!

@dudebud72 4 месяца назад

I’m buying mine tomorrow. I can’t wait. It will be my 3rd, last being an 08, my first 04.

@googlesucks3163 Месяц назад

I had 06 and 08 before the 3rd gen… 3rd gen feels so weak compared

@bigirb2002 5 месяцев назад

installed mine and got a flash from you. she a monster.

@TeamMooreMafia 5 месяцев назад

Let your friends know about us!!

@TheLoneWolf_andCoyote 5 месяцев назад

I'd like to see that Busa with those cams and a Brett Barber cnc ported cylinder head and throttle bodies. I'm sure that will definitely wake it up.

@David07R1 5 месяцев назад

Keep the videos coming Chris!!! Love that the dyno videos are back!!!!!

@robertcarr1571 5 месяцев назад

Yo Terry dont ever forget where you from the local Boys have always been there for you (757) 💯

@djwilliams9842 5 месяцев назад

Cant go wrong having both of them. I think i have the Gixxer set up for the track, and the busa just to ride around as a show bike. 😎

@Thebusaman 5 месяцев назад

Awesome video!

@TeamMooreMafia 5 месяцев назад

Thanks!

@terryplymouth2528 5 месяцев назад

I had the opportunity to take the bike out yesterday and made about 7 or 8 pulls from around 30 to 170mph. Bike is obviously ramping up to speed a lot faster! The main thing I noticed is I was running past redline into the 11.5 area and not hitting the rev limiter until around 11.7 or 11.8. The cams are definitely well worth the money.

@TeamMooreMafia 5 месяцев назад

💪💪

@r0hx227 5 месяцев назад

Just ordered these cams today need to get reflashed the guy i bought the bike from had a moore mafia tune originally.

@Raylep1 5 месяцев назад

I love that exaust.. I wonder what it sounds like with pops and bangs

@busabros2480 5 месяцев назад

said no one ever

@tbrowning9643 5 месяцев назад

Another great video, those cams definitely wake up the busa. Putting up ZX14 numbers now.

@turboboy0 5 месяцев назад

not really. he has a video of a zx14 with filter and exhaust and his tune doing 200hp on pump gas and then 207hp with race gas.

@tbrowning9643 5 месяцев назад

@@turboboy0 I meant a stock one, I know they make 200 with simple bolt ones and tune. I own one 👍🏻

@jockojockoson9995 5 месяцев назад

Nowhere near😊

@user-nn2ev5zh9b 5 месяцев назад

caught you in time on my lunch break

@SHSPVR 5 месяцев назад

Thanks but what cam did you get as you said you were going to tell us in the next video ?.

@jockojockoson9995 5 месяцев назад

Not convinced with these to be honest. My tuned 23 makes 187hp with a full Akrapovic system and DNA filter. No way is this worth doing for 3hp.

@rickmills1084 5 месяцев назад

i know that fella!!!

@exothermal.sprocket 5 месяцев назад

If the only numbers people pay attention to are weight and horsepower, they're missing half the equation. The GSX-R1000 is around 86 ft-lb torque. The Hayabusa makes 110 ft-lb torque. Tell me that's insignificant, and I'll sell you some ocean front property in Nebraska.

@barthutchison4207 5 месяцев назад

Kind of off topic but has your shop had any complaints about the new gsxs1000 engine knock on warm start up that lasts about 15 seconds. Years prior didn't do this nor did the k5 gsxr.

@Timfit4u.123 5 месяцев назад

Hey Chris, I have 2011 600 gxsr, and wanted to know if you'll do my ecu flash. Will it trip on the engine light or anything like that? I just do want to have to take it to the shop and have someone else work on something that I did to my 🏍.

@powamoto 5 месяцев назад

Ok Busa Time 🎉❤

@slowschoolofdriving218 5 месяцев назад

So your telling me a stock bmw s1000 with a tune makes the same power? Damn I’m impressed

@FairIsReal777 5 месяцев назад

Will these cams fit Gen 2 Busa engines?? Heard if you use 2 intakes cams it’s better performance? Any facts to this sir

@douglasgrosch228 5 месяцев назад

can you put ZX14 cam on concours 14-- web cams got ground cams for concours 14-- be great 20-30 hp on concours 14 with VVT! new

@RobertBulpitt-qq5bk 5 месяцев назад

I would had yoshimura high lift cams can not go wrong with yoshimura those busa engine's bullet proof

@x1boomer 5 месяцев назад

any specs for these cams, cam card available?

@Drunken_Hamster 5 месяцев назад

Hell, you could probably run it out to 12 or 12.5 with how that line looks.

@onealbarnes596 5 месяцев назад

Busa all day. Gixer mabe the weekend.

@soNso2 5 месяцев назад

Now a good head & that about all i need.

@nookied3735 5 месяцев назад

I'm asking because I dont know, but Brock's website shows dyno numbers for these cams putting out 210 hp and 120 ft. Lbs. of torque in a busa. Why is there such a huge power difference between their busa and this one? I'd invest in these cams for 210 hp and 120 lbs. of torque, but not for 190 hp.

@gaddy8964 5 месяцев назад

Brock's website was showing the use of race gas for the extra gains that's shown.

@h82bbad1 5 месяцев назад

Busa. Can't beat the comfort on a long ride.

@stevenallen4123 5 месяцев назад

Wya. How can I get my kx450 on the dyno

@R6GREG 5 месяцев назад

🔥🔥🔥

@americanbassin2648 5 месяцев назад

anyone know of any good shops in the phoenix area to get these cams installed and just to have a good shop on hand???

@mmahdim5912 5 месяцев назад

GSX-R 👑👑👑

@Indecline099 5 месяцев назад

Thinking about getting this for my busa. Anybody have a rough idea of what labor would be to have these installed

@dsvehaynes6043 4 месяца назад

300-350 at the dealership

@Wolverine249 5 месяцев назад

Riding that suz 1k is my choice

@user-lu1gm7uh2g 5 месяцев назад

My black bird 250 on nos

@teamgonzo9289 5 месяцев назад

Are the 'cams' re-grinde??? Or are they a Pacifically ground Camshafts???? Can you degree the cams for 'overlap'???

@exothermal.sprocket 5 месяцев назад

Pacific or Atlantic?

@HardlyaDavidson 5 месяцев назад

Do a Sportster S 😉

@Dan_Bell007 5 месяцев назад

Busa’s power for a 1300 CC bike, to me is disappointing. I feel they should be well over the 200 hp range. Especially a new model Busa. M1000, Zx10’s and the Ducati’s are all in they 200 HP range. To each of his own!

@michaelhudson303 4 месяца назад

Torque gets the bike moving,the Busa has a lot more than the bikes you named

@needmetal3221 5 месяцев назад

Do the cams need to be degreed in or just line the marks up?

@TeamMooreMafia 5 месяцев назад

Just line up the marks

@GLP3 5 месяцев назад

Where can I order the htp stacks?

@TeamMooreMafia 5 месяцев назад

Call us at the shop. 864-244-5447 ask for Shane.

@ecc5119 5 месяцев назад

This is a diminishing returns if the cam is too big for the port flow.

@TeamMooreMafia 5 месяцев назад

Where did you get your info?

@exothermal.sprocket 5 месяцев назад

Because Suzuki factory designed this bike to operate at max flow? No they did not.

@Scott_Buchanan 5 месяцев назад

I don’t like Busa’s but I’m here to see you work your magic 🪄

@inteligentvtec 5 месяцев назад

These are literally oem Suzuki gen 2 hayabusa cams.

@g13thware 5 месяцев назад

Chris can you put Cams on Ducati’s

@TeamMooreMafia 5 месяцев назад

We do not work with Ducati. Sorry

@Tech-ot4iy 5 месяцев назад

California should be subsidizing other states owners to drop in new cams, ridiculous.

@lewisallen3379 5 месяцев назад

CM$ 🤙🏾🙏🏾✌🏾

@shawnlisbon 5 месяцев назад

Yes yes yes!!! Lol

@christittle1131 5 месяцев назад

Hey Chris, on ninja 400RR besides ECU flash and slip on muffler what else could we get to step the bike up to 90H.P!

@MitEclipse91 5 месяцев назад

So he spent thousands of dollars for 5hp? Doesn’t seem worth it but hey it ain’t my money.

@vincesimard 5 месяцев назад

Why does a gsxr 1000 make 194hp and a 1300cc speed machine make "only" 190hp?

@exothermal.sprocket 5 месяцев назад

Why does the GSX-R1000 make 85 ft-lb torque, and the Hayabusa make 110 ft-lb torque?

@vincesimard 5 месяцев назад

@@exothermal.sprocket because the engine in the hayabusa is bigger. Bigger stroke = more leverage = more torque. I was just wondering why the busa couldn't rev higher with the new cams and velocity stacks. I was expecting at least 200whp but i clearly don't know much about busa's.

@wudntulike2no32 5 месяцев назад

One makes 190hp at 10k rpm and the other makes 195hp at 13k rpm.

@vincesimard 5 месяцев назад

@@wudntulike2no32 and in 2001, a gsxr made 160 @ 10800 rpm while a busa made 175 @ 9800 rpm. I thought the whole point of the busa was to be faster😅

@wudntulike2no32 5 месяцев назад

@@vincesimard busa was made for top speed, not acceleration and it achieved that with multiple land speed records.

@austinphelps444 5 месяцев назад

Promo'SM 👌

@marcusripley3677 5 месяцев назад

1000

@GidDree 5 месяцев назад

I want a Busa.....will trade my Harley.....PLEASE stop laughing...ty

@postmortemspasm 5 месяцев назад

190hp? ZX14r with exhaust have been making 205 since 2012. Thats pretty sad. Oh how the mighty have fallen

@joshuadavis7592 5 месяцев назад

😂😂😂 that extra 15hp you're talking about means nothing if you can't ride😂😂 that 190 will go to work on that 205 😂😂😂 the TQ is impressive tho!

@TeamMooreMafia 5 месяцев назад

You really have to ride them in person. Yes the HP on a zx14 is a lil' more, but the new Busa is a million times nicer to ride.

@postmortemspasm 5 месяцев назад

@@TeamMooreMafia Oh I agree with that, definately. I bet the bike is epic to ride

@postmortemspasm 5 месяцев назад

@@joshuadavis7592 okay... what if you can ride?

@joshuadavis7592 5 месяцев назад

@@postmortemspasm That would be a problem in a drag race between the two lol. I know what a few Super Stock riders went on the Hayabusa and the ZX14R. I just think it would be interesting to see the battle? In Super Stock, how fast do you think the Busa can go under the class rules with the addition of the cams? 🤔 As it stands, the ZX14R is hard to beat in that class. Don't think I'm bashing the ZX14R lol

@normestits3317 5 месяцев назад

Is 49 years of age to old for a Busa? Asking for a friend…..

@TeamMooreMafia 5 месяцев назад

Not even close. We have tons of customers in their 60s with busa!

@barackblows1942 5 месяцев назад

I’m 70 and have a 2022 Black and Gold Busa. 😎

@chirag4 5 месяцев назад

I am 49.5 Years, & own the 2022 Gen 3 Busa ...&... 2023 Ducati XDiavel ...&... 2021 Triumph Trident 660 ...&... getting delivery of my 4th bike - Triumph Scrambler 400X next week. Sold my first bike -- 2020 KTM 390 Duke after 3 years. Have never owned a BMW, Harley, Kawasaki, Honda, MV-A, Aprilia .... so they are on my wishlist. have owned 2 Yamaha sub-200cc bikes so not counting those