Installing Huma Air Regulator on FX Streamline 

True. I did my best at the time

@@jeff22airguns23 Don't get me wrong, I think your video is great. And I couldn't find any other one showing thie reg removal/installation for the FX SL. However I found one from Ernest Rowe showing a trick to bleed the Wildcat, which has a hole through which he can compress the valve stem. And guess what: the SL has got a similar hole. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-79PJ-cOtrac.html Note that I haven't tried (yet). I always try to figure out what can go wrong before I do sthg.. Making too many assumptions when playing with high pressure may result to disaster...

Thats true. Thats why I said on the description to unscrew the hammer spring at max for minimize that The best is not to do it but be careful with air

@@jeff22airguns23 thanks, I watched your video without reading the description my fault. Hopefully my valve is okay I'm just a little worried I might have bent it or something

@@jeff22airguns23 would you know the symptoms of a bent valve?

I cant say about the shot count: Im still in an "experience phase" so I dont really know, and I didnt note anything before installing the reg. Im now close to 1/2 m/s I was like 3/4/5 before installing the Huma. The power adjuster is still functionnal, it depends on the BAR setting of your regulator. My test was like 115/120 BAR is ok

I didnt get any screw too, I was lucky to find it in the toolbox Im sorry I dont know whats screw it is

@@jeff22airguns23 It's okay, thanks anyway

I cant really say, I think the most is the best

@@jeff22airguns23 Took me a while to figure out that you need the vent hole at the 12 o clock position, check the fitting instructions on the huma website. works alot better now

@@sambernard5119 oh great! thanks for the tip!