Installing MX Handlebars On My Yamaha MT-09 

Oh man I get it. I get nervous and the fear of screwing up an "upgrade" that'll eventually turns out to be all for nothing. Great job!

CC's attention to detail is immaculate. Impressive to say the least.

As a 10 year machinist let me give you two tips that will save you from having a tap go in cock eyed and possibly breaking. Get a T handle tap wrench and apply load evenly with both hands. Also for hand tapping for in one or two turn then back out a quarter turn. This will cause the chips to break and ease the progress forward. For stainless steel I recommend going less than .5mm or .010" larger on your recommended drill size this will make tapping far easier

0:25 gotta pay keen attention when I'm watching Chaos's videos. Haha, what a surprise to see my name on the screen. The bars look soo much slicker man.. Loving it 💪🏿

Love the way you dedicate to edit every shot on your videos! Greettings from Colombia 🤟🏼

the way you present, ur skills in motorcycle is such an inspiration. i really like ur video 🙏🇲🇾

OCD warning, you need to do something about the old mirror sockets... LOL!!!

I want a pro taper bar for my R3. You just showed me that there in no way I'm doing it myself. Thank you.

That looks so sick!!!!! Cool upgrade CC!

I would have just bought some push in and tighten with a an expanding mechanism bar ends, threading bars is a pain in the arse! Good job though

love the preset "filters" to your videos! So iconic and the attention to details is such an eye pleaser!

Huge thanks to The Ridge Wallet for supporting the channel! Here’s the site if you want to check them out: www.ridge.com/CHAOS10 Use Code “CHAOS10” for 10% off your order

5:48 where did you buy that clock

Liked it even before actually watching it..!! Keep the good stuff coming..!

Looks way awesome!! Looking forward to the future upgrades.

Yep, gonna watch this with some popcorns

I did the protaper bars upgrade on my Suzuki sv650 last week. Although mine was more of a task since I came from clip ons and had to upgrade brake lines and reroute my accelerator and clutch cables. I love the ride position now

tip ,,when drilling and tapping.. use regular oil insted of thin wd40..works better,,

That looks awesome. You did a f really nice job

I think you have FAR too much time on your hands! 😂🤣😂🤣 Good job on that new bar man! Looks really good! No go bolt down that vice before you hurt yourself! Again!

I like the stickers, all your mods so far are looking really good

You did a good job. I actually like that dark purple but I'm sure a black and white scheme will look great too.

Awesome video, as always. This channel is seriously underrated! For us newbie riders, could you maybe do a video explaining the monthly costs of owning a motorcycle? Keep up the great job man.

The bike looks lit af. You have great artistic sense. Clean mean and lookin pro

Exceptional as always. I really appreciate all the effort you put into your videos. Thank you.

Nice job man. Handlebars are looking awesome and the radiator cover is looking dope....Keep it up CC!!!

It's coming along really nicely

Your vids are just amazing You deserve at least 1 mill GET HIM TO 100K

Very nice looking bar, but strangely the new decals did it for me. Really suits it

That bike is taking with every treat that even envies many. Keep up the good work you do and look forward to seeing the next video CC. Peace ✌

Really cool man

Looking much better than stock. Great job!👌

Nice video as always! Keep up the good work and the engine revving!

I like what your doing to the MT09, gives me some ideas for my bike. You may need to check to see if you need a tail tidy on the seat with the removal of the passenger pegs?

Thank you! I've been inspired by your video to buy a handlebar for my own bike :) MT-07 2018

Never give up ... and you will be happy with what you have done! Nice bike and nice vid too!!!!

Really hard work Keep it up bro.. nice video

Hey man, what is the name of the measuring tool you used at 7:22 ? Also what size drill bit did you use for the holes?

Super cool as always!

I am watching your video when you are 50k and you are going to hit 100k.l wish you will hit 100k soon.#roadto100k

I always get nervous when I attempt a mod for the first time, but it feels really good when it works out.

Those black bars look so sick on that bike! Also love that they're a bit lower. I have the feeling that if I started doing any upgrades on my bike I'd discover I was missing something, then not be able to ride it for 4 months because it didn't have X attached to it. XD Great work and looking forward to more videos!

TapMagic helps sooo much with the bars

My MT and yours are surprisingly similar, same Andreani Misano forks, same Öhlins shock (stx46?), same full Akrapovic, same colour, same windshield...when you showed it for the first time I actually checked if mine was still in my garage :P Jokes apart, purple doesn't get me either, I'm planning to paint it with the new mt09 SP graphics (black-blue-silver)

Nicely done, looks great. I put the Henry Reed pro taper bars on my Z 1000 and love the look!

CC great content as always, glad to see that you're keeping the channel going even though you left Mzansi. Keep it coming bro

I just bought a 2015 mt09 (Orange tank) and love it minus the suspension. It is the worst on any bike I have had over the years. Even my 04 xt660x was better. Anyway the previous owner failed to mention the thread for one paddock bobbin is gone. Filled in with metal putty. Now I need to get that repaired. I can tap a new thread but this looked like the bobbin was snapped out of the swing arm. Need to figure out how to fill the hole. PS. Don't cut holes for the controls. Cut the plastic stubs of so you can move the controls. Use electrical tape on the bar then mount controls on tape to stop them spinning.

Love your video style man! The color too! What kind of color/ filter is that? Looks so cool, watched till the last second

Had plans to do this myself, but looks like to much work😅 ill go for a stock xsr 900 handlebar instead🤷‍♂️

Very good lookin now! Love the black !

Looking good, man! Looking gooood. Cheers.

Was waiting eagerly for your video☺️

Great As Always 💜

I remember back when I tapped my first thread. It felt like I had gained magical powers.

Honestly I thought it was just you looking for things to make the background more interesting 😂

Great video. Very informative. Thanks!

Epic mods, lyk baie mooi oom Chaos😉! Love watching your vids, keep up the good work here in Europe and good luck!

I thought for sure you were going to take the protaper logo off the bars. Looks great, though!

You videos really are awesome man .!

I don’t mind the stock handle bars. But good job prepping and installing the bars.

Been your Subscriber from 3k ..❤️ Always love the quality of the videos.

Should of used a Starter tapered tap. You used an Bottoming tap. Magnetic V block would be better to hold round bar stock in a vice. And a Tapping handle would help instead of a spanner

Yeah the new bar looks way better

1:14 look at the mirror 😂

So glad you got an mt-09 so I can add more mods to my wishlist. Those stickers on the "intakes" are sexy af. Btw, fix the ugly tail light. Get a integrated one that cleans up the rear, it's so worth it dude.

I ran ProTapers on both my old MTs. Only real issue is that it isn’t comfortable. It just sat too low. For stunting it was fine. But for commuting it was too low and uncomfortable.

Thats a good look for the bike. I like it. Iam exited to see the purple. This is one of my favorite colours :-) My plan is to buy a SV650 and tinker on it with the styling to make a SV650x blue ;-)

Nice bike for a nice upgrade So cool Man!

Love the bars. Might have to get some myself....and I drill and tap steel all day long so that ain’t no biggie. Got a 500 gram tub of tapping grease on my work bench. Makes it a piece of piss👍🏻

Hey man, nice work and nice channel. Which is the size of the drill? Thanks in advance

Well done! I have the same fear when doing something new on my own.

I know from watching your more current vids, you do not have this bike any longer. With that said, although I run Protapers on my dirtbike, I thought about them for my FZ09 (2017), but I did not want to use them because of the bright white and yellow logo, specifically the yellow. My 2017 has black forks, so I am doing my best to keep my bike almost all back and white.

looks lovely...

A battery drill with low RPMs and some old motor oil would turn that tap job into a 2 minute process. Great video!

you should consider changing the headlights to the new ones. That'll make your MT-09 completely like the newer ones !

0:17 ohhh crap. We have to watch your videos like Canadian Lad now.(as he does with MCU)

Wow, that was really cool

Keep the videos coming

You can consider putting the Protaper var on the bike for more stability

Do you have a link to where to get the music for your videos? Absolutely loving it!

Been waiting for this video :D Just received mine today.

really like your editing video

Ahh yes my time has come.

It would have been nice to see before and after videos of bar differences. And differences with person on bike with old handlebars and new ones. Otherwise good detailed install video.

awesome job man!

I may have missed something, where’s your R1? Great content and editing mate! 👍🏼

Will you do it also to your sports bike for more comfortable riding? But not as much as wide that one 😂

I did the same upgrade on my Honda NC. The drilling was awful, and found i didn't end up with enough space for all the switch gear, and never got the bar ends to work. Ended up switching it all back after about 6 months. What a waste.

"They grow up so fast" 🤣🤣nice work once again mate🙌🙌 How you settling into the UK?

Makeing a simple job hard threading them bars not just fixing the vice nown

Using WD 40 for lubricating the tap lmao. Actual madlad.

0 dislikes, keep it up. Nice vid BTW

You said "cheeky". You're officially British.

Loving the uk ??? What county u in???

i love them roads

Very nice, wish mine had gold forks and not the silver ones. I'd have to get someone to drill the bar for me, I'd just fuck it up 😂

Great video man

Almsot thought I was watching a wild animal in his natural habitat🤣🔥

Perfect bike bro

I put pro tapers on my ninja 300, one of the best mods ive ever done