Introduction to MicroCap for Beginners Kiss U107 - part of Kiss University

Подписаться 31 тыс.

Просмотров 17 тыс.

50% 1

This video will be an Introduction to MicroCap for Beginners Kiss U107. This is a type of beginners guide to SPICE and Micro-Cap. #microcapforbeginners #microcaptutorial #micro-cap #kissuniversity #kissU
If you haven't heard - you can get Micro-Cap from Spectrum-Software for free, so help spread the good news that Micro-Cap SPICE Simulation software does not any longer cost $4500, it is now Free. It is one of the best SPICE simulation programs out there. This is a limited time offer, so get your free spice simulation software today.
Spectrum-software site closed but you can find it here, and it is pretty simple and fast to make an account. Once I finally get my website up, I'll have it there as well:
groups.io/g/FreeEDA-Tools/fil...
Micro-cap Tutorials playlist link:
Micro-Cap • Micro-Cap
Micro-Cap Tutorial #3: • Micro-Cap Tutorial #3:...
Micro-Cap Tutorial #2: • Micro-Cap Tutorial #2:...
Micro-Cap Tutorial #1: Tube Amplifier • Micro-Cap Tutorial #1:...
Micro-Cap SPICE Simulation is now Free • Micro-Cap SPICE Simula...
Boost Converter Introduction • Boost Converter Introd...
Link to GW Instek: amzn.to/2ZattLT
You can support this channel with this link to Patreon - I really do appreciate your support?
Patreon.com/KissAnalog

Наука

Опубликовано:

26 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 104

@xuexi1137 3 года назад

Thanks for teaching us how to use MicroCap. All your videos are clear and easy to follow. Could you tell me how to set up the magnifying glass cursor you used in your video ?

@KissAnalog 3 года назад

Thank you - I appreciate you! That comes from the editing software no from Micro-Cap;)

@dw6528 Год назад

Wonderful! I was still able to find a downloadable copy - and will be following along with all of your excellent tutorials on its use. Sincere thanks!!

@KissAnalog Год назад

Thanks so much!!

@wahng9552 3 года назад

I have just recently discovered your channel and am loving it. Being trying to view as many of your videos as possible but there are so many ! Thanks for passing on your wealth of knowledge,

@KissAnalog 3 года назад

You bet! Thank you - I appreciate you:)

@davidlavasani8637 7 месяцев назад

Hey Eddie , god bless you. Thanks for these videos , so clear and nice. 🙏

@KissAnalog 7 месяцев назад

Thanks so much! I appreciate you!

@stryderx1 3 года назад

Thank you again for the good video. Because of your first micro-cap suggested video I downloaded it and started using it instead of of ngspice text based simulation. It saved a lot of my time for basic circuits/fragments testing.

@KissAnalog 3 года назад

That's great feedback - thank you! I'm glad that it helped;)

@deserteddrake 3 года назад

Eddie Yahoo again :) This was great work...thanks for the video and a merry christmas!

@KissAnalog 3 года назад

LOL I have friends you call me that;) I once had the Yahoo email address but ATT didn't let me renew it...:(

@ancientwaiting 2 года назад

Thank you great tutorial, very happy to see old people still energetic and happy, best wishes!

@KissAnalog 2 года назад

LOL thank you:)

@donmitchell3566 3 года назад

I am thrillled to find a knowledgeable person (you!) that talks plain in tech speak! Thanks for your efforts and care to share.

@KissAnalog 3 года назад

Thank you! I appreciate you!

@davidgriffin79 4 месяца назад

41:18 It has an analogy with mechanical engineering and Newton's third law: "For every action there's an equal and opposite reaction"; that is, a force or forces (F1, F2, etc) are exerted on a body, then at the body constraints there will be a reaction (R) equal and opposite to the sum of applied forces, such that R-(F1+F2)=0; there are many analogies in engineering like this.

@KissAnalog 4 месяца назад

Great feedback! Thank you!

@sunuk1915 3 года назад

Thank you dear for new episode 🤩👏👏👏👏

@KissAnalog 3 года назад

My pleasure 😊 You are always appreciated;)

@dimitrispapis634 3 года назад

Hi Eddie, another awesome presentation, Happy new year!

@KissAnalog 3 года назад

Thank you so much! I just posted another Micro-Cap video on RC filters;) Happy New Years!

@versace885 3 года назад

Hi Eddie, Another great video, thank you.

@KissAnalog 3 года назад

Thanks - I appreciate you!

@myelectronicsworld 3 года назад

Knew only about Spice that I used a few times say in 1988 may be:))) Thank you for introducing the name and the software. When I saw the title, I thought that was a kind of capacitor;)

@KissAnalog 3 года назад

It does sound like a capacitor or Microchip company;). Thanks fir your feedback!

@obiAlkenobi 2 года назад

Amazing Video. Big Thanks for taking to time to make them. it helps a lots !!

@KissAnalog 2 года назад

Thank you Alberto! I appreciate you!

@Dcassimatis 2 года назад

Thank you for making these tutorial.

@KissAnalog 2 года назад

You bet! Thanks for your feedback!

@FrankTricamo 3 года назад

Your tool reviews are great.....but this is better. I look forward to more of your "U" videos. I'd like to see some reverse engineered circuits disected/explained/simulated. Anything in your wheelhouse like power supplies/rf/audio. I thought Falstad was cool....never knew of Micro-cap. great tool. thank you for the videos

@KissAnalog 3 года назад

Thank you Frank - I appreciate this feedback! Happy holidays;)

@SpinStar1956 3 года назад

Hi Eddie (I believe?) I just started downloading the MicroCap SW and have yet to get into it but wanted to let you know I did fire off an email to Spectrum to let them know that I and others appreciate them putting this into the public domain. It would have been so easy for them to have just shut it all down and not been bothered; so to me it shows a love they have of their legacy product. And thank you for both letting know and making tutorials to get us going with what appears to be an impressive tool. Anyway thanks and 73...

@KissAnalog 3 года назад

Thanks for the great feedback! I appreciate you!

@robinkumar9086 3 года назад

Thanks a lot sir, I have just installed this software and I am really excited

@KissAnalog 3 года назад

That’s great - I’m glad that you got your copy! I have a playlist of tutorial videos if you are interested;)

@nicholasleewoeiming526 Год назад

I am using Microcap 12 simulator to design my analog fuzzy integrated circuit. Although this program has no match of the power of Hspice, it still meets my requirement according to my thesis. Thanks for your video of the introduction and further detail of Microcap 12.

@KissAnalog Год назад

You bet! Thank you for your feedback!

@curtislucka9954 3 года назад

Thanks for these vids - they are very helpful. I have used this tool for several projects and I love the results. Could you show us how to setup a transformer - power and audio output. I am not finding much there and not sure how to interpret component attributes that may be there on some sample transformers. Happy Holidays!

@KissAnalog 3 года назад

That's awesome! Thanks for the feedback! I appreciate you!

@7arp836 3 года назад

わかりやすかったです、ありがとうございます😊

@KissAnalog 3 года назад

ありがとうございました

@dnk4017 Год назад

great ! thank you !

@KissAnalog Год назад

Thanks so much!

@henryjeskelinen1636 3 года назад

Really nice video. Newcomer in this area.

@KissAnalog 3 года назад

Thanks - I appreciate you! And welcome! Please consider subscribing. I am running behind so I try to answer my subscribers first, then work my way through the list:)

@andymouse 2 года назад

Nice Tutorial....cheers.

@KissAnalog 2 года назад

Thanks so much! I appreciate you!

@davebuhs453 Год назад

this is very helpful for a newbie.

@KissAnalog Год назад

Thanks so much! I have a playlist with tutorial videos:)

@peetbezuidenhout2434 3 года назад

Hi Eddie, Thanks for the videos you make. I have watched many of them already and will continue watching more. I especially like the Micro-cap videos, i have downloaded the software and are using it to improve my audio amplifier knowledge. Could you perhaps make some audio amp design videos and simulate the different building blocks with Micro-Cap. This really helps with the understanding of electronics. The PSU is also another area of interest to me. I mainly have interest in analogue electronics although PIC-micro and Arduino makes things more easier to make more complicated projects. Again, thanks for sharing you're knowledge and please continue with the videos. Peet from South Africa.

@KissAnalog 3 года назад

Wow - South Africa! So cool! Thank you and yes I will. I’ve only scratched the surface;)

@aripudjowibowo8197 Год назад

Thank You Sir 🙏

@KissAnalog Год назад

Thanks so much!!

@shahafe2000 3 года назад

Thanks!

@KissAnalog 3 года назад

You bet! Thanks for the feedback;)

@charmio 3 года назад

Finally a tutorial with decent audio!

@KissAnalog 3 года назад

Thanks Charlie! Did my other tutorials have poor audio? Or, are you referring to other channels? I'm always trying to improve;) I appreciate your feedback!!

@charmio 3 года назад

@@KissAnalog I actually haven't gotten to your other videos yet - at this moment I'm still following along on with Micro-Cap on my computer - pausing while I explore what I've just learnt. You're doing a a far better job of explaining it than the 'User's Guide'. Thanks for that. It's the abundance of other electronics tutorial channels with bad audio that drives me nuts. God knows how people with such detailed electronics knowledge manage to screw up a microphone.

@zetadoop8910 3 года назад

Great Video. Could you show how to solve some practical problem like choosing the right cap and inductor for impedance matching of 450 Ohm load with 50 Ohm power source at 433Mhz or something similar real world problem with real values that we can test later with NanoVNA

@zetadoop8910 3 года назад

To make it a bit simpler there is SimSmith program. It may automatically find solution. So you will insert these values in MicroCap or LTSpice and later solder that board.

@KissAnalog 3 года назад

Thanks Zeta Doop! I can't wait:) Yes, I am going to start the fun stuff soon and try to get these out once or more a week;)

@MarcelHuguenin 3 года назад

Excellent! I am a Mac person and have been using CircuitJS1 (Falstad simulator) for quite some time (learned a lot using that) and I have a free version of LTSpice for MACOS but I liked already what you showed me with MicroCap, so I'm setting up another Windows10 for this MicroCap, so I can follow along your follow up videos better (hopefully also with some stuff on SMPS'es :-) By-the-way: have you heard of Quite Universal Circuit Simulator? This one comes in Windows and Mac version and is Open Source too.

@KissAnalog 3 года назад

I held off using Macs for this reason, but maybe 10 years ago I went all in and love my Macbooks! I use parallels program so that I can run Windows based software with no problems or slow down - it is actually amazing! I can pop back and forth on mac or windows with ease;)

@cannaroe1213 3 года назад

At 10:46 it sounds like we drop a magical resistor ✨✨

@KissAnalog 3 года назад

LOL, that's right;)

@TRONMAGNUM2099 3 года назад

This got me thinking if I can design a crossover with micro cap. A high pass around 80hz

@KissAnalog 3 года назад

You Sure can;)

@richardgray8593 3 года назад

From Hayt's Engineering Circuit Analysis textbook: When using real devices, Watch the models that you choose; Think well before you calculate, And mind your Z’s and Q’s!

@KissAnalog 3 года назад

Thank you Richard! That's a great book and quote;)

@abbas8596 2 года назад

👍👍👍

@KissAnalog 2 года назад

Thanks so much!

@johnsweda2999 3 года назад

I was wondering about using motor run capacitors say 3 50uF on the end of a isolation transformer or inverter as a battery type backup of a scenario so you get clean constant supply to your transformer amplifier a bit like a re generator. Could you use the capacitors in that way to storing some energy and keeping the mains constant?

@KissAnalog 3 года назад

I think you can use caps to filter the AC but not to store it. Unless you mean after converted to DC? Great question John!

@johnsweda2999 3 года назад

@@KissAnalog I thought motor run caps are AC? Motors like air conditioning fridges run on AC current motor run caps change the phase of the AC isn't that there job and hold current. I'm confused now maybe somebody will know

@KissAnalog 3 года назад

@@johnsweda2999 You are right - they are AC capacitors. And they do change the phase. Motors are inductive which makes the current lag behind the voltage and the caps make the current lead the voltage. Used together the hope is that the voltage and current are back in alignment for max power. Does that make sense? I think this is a great discussion for a video;)

@johnsweda2999 3 года назад

@@KissAnalog sort of yes be nice in a video still not sure if you can use them to store AC voltage and how that reacts with the transformer maybe on both ends Happy New Year

@glockpawpaw 3 года назад

Hi! I got a question. Next year I’m going to study electrical engineering and I have a MacBook Air M1 so I was wondering if Micro-Cap is available on MacBook? Is it possible to download it??

@KissAnalog 3 года назад

I use a MacBook, and all you need is the Parallels program to run windows. It is great and you can switch between OIS and windows with no problem, and they actually run better than on a PC;)

@rohitchaturvedi2271 3 года назад

How to probe current through an IC pin in probe transient. When i click on a pin, it enters in subcircuit.

@KissAnalog 3 года назад

That's the tricky part - it wants to know what you want in that grocery bag;) I'll show this sort of thing soon:) Sounds like you are doing a great job at getting around!

@gkdresden Год назад

How does MicroCap compare to LTSpice? I'd like to give it a try. Who has experience with both circuit simulators?

@KissAnalog Год назад

Great question! I can tell you that Microcap was a $4700 product right up to when the owner retired and decided to give it away. LTSpice has always been free, but many purchased Microcap anyway - as I did;) I use both and Microcap is hands down a superior product. BTW, the guy who is the father of LTSpice left the company. I wonder how long Analog Devices will keep supporting it. If you give Microcap a try - I’m confident that you will see what I mean:)

@keremtarikaygun 2 года назад

Hi.I can't find BT137 Triac on the program library.Why isnt there BT 130 series on Microcap? Or i dont know.Can you help me? Thanks.

@KissAnalog 2 года назад

Great question! I'll do a video on this very soon;)

@keremtarikaygun 2 года назад

@@KissAnalog Thank you so much.The video could be very good.

@samcast1005 Год назад

Do you know where we can download Microcaps? It looks like the site finally went down

@KissAnalog Год назад

They finally closed the website:( Try this and let me know if it works please;) groups.io/g/FreeEDA-Tools/files/MC12_Files_&_Documents/MC12-2-0-3.zip Micro-cap Tutorials playlist link: Micro-Cap ru-vid.com/group/PLZ0_iMoMBSslK1NFAXIEBsTnFzP8u9BGH

@tonysfun 3 года назад

What did you get for Christmas??? Demo DEMO asap.

@KissAnalog 3 года назад

I'll have to get back with you on that - or do you mean what I got myself;)

@tonysfun 3 года назад

@@KissAnalog Yes, yourself! I have a big list, but I should do my lab very soon for that. Merry Christmas to you and your family!

@KissAnalog 3 года назад

Thanks Tony! Merry Christmas to you and yours too;)

@paules0099 Год назад

Dude, this is just like Electronic Workbench from NI. It's also free...

@KissAnalog Год назад

Thanks for your feedback! I do like Electronic Workbench and I used to own a professional copy. It is a little different then Micro-Cap though as it is not a true SPICE machine, but it is great to use and another fun option.

@paules0099 Год назад

@@KissAnalog MicroCap doesn't let me add a variable resistor or switches that you can assign hot key to toggle on or off, not the end of the World. I'm so used to EWB, I guess...

@KissAnalog Год назад

@@paules0099 I’ll show how to do a variable resistor in a new video. I did this as part of another video but it probably needs its own video.

@winstonsmith478 3 года назад

Great stuff, but I really don't like your magnified cursor as it obscures the text label of whatever you're pointing at by only showing a magnified portion of it which is annoying for some reason.

@KissAnalog 3 года назад

Thanks Winston - I noticed that more this time editing too. I'll see if I can find a better way. I appreciate you!

@tasmedic 2 года назад

This is going to make you laugh... I had a heck of a time trying to find a potentiometer until I located it in the "macro" list. That's not very intuitive!!!

@KissAnalog 2 года назад

LOL Now I’m curious as to what else is in that ‘macro’ list;)

@luizcarlosquerido2943 3 года назад

Man...this lens s not goot to us. Don't help nothing.

@KissAnalog 3 года назад

I'm sorry, you say the lens is not good, is it out of focus? Or, do you mean that the intro video is not good? Here is a link to a playlist with other Micro-Cap videos: ru-vid.com/group/LLD5GUs2SVXDaqDo6WMtdsqw