Buy www.etsy.com/l...
This tube is suitable for water-based or solvent based gutta resist.
Immersed the glass tube in gutta resist.
Take the rubber pear. We remove the air from it completely. Press the rubber pear in the wide end of the tube.
Collect the gutta to the middle of the glass ball on the tube.
Take the tube out of the gutta.
Wipe the tube with a cloth from the resist. Turn the tube tip to the top.
During operation, make sure that the gutta resist does not flow from the other end of the tube!
Bring the tube with the gutta to the pattern on the fabric. Turn the tube tip down.
Put the tip on the cloth. Hold the tip of the tube at an angle of 90 degrees to the fabric.
Wait when the gutta approaches to the fabric.
Move the tube along the contour of the picture slowly and evenly. Tightly touch the tube to the fabric.
Drawing a part of the line for the first time should stop.Turn the fabric on the other side and make sure that the gutta resist soaks through the fabric.
If the reserve soaked through the fabric, continue to work.
If not.
Rubber pear press it to the end of the tube and blow the gutta from the tube into the bottle.
In a separate bottle we make the gutta resist more liquid. Adding water or solvent to it, depending on what basis the gutta.
Repeat all actions.
Care for the glass tube for the gutta resist
Remove the liquid from the tube. Blowing it out with a rubber pear.
Rubber pear we take the solvent in the tube and blow it back. Repeat these actions several times.
Blow all solvent from the tube
Wipe the tube with a soft cloth
Put the tube vertically with the tip to the top.
30 сен 2024
