IoT Based Patient Health Monitoring System using ESP8266 & Arduino 

Yes bro

Pleas3 subscribe my channel for more such projects

How To Electronics yup, subscribe done :)

@@joyceyik4706 have u done this project?

@@HowtoElectronics does this code work perfectly after following the shown steps? Bcoz I tried several similar codes but it isn't working

@@hemangichauhan1235 yes its not working

Yes u can use 0.96" OLED Display if you are capable enough to modify the code.

Moi aussi j'ai le même problème

Bhai tumhara ye problem solve hua

Sir same problem coming with me please solve my problem sir.

So what you get

Use 10k pot at pin 3 of LCD to control the contrast. And also check the Pins assignment from LCD and Arduino w.r.t code mapping.

Hey, did you fix that error?

hi did u fix the error and if so pls help me out here

You can solve this error?

did u find a solution?

Change user name and password on code line no 74 To be same as your hotspots user name and password

hy share the code

@@sanyamsingla7597 dID YOU END FINDING THE CODE

​@bestteletronics6251 what should i kept?

Same problem. I am not getting the data.... Have you got?

Have you got anything

You don't need any extra libraries.

@@HowtoElectronics then I'm not getting output on LCD and thingspeak

@@shambhavipoddar397 were you able to rectify the code?

@@shambhavipoddar397 same problem to me what you can do after you have not receive a output please if you know reply to me

simply, use if the condition for it and pin status HIGH. Use buzzer at that pin.

Hey i used 3.3V from Arduino. It works only in some module of ESP8266-01. Doesn't work with every esp8266-01 module. You need an external power supply.

is it workin?data displayed on thingspeak?

hey im getting this error while running the code what should i do? ISR(TIMER2_COMPA_vect) //triggered when Timer2 counts to 124 the code isnt working on arduino online, what should i do?

@@luqman2871 sir can you please tell me what is the complier he have used

Same problem

Amazon you can

Add some delay of almost 100-500ms between all the AT commands, it will work

@@HowtoElectronics how sir can u send a updated full code thats bettter for understand

Did it work?

@@shreyamanjucha4621 I have the same problem the data not display in thinkSpeak

Any board will work

Mam can you please tell me what is the complier he have used please

Mam please help me

Have you got anything

Met too did you find the soultion?

Jared Rodriguez did You find any solution for this??

have you cleared that error

It will cost you lesser than 1000.

brother have you finished this project?

Worked?

Have you change user name and password for you're hotspots

@@bestteletronics6251 where we must changed?

No any other field apart from all this 3.

@@HowtoElectronics Sir, I have tried everything but there is display problem on lcd and even thingspeak is not showing the plot. Only serial monitor is showing the data. Can you please help me out with it

@@mrinaltyagi1697 did you find the solution?

Yes please

Did you get the cruit connection

Yes

install some important libraries in your software

Same problem

Hey are u solved ur problem iam also getting same problem can you please explain if u solved

Nodemcu program is already given. You need to upload the code directly via usb after compilation

@@HowtoElectronics dear sir in this tutorial only Arduino program is given but u use esp8266 also what about the esp8266 program. Which is not given in the description.

Just upload the arduino code to arduino board. Arduino is connected to esp8266 via tx and rx pins. The code will communicate between esp8266 and arduino via tx and rx pins.

@@HowtoElectronics thanks sir

drive.google.com/file/d/1tmWPUbg_RAzrquJCmfDkwJSrkmMN97ck/view?usp=sharing try this. It worked for me

@@sushantrimal3080 TNX ....same circuit connection?

@@sushantrimal3080 did you download ESP package?

This code worked for me Thanks brother

@@vaishnaviingale8623 hey, i am making the same project but i am not getting any data on thingspeak.. Can u pls help me..

yes

Did you get it?

Its working

Remove connection for tx and rx pins from Arduino before uploading. Once uploading is done connect again.

@@HowtoElectronics Arduino: 1.8.7 (Windows 10), Board: "Arduino/Genuino Uno" Sketch uses 930 bytes (2%) of program storage space. Maximum is 32256 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes. avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x0a avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x52 avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x65 avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x71 avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x75 avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x65 avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x73 avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x74 avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x69 avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x6e An error occurred while uploading the sketch This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences. i got this error i dont have any connections iam checking blinking program bt i got this error while uploading

Upload from other pc. Sometimes nodemcu boards data get corrupted and this happens. Or may be your esp8266 is damaged.

Library link is already added. Check link and visit website

How did you solve the lcd problem?

@@sushantrimal3080 HOW DID YOU FINISH THIS PROJECT.

Yes u can. Need a code modification

@@HowtoElectronics for code pls help me

@@shubhtech1260 this is also question of mine