ion lifter / ionic thruster / ion craft. 

it's seem you have two face circuit or less a transfo... but strange to work without it...

@@NansLOIGNE on the top left there are 16x 100kohm resistors glued on a white plastic in series, it's to protect the diodes in the cockcroft walten multiplier (they are max 100mA), if a unwanted short happens at the output to limit the current. .... The first stage is a dual Bost circuit that directly boosts into the cockcroft walten multiplier, haven't seen this schematic anywhere before. It was a bit of thinkering to make it, and use only lightweight, unmodified of the shelve smd components.

The thing with numbers

here is how its done : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3ISDvOFCF44.html

I am doing the same...what's your progress status so far

@@piyush_ferex umm it was yesterday and I didn't participate even though it was the last fair since the other typa model I tried didn't work and Im not confident on this concept like I didn't understand this fully and the energy supply felt too hard to search so yeah I just did some volunteer work

Plasma channel has done one

It’s called a voltage multiplier. Watch yourself if you want to use it. You can also get a high voltage capacitor and use that instead.

The interesting and genuine way is how I feed the voltage multiplier circuit. I haven't seen anyone that uses the same feeding mechanism, but I think I will open the schematic and than you can decide by yourself, and maybe even some did it this way, but I am not aware of. It's anyway hard to tell since probably nobody knows how exactly I did it without the schematic..

here is how the circuit is done : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3ISDvOFCF44.html