Installing Two Amplifiers underneath a seat in a Chevrolet Tahoe - Part 2 - Under $275

Подписаться 239 тыс.

Просмотров 652 тыс.

50% 1

Part 2 of our installation on a 2002 Chevy Suburban! This part focuses on installing two amplifiers underneath the left rear passenger seat. One of our Blaupunkt amplifiers is a Class-D for our (2) 12 inch subwoofers. The second Blaupunkt amplifier, runs all four of our component speakers in the doors. We show how tro built the entire amp rack with full wiring. These two amplifiers are under $275 and will make an amazing upgrade to the most basic car audio system.
Ferrule Crimping Tools:
Stinger Ferrule Crimpers: www.qualitymobilevideo.com/sp...
8 Gauge Ferrules: www.qualitymobilevideo.com/sp...
12 Gauge Ferrules: www.qualitymobilevideo.com/sp...
18 Gauge Ferrules: www.qualitymobilevideo.com/sp...
Tools Used:
Klein Diagonal Cutters: www.qualitymobilevideo.com/d2...
Klein Wire Stripper and Cutters: www.qualitymobilevideo.com/11...
Metra Pick Set: www.qualitymobilevideo.com/ib...
Klein Diagonal Cutters: www.qualitymobilevideo.com/d2...
Klein Tools Reversible Ratcheting Box Wrench Set: amzn.to/2W2gMVf
Swivel 3/8" Ratchet: amzn.to/2EsIpMc
Panel Pry Tools: amzn.to/2VJK9q9
Soldering Helping Hand: amzn.to/2M4pIEJ
Wire Pants:
10-12 Gauge Wire Pants www.qualitymobilevideo.com/43...
14-16 Gauge Wire Pants www.qualitymobilevideo.com/43...
16-18 Gauge Wire Pants www.qualitymobilevideo.com/43...
16-18 Gauge Wire Pants www.qualitymobilevideo.com/43...
14-16 Gauge Wire Pants www.qualitymobilevideo.com/43...
Miscellaneous Tools:
Countersunk Cap Screws: amzn.to/30AKZsW
Socket Head Cap Screws: amzn.to/2EtARZO
Button Heat Socket Cap Screws: amzn.to/2M9loEl
Aluminum Insert Nuts: amzn.to/2W8imoE
Miscellaneous Gear:
Tesa Fabric Tape: www.qualitymobilevideo.com/51...
8-1/2" Cable Tie: www.qualitymobilevideo.com/l-...
Adhesive Backed Cable Tie Mount: www.qualitymobilevideo.com/77...
Kester Solder: www.qualitymobilevideo.com/at...
Metra IBR32 Heat Shrink Tubing Kit: www.qualitymobilevideo.com/ib...
QMV Heat Shrink Tubing Kit: www.qualitymobilevideo.com/hs...
Clear Heat Shrink Kit: amzn.to/2YMuNDa
3/4" Flex Loom: www.qualitymobilevideo.com/sl...
#blaupunkt #caramplifier #audioinstallation #caraudio

Авто/Мото

Опубликовано:

10 дек 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 374

@Qualitymobilevideo 3 года назад

Who's ready for Part 3!?

@joseluisruiz3789 3 года назад

Here!!!! I can't believe what you had to work with. I haven't seen a wire mess like that in years, The VCR was Nostalgic though.

@darrianbenjamin7292 3 года назад

Drop it!.I'm new to the channel but I like the fact that your videos and vehicle are more in line of what most people would be installing. Every doesn't have a brand new vehicle and unlimited budget for equipment. You're install is high end. Great job

@cocomaster3755 3 года назад

So soon?? 😂 OF COURSE

@nobodysfavourite6953 3 года назад

Can't wait!

@pgboyinthehouse9041 3 года назад

@@darrianbenjamin7292 100% agree. I get tired of reading comments about they should of used this brand of amp. Or that brand of speaker. Not everyone has a sky's the limit budget. They just want some better than factory sound in their daily driver. Hell most of my gear, is stuff I've collected over the years. Some really good upper end stuff. Some middle of the road stuff. All that matters is that I'm happy with it. Lorenzo did a great install with his customers budget in mind. I'm pretty sure the customer will be happy when he hears it.

@gordonellisjr331 Год назад

I have to say I am impressed with your attention to details from the use of nut certs in the plastic panel to counter sinking the mounting holds for a flush fit and laying out the wiring in a very clean organized way. From one professional to another. I would be proud to have you in my shop. Top notch.

@todokete6016 3 года назад

I loved doing installs like this as a hobby in my own cars, in the cars of my friends and for some of my relatives. The passion started in high school and continued on well past post-graduate educational training. I’m well into my 40’s now with my own children and hope to teach them things like this. As you can very well see, doing something like this takes patience and planning and foresight. Of course you can just plug everything in then just let the components float around in your trunk & under your seats, but part of my own satisfaction was routing the wires, cutting them to the exact lengths needed, crimping or soldering the cable ends on then securing & protecting the ends with shrink wrap. Man, as many have already stated, this is a very clean install and watching your painstaking attention to detail was more than satisfying. It was downright therapeutic! Keep up your awesome “functional artwork”. Regardless of how old or beaten-up any car may be, it can always benefit from an upgraded audio system. Thank you so much for your video(s)!

@Crispy77760 2 года назад

i too like this but i move stuff around a lot so i tend to have extra wire as to move things without disconnecting i just added connector to my wires that should make things easier

@jaybrock1861 Год назад

I am like you in my 40's and I started in high school i have 2 kids 22 and 16. I did not realize kids were still in too putting systems in cars till i saw my son watching a youtube video when he was about 14. I asked him you like that he said "i cant wait till I get my car and put a system in it. So I gave him my old car and we started working on a system in his when he 15. On his 16 bday took him to get his DL and let him drive on to school. I will always remember him pulling out the driveway that day and turning up the music headed to school.

@gioarteaga3984 3 года назад

I'm ready for part 3 bro I love watching installation well done

@thetoolwallchannel 3 года назад

Fantastic video! Excellent design. Excellent tools. Excellent techniques. I can tell this is years of experience being put into practice. I especially like the ABS amp mounting plate idea. Well done!

@Qualitymobilevideo 3 года назад

Glad you enjoyed it!

@adonisman808 3 года назад

Shout out to car audio installers, they really gotta love what they do because that work can be painstaking and back breaking

@MadClowdz 3 года назад

And those of us who watch these for guidance cuz we can't afford to pay someone else and do these things for the first time on a gravel driveway with no garage, no nice table saws, routers, etc...in July...in Florida...nevermind, we're just crazy...

@idk420blazeit 2 года назад

@@MadClowdz basically in the same boat as you... I just did it in January/February in Tennessee... Was freezing and raining-- i was just out there by myself wiring everything up 🥶

@MadClowdz 2 года назад

@@idk420blazeit it is rewarding to do it myself and appreciate a job well done. Also good learning experience as I troubleshoot and fix things like for instance the Kicker KEY2004 I installed behind the dash didn't have enough slack on the harness so it was pulling the speaker wire pins back in the harness connected to the amp and losing signal. I got a length of speedwire and added 10 inches and soldered it all together with shrink tube...no issues since. Plus I soundproofed all 4 doors and wow those kicker KSS 6.5 components really shine now. Can't wait to add the HS10 😁

@idk420blazeit 2 года назад

@@MadClowdz took the words out my mouth... Felt like such an accomplishment that i sat in my truck for like an hour just playing music 😎...

@jdubb21autoworks21 2 года назад

I do it personally and it’s fun, I’ve been doing it for years

@ManuelHernandez-hg3ez 3 года назад

You know he loves his work with all the detail he does great job!

@Qualitymobilevideo 3 года назад

No doubt!

@MrHIPNOE Год назад

This probably the only video I found that actually shows you the whole process step by step ! Thank you!

@todizzle666 Год назад

If you need this to hook up your system you should not be doing it at all. I feel like you need at friend or something to help you because there is a lot more to it then whats going on here and certain things do t need to be done unless you have an amplified system in your stock vehicle

@MrHIPNOE Год назад

@@todizzle666 lmao

@ambesa1 Год назад

this install is amazing. and i want to install two amps in my vehicle, now i have to study this video so i can assure a clean , organized install.

@acokedupmonkey3762 2 года назад

Your work is beautiful man. Awesome job.

@thudeets 3 года назад

That's some eerily hypnotic background music, man. Thumbs up on the video.

@Qualitymobilevideo 3 года назад

Glad you liked it!

@NontypicalCaptain 2 года назад

That speaker wire trick with the drill was slick

@ornelaskev1988 3 года назад

Very well thought out and clean work . now I want to go rip out all the wiring in my car

@jesonkuttan 3 года назад

🤣

@noemartinez5111 3 года назад

now that is a clean install.

@americanmonster4983 3 года назад

I like that you guys use ferrules, very, very, nice quality work fella's!!!!

@Qualitymobilevideo 3 года назад

Thank you very much!

@dna59 3 года назад

Great install. I see a lot of ppl are salty about the gear that was put in but regardless all equipment deserved a quality install. This is surely a huge improvement than before in everyway.

@jrockaz548 3 года назад

It's all about budget and expectations ppl are dumb not everyone has 3k to drop on a system

@Titans2138 3 года назад

@@jrockaz548 I hear you but I think people expect amps to do their rated power. Blaupunkt is almost as bad as BOSS in that area. I don't think anyone should hand over their money to a company who lies and counts on the consumer being uniformed. I'm sure they used CCA wire too. I feel like CCA wire is dishonest. I think most people who have CCA wire in there car just aren't educated about the subject.

@JimmyTheProstitute 2 года назад

@@Titans2138 CCA wire isn't bad depending on your application. If your wire can handle the amperage you are sending to it then it's not a big deal. If you are trying ti maximize your peer based in the gauge wite you are using then OFC is your best bet. But I think CCA is something like 70-80% efficieny of OFC. So if you have oversized 1/0 CCA for a monoblock 4 gaguge input amp and you have calculated your required amps you will be fine.

@25hztolife86 3 года назад

Was up guys.....good to see an install video. Lorenzo good job. Now have the Italian do it too.

@Qualitymobilevideo 3 года назад

LOL I gotta hold the camera!

@Sherif_ElGizawe_01 2 года назад

Very good and clean job Will done man . Wish to learn more from your videos 👍

@Qualitymobilevideo 2 года назад

👌

@bernardarmstrong7050 3 года назад

Brother your work is just awesome!

@Qualitymobilevideo 3 года назад

Thank you so much 😀

@hippo-potamus 3 года назад

Damn, looking super nice.

@ncustis6262 2 года назад

This guy is a true professional.. I would love to hire him!!

@Qualitymobilevideo 2 года назад

Thank you!

@lokoma1845 2 года назад

Clean work 💪

@michaelnelson8357 3 года назад

Motivation. Clean work 💪🏽

@Qualitymobilevideo 3 года назад

Always!

@PETERGUNZZ559 Год назад

Great job bro! Props!

@robertehlers4330 4 месяца назад

Bro the way you twisted wit drill genius

@HUMZMIC1 9 месяцев назад

Awesome video & clean install (I LIKE)

@Qualitymobilevideo 9 месяцев назад

Thanks! 👍

@SoundstreamTVNetwork 3 года назад

Clean install!!

@Qualitymobilevideo 3 года назад

Thanks guys!

@dickdog1 3 года назад

Amazing work. Thanks.

@Qualitymobilevideo 3 года назад

Thank you too!

@lewistaylor2979 3 года назад

What type of wire did you use in the 9 conductor, love the twist in them to help keep them tight.

@ungalottunarnoor6278 3 года назад

Really good fit for 🚗 🚘

@hectorlozada2503 3 года назад

nice and clean work

@Qualitymobilevideo 3 года назад

Thanks 👍

@XxTrustNoOnexX 3 года назад

Nice vid!

@rashad5286 2 года назад

Awesome install. Quick question did you bolt the ground wire to the floor using a rivnut insert ?

@darrellhenderson1459 2 месяца назад

Nice work

@7munkee 3 года назад

I might have missed it, but did you have 2 fuses? 1 close the battery in addition to the one right before the distribution block?

@travisdilligaf3544 3 года назад

Very very nice work sir.

@Qualitymobilevideo 3 года назад

Thank you!

@nanzNethan 3 года назад

Shout out to the camera man for getting them clean shots. Great install 👌.

@Qualitymobilevideo 3 года назад

Thanks bud 👌

@randyanderson4360 3 года назад

Yea give your camera man the day off cause I know his upper body was tired

@rogerallen665 Год назад

Outstanding work and video. Wish you were in the U.K.

@mrich7363 2 года назад

i really enjoy this, and i myself does it but my problem is i have to order almost everything now i know you probably order as well but the smallest of thing you can run to the hardware store not me that easy. Small island boy and we are limited to good stuff .Love your installs

@Qualitymobilevideo 2 года назад

Thank you!

@luispages Год назад

great used for the tools you showed... rivnut tool it's great size and handling's

@singl-eo1sw Год назад

awesome work i like that good work 2 thumps up like it

@Qualitymobilevideo Год назад

Big thanks

@hedbngr666 3 года назад

Them Blaupunkt amps look pretty sweet! Didn't think they were still around.

@MotoAtheist 3 года назад

They are low end base model stuff these days.

@robertehlers4330 4 месяца назад

Yea rock bottom amazon be selling for 40 to 60

@blackcaesar8327 3 года назад

I wonder how many times that he cussed out those little screws 😂

@Orphanfanny 3 года назад

Hi Lorenzo great To watch. Very Clean and tidy. Have question. Not Started yet but got most of what I need. X-type jag screen head unit. Very Silly Question. 4 speaker's to head unit (8) cut connect wires to Amp. Other 8 to RGB converter from head unit. If I still wanted to use head unit as normal can you get a 3 way splitter to cross wires back to Standard. I know you're thinking why would you do that. I want to be able to use both. Only using the Amp as & when. But also using Car Standard too. I think I've worked it out. I wondered if they was a unit that can do this? I found a 4 way shut off. Yes means clicking 4 switches to turn them off. But not Cross over on to Standard or back to Amp. Also adding a on/off to Remote wire. This would shut Amp off but be nothing sound wise. The unit with 4 on/off on it looks pretty easy to modify to 3 way to cross over. Is they a unit Out there without getting messy. Hopefully you understand. I'm no Expert but can do most things. Hope you can help. 👍

@ckman4106 2 года назад

Nice job

@overgrowthplanet7531 2 года назад

How did you go about hooking up the remote wire or wires

@nickdibart 2 месяца назад

I have that 4-channel amp and had some issues with it going into protect mode, but I was also running it bridged. Regardless, I mounted an 80mm pc fan w/ relay inside the chassis, and it hasn't gone into protect mode ever since.

@CLPATTERSON 2 года назад

Clean install, now the system is worth more than the rig lol!

@kagisomolosi5975 2 года назад

SUPER CLEAN

@Qualitymobilevideo 2 года назад

👌

@pulsedream 7 месяцев назад

I’ll take a great install any day.. because you can always buy great gear but great install is hard to come by.

@Qualitymobilevideo 7 месяцев назад

😎👌

@banitazmw34 2 года назад

Wow that's 🆒 I do installations too in my country but not as clean job as yours access to good quality wires and tools is hard wish i can visit your country and work shop and see how you do it.

@manojs139 3 года назад

Super nice

@mrtv8477 2 года назад

how can amp burn without burning battery line fuse (60amp) and amp fuses (30amps x 2 fuses). i thought fuses would burn before the amp does! but my amp burnt :(, isit because my fuses have higher amps than the amplifier can handle

@ty423 3 года назад

That power distribution block has more technology built into it then the whole truck itself....good job on the install as always.

@Qualitymobilevideo 3 года назад

😂😂

@damienfrizzell9394 9 месяцев назад

wtf

@Surroundnutz7107 3 года назад

Is it good to zip ties speaker wire and power wire?

@rickybobbygang6677 3 года назад

What lines did you tap into ? Did you unplug anything

@Jables77 2 года назад

Which brand of multiconductor 4 channel speaker wire are you using?

@rickybobbygang6677 3 года назад

I have 2000 Chevy Tahoe I want to know do I have to bypass factory amp.?

@ygbodybuilder3023 2 года назад

Quick question. Let's say I already have my two amps wired to the main battery thru a Distribution block. If I add a second battery could I just run that battery to the main battery. Will it still supply extra power and work correctly.

@javiertrujillo1916 2 года назад

so on a 2003 Tahoe where would you tap the 9 wire conductor

@ryanhebert1394 5 месяцев назад

Can you provide a link to the cable ties you use with the screw mounting holes? Ones yo used at about 21:10. thank you! and great attention to detail! my OCD thanks you!

@eseniteowlcg5067 Год назад

Hi, what's the purpose of taping the entire two rca Jack's? Curious to know and learn

@JSC2040 2 года назад

where did you get the purple wire for the speakers

@tonytherrien6100 3 года назад

what was the sack in the glove box?

@robertehlers4330 4 месяца назад

Quick question old mercedes got two agm batteries stock one bigger one and one small aux one i am gping to run 3 amps totaling 1400rms is that enough or what should i do should i add another bat. Cant afford high output alternator. Its not dimming or giving me problems at all with two amps 1000rms so another 400 rms think i be okay?

@izaiahlujan6718 2 года назад

Great video!! Makes me wanna redo my whole setup

@Qualitymobilevideo 2 года назад

Go for it!

@dopedickinsonbb8359 2 года назад

So if i have two amps, i have one mono for my subs an a 4chan for my mods an highs… would i need a deck with 6 rca preouts?? Cuz i messed up bought one that only has four… or am i ok

@JulioRodriguez-jj6wx 3 года назад

Buen Trabajo 😎👍💯🔥🔥🔥

@Qualitymobilevideo 3 года назад

Gracias!

@HNiCDuke Год назад

Can you ground to the same spot for 2 amps?

@robertehlers4330 4 месяца назад

Quick question thos old mercedes 04 driving me nuts new xtr9n head unot keeps rebooting what could it be?

@meerkhan4404 3 года назад

I have these amp they are so wonderful I had high end amps now sounds as clear as this

@johnathanlyles6073 2 года назад

I was looking for this comment! I'm looking at them myself. Just a decent budget build for a everyday driver! So I'm pulling the trigger on the pair!

@angelaarredondo7987 2 года назад

Which is the positive black or blue

@robertehlers4330 4 месяца назад

Blue lol 😆 anyway I thought for how cheap they are those amps would be trash what do you think?

@angryedm4580 2 года назад

Wait how did u wire those speakers , I have those and they don't sound that good

@jam14e1 2 года назад

Love ur work u need to move to London mate 😂💯👍🏾

@Qualitymobilevideo 2 года назад

😂cheers

@crazyscott71 3 года назад

I would have soldered the wiring to the boxe terminals ive had bad luck with those coming off

@AccuracySpeaks Год назад

Was that a VCR mounted under the seat before??

@karmaholt3734 3 года назад

Where are you located i need my stereo installed correctly

@heiaheiaheiahei Год назад

I started to think about upgrading the sound system after watching your video, great content, well organized and so tidy, BTW, what is the device shown at 26:44?

@tamareharrison1164 Год назад

I wanted to know the same. I just use a battery when testing

@aracelihruiz1064 2 года назад

Have a question installing two kicker l3 and two alpine amp . I wired the speakers down to 2 ohms they two dual voice coils . Now my question is should I wire capacitors with the system have been watching you and I think I can get a good answer from you since no one else could answer the question

@Qualitymobilevideo Год назад

You are better off running larger gauge wire than a cap.

@jlancepolk 2 года назад

Great vi. What is the Lo-Fi track at 12:55? Thanks!

@RedStar18 Год назад

Why you use mono? If you have some speakers running in stereo system?

@meerkhan4404 3 года назад

U remind me of mean good job clean and neat

@davidalvarez-lucatero9931 8 месяцев назад

Any chance you have a more detailed video on bypassing the factory amp?

@Qualitymobilevideo 7 месяцев назад

We have at least two on the channel!

@wolfhound1a 3 года назад

Whats the name of that rivet gun?

@johnespinoza2063 Месяц назад

Do you just tap in the speed wire to the amp

@alfalf2417 3 года назад

I think that the battery is dying on your music player 😜😂

@KennyHutton 2 года назад

You’re out there doing some damn fine work. Hope you got paid big for this one, cause I know that took some time…

@Qualitymobilevideo 2 года назад

We don't do installations but we want everyone to learn and love Car Audio! 👌😎

@robertehlers4330 4 месяца назад

@@Qualitymobilevideoa+

@HifiVega 3 года назад

Doing gods work Lorenzo! That install was a hot mess

@Qualitymobilevideo 3 года назад

LOL Appreciate it!

@russlora 3 года назад

His install is better but not up to what im usto doing ..Someone brought me those Rca's or that wire to use ...I would have to get them to go get some better stuff ,,No freaking way I would use those crap amps .I guess im just usto a whole other level

@russlora 3 года назад

@Hello There I install for nashville music executives, and country music artists. I know they have much more funds then were seeing here but if your gonna redo a crap install at least use good stuff .The stuff being used here is things you would find in a cheap install kit man .yea I do the speed typing method. Those amps in like the 80' 90' s were pretty good but now there just terrible quality

@robertehlers4330 4 месяца назад

@russlora the wires ain't that bad bro those amps on the other hand trash truck never say what the true rms is. For what he had perfect install I am sure he could have used mdf or fiberglass and made plexi windows ne9n and all but fast clean install

@poxcr 2 года назад

Hi guys! Not sure I picked up how were the remote turn on wires connected? Were they just daisy chained or connected together? Where did you take the source turn on signal from?

@Qualitymobilevideo 2 года назад

Yes, they were daisy chained from the aftermarket headunit.

@alexandermiranda8628 3 года назад

Donde puedo conseguir ese alicate para ponerle esa cosa negra a los cable donde se consigue

@ronnydewailly7045 3 месяца назад

I've had no luck trying to find that stinger shrink wrap.

@thatguykai479 5 месяцев назад

You only need RCAs connected if you have a after market radio and you want to control it from there other then that your already pulling signal from the speed wire connecting to the front

@ridzwing927 8 месяцев назад

Trying to figure out where the best place would be to put my 4channel and monoblock amp in my 06 gmc Sierra

@Qualitymobilevideo 7 месяцев назад

Probably on the back wall or under the seats.

@wazid0122 3 года назад

didn't c the link for the speaker wire harness

@bpintogsxr1000 2 года назад

Great work! Not trying to be negative at all but blaupunkt? With those subs and the install I figured a better amp would used.

@Qualitymobilevideo 2 года назад

Thanks! Not our system, it's what the customer could afford. The video is more about how to install two amps, not about having the most baller amps

@mikayiltanr4851 2 года назад

Bravo tebrik ediyorum seni işini temiz ve güzel yapıyorsun

@0togtr811 3 года назад

It looks like to twisted that 18 awg wire abit too much... Would it not have been easier to wire the amp rack out of the car and then just run the wiring forward?

@robertehlers4330 4 месяца назад

No he is perfect period 👌 how you gonna say one word but amazing install 👏 you a jit