Тёмный

Installing New Carpet in a Classic Mustang 

Andy Kruse
Подписаться 19 тыс.
Просмотров 2,5 тыс.
50% 1

Check out my website for car parts and merch that I am selling - krusebuilt.com/
In this video I install new carpet in my 1966 Mustang Fastback. I later found out that I think the carpet for a Convertible Mustang was mistakenly packaged as carpet for a Fastback, but I was able to make it work.
ACC Molded, Mass Backed, Black Carpet for Fastback: Amazon Link - amzn.to/3VRdnGt
The car is a 1966 Mustang Fastback with a 347 Stroker and T5 transmission.
Shot with GoPro Hero 9 with the Media Mod, edited on Davinci Resolve 17.
Gear I use:
GoPro Hero 9 Black - amzn.to/3ZCTpP7
Media Mod for GoPro Hero 9 - amzn.to/3CPKOi2
Rode Wireless Go II mic kit - amzn.to/3iJrj4c
GoPro Hero 8 Black - amzn.to/3QLpj7V
Media Mod for GoPro Hero 8 - amzn.to/3ZCAeoA
GoPro Hero 5 Black - amzn.to/3XuKMUQ
GoPro Karma Gimbal for Hero 5 - amzn.to/3GIWa8P
Want to help support this channel, you can "buy me a coffee", check it out! www.buymeacoffee.com/krusebuilt
Credit for the music in the video:
::::::::::::::::::::
Epidemic Sound
Try it today! www.epidemicsound.com/referra...
::::::::::::::::::::
#krusebuilt
#kruseview
#Mustang
#1966
#fastback

Авто/Мото

Опубликовано:

 

1 май 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 58   
@Glens1965
@Glens1965 3 месяца назад
Good Job. We always use a hot drift for the seatbelt/seat pan holes. Nice and clean and seals the the carpet from fraying. Plus the jute mat is a PITA to cut. FWIW ditch the firewall mat and use a good B-Quiet mat or alike. That old style mat will drive you to drinking. Putting it in and working around it in the future. Still have the scar.
@AndyKruseChannel
@AndyKruseChannel 3 месяца назад
Not sure what you're telling me, the carpet install is finished. :)
@AlfsMustangGarage
@AlfsMustangGarage 3 месяца назад
Dude, you're getting crazy good at editing your videos. Can I hire you to do mine? 😅 loving the switching back and forth between the truck and mustang btw.
@AndyKruseChannel
@AndyKruseChannel 3 месяца назад
Ha, I'm editing at a 4th grade level, at best. I think if it's good it's all luck. I'm not sure if switching between these two projects is good for my sanity, but at least it's more content for the channel. :)
@Mike-sh2dg
@Mike-sh2dg 3 месяца назад
Looks good! Once the seats are in no one will ever notice it’s the wrong carpet. One thought though, this would have been a great time to add dynamat or similar. It makes a huge difference in noise from the road and heat from the exhaust and drive train.
@AndyKruseChannel
@AndyKruseChannel 3 месяца назад
Thanks, but you and I have different plans for my car. 🙂
@SmackeysGarage
@SmackeysGarage 3 месяца назад
Probably one of the best ways to refresh the interior. Nice video!
@AndyKruseChannel
@AndyKruseChannel 3 месяца назад
Thanks! I just hope everyone else gets the correct carpet shipped to them. :)
@scottm405
@scottm405 3 месяца назад
Great job as always Andy! Love seeing the progress!
@AndyKruseChannel
@AndyKruseChannel 3 месяца назад
Thanks 👍
@williamdozier5190
@williamdozier5190 3 месяца назад
Looking Good , Andy👍
@AndyKruseChannel
@AndyKruseChannel 3 месяца назад
Thanks 👍
@pofomoco2
@pofomoco2 3 месяца назад
Another great video by an everyday mustanger like the rest of us... love the channel!!! My GT350H is not as far along as your Fastback but I will be utilizing many of your videos to make those future installs easier and less frustrating. Keep 'em coming!
@AndyKruseChannel
@AndyKruseChannel 3 месяца назад
Awesome, thanks for the feedback, and good luck with your project. :)
@moviemark5464
@moviemark5464 3 месяца назад
Thanks, Andy! Always like to see you work on your '66 fastback!
@AndyKruseChannel
@AndyKruseChannel 3 месяца назад
Thanks!! :)
@tommontague5721
@tommontague5721 3 месяца назад
That's part of rebuilding, (make it fit).... Well done Andy
@AndyKruseChannel
@AndyKruseChannel 3 месяца назад
Haha, thanks. :)
@wolfthornhawkridge5705
@wolfthornhawkridge5705 3 месяца назад
That’s awesome, I need to pick up a soldering iron. If I had your patience I wouldn’t be on my second carpet. 😆
@AndyKruseChannel
@AndyKruseChannel 3 месяца назад
Patience?! Ha! Remember, I am also the editor of my videos..... :)
@hughphillips67Mustang
@hughphillips67Mustang 3 месяца назад
That carpet looked new. To bad it won't fit in the truck project. This would have been a good time to put sound deadener down. Also good for reflecting exhaust heat from entering the car. Plus, it could have been another "how to" video for you to do.
@AndyKruseChannel
@AndyKruseChannel 3 месяца назад
Carpet was new, I think they just messed up at the factory. :)
@rcadd1ct
@rcadd1ct 3 месяца назад
Instead of a soldering iron you can hold a nail in vice grips. Heat the nail up with a torch. When done toss the nail. No clean up.
@AndyKruseChannel
@AndyKruseChannel 3 месяца назад
Yeah, that was going to be the backup plan if the soldering iron didn't work. I would have liked the 'less cleanup" option though. :)
@scottm405
@scottm405 3 месяца назад
I’ve paused the video to tell you that I am audibly gasping while you dangerously unpack the carpet next to the freshly painted car Back to the video
@AndyKruseChannel
@AndyKruseChannel 3 месяца назад
You're not going to like it when you find out I was grinding near the freshly painted car. :)
@5798Mike
@5798Mike 3 месяца назад
Looks good 👍
@AndyKruseChannel
@AndyKruseChannel 3 месяца назад
Thanks 👍
@rookie__pilot
@rookie__pilot 3 месяца назад
Love the thumbnail! 😂
@AndyKruseChannel
@AndyKruseChannel 3 месяца назад
Haha, thanks! :)
@PowerfulRoman
@PowerfulRoman 3 месяца назад
Great video!
@AndyKruseChannel
@AndyKruseChannel 3 месяца назад
Thanks!
@freezepunk111
@freezepunk111 2 месяца назад
Can you do a video about install of the fold down rear seat? Your videos are super helpful.
@AndyKruseChannel
@AndyKruseChannel 2 месяца назад
I’m not sure it would be helpful enough. There’s on a few screws and bolts, and aligning the folding seat part is dependent on the car itself in. I remove it my video with the rear shocks, maybe there’s some help there?
@freezepunk111
@freezepunk111 2 месяца назад
Ok I’ll take a look. Thanks!
@flipflopsgarage
@flipflopsgarage 3 месяца назад
At least you didn't measure 3 times and still get the hole 6 inches off target
@AndyKruseChannel
@AndyKruseChannel 3 месяца назад
That's what all the fancy editing is for. :)
@domfer2540
@domfer2540 3 месяца назад
It is easy. It is a great time to put insulation on sound padding.
@AndyKruseChannel
@AndyKruseChannel 3 месяца назад
Even if the carpet is already installed?
@Adam-tl6wh
@Adam-tl6wh 3 месяца назад
Great video! I’ll be doing mine soon. Is it not worth the time and money to put in sound deadening mat?
@AndyKruseChannel
@AndyKruseChannel 3 месяца назад
That sound deadening May is a great upgrade for most. But it’s not something I am concerned with. 🙂
@scottlevy3274
@scottlevy3274 3 месяца назад
not gonna por15 the floor? all that exposed metal will rust. plus, from experience, those mass backing carpets hold a lot of moisture to the floor.
@AndyKruseChannel
@AndyKruseChannel 3 месяца назад
Nope. :)
@DMUSA536
@DMUSA536 3 месяца назад
Put the carpet in the sun if possible to help it relax.
@AndyKruseChannel
@AndyKruseChannel 3 месяца назад
Too late, it's already in the car.
@DMUSA536
@DMUSA536 3 месяца назад
@@AndyKruseChannel yeah just helping others
@moviemark5464
@moviemark5464 Месяц назад
Hi Andy! Quick question: when you are working with your doors open, do you just disconnect the battery cable so that the interior lights don't come on or is there a trick to disable the interior lights when the doors are open? When I work I have them open for hours and don't want to drain my battery. I tape the buttons down but after an hour they pop back up. I know, weird question but I am a noob getting deep into restoring my '66 Fastback. Thank you and love the content and following your journey. Your car is amazing.
@AndyKruseChannel
@AndyKruseChannel Месяц назад
If I know I'm going to have the doors open for a long time, I just disconnect the battery, nothing fancy. Because of my smaller garage, I usually have to close the door to get around it, then open it back up to get in, realize I grabbed the wrong tool, close the door to get by, etc. :)
@MattandHeatherSumners
@MattandHeatherSumners 3 месяца назад
If you’ve got a steam gun, that’ll help you mould the carpet into place. In the awkward places. That’s what I’ve used in the past.
@AndyKruseChannel
@AndyKruseChannel 3 месяца назад
That could have helped, but it’s fine for now. This summer will do all that work for me. 🙂
@franswijnands4022
@franswijnands4022 3 месяца назад
it is better to use a soldering iron for holes in your carpet
@AndyKruseChannel
@AndyKruseChannel 3 месяца назад
Hmmm.....
@timrayburn2461
@timrayburn2461 3 месяца назад
Great video.Is that Wimbledon white ?
@AndyKruseChannel
@AndyKruseChannel 3 месяца назад
Thanks! Yes, wimbledon white with the guardsman blue stripes. :)
@timrayburn2461
@timrayburn2461 3 месяца назад
@@AndyKruseChannel Thanks
@grfilmz8363
@grfilmz8363 3 месяца назад
Let me buy the old carpet!!!
@AndyKruseChannel
@AndyKruseChannel 3 месяца назад
I’ve selling it, but shipping will probably make as expensive or more than new carpet. 😐
@grfilmz8363
@grfilmz8363 3 месяца назад
@@AndyKruseChannel I wonder how much??
Далее
New Aluminum Driveshaft
18:38
Просмотров 994
How Much To Paint The Mustang?
18:25
Просмотров 25 тыс.
Revology 1968 Mustang GT 2+2 Fastback Cobra Jet
31:03
Просмотров 866 тыс.
Will the 347 Stroker fire up on the first try?
18:25
Просмотров 4,7 тыс.
Shelby Drop
10:28
Просмотров 7 тыс.
TOUR: Jeff Catlin's MUSTANG Collection!!
27:08
Просмотров 409 тыс.
SELLER'S BIG SCAM AT THE MECUM MOTORCYCLE AUCTION!
21:59
Dyno Results on 347 Stroker!!
17:45
Просмотров 14 тыс.
When The Mustang Ditched Its V8 For A Turbo 4
13:24
Просмотров 88 тыс.
New Mirrors and Paint Restoration
16:22
Просмотров 1,2 тыс.
86 Mustang - Interior Refurb Ep. 1
25:05
Просмотров 729