Hi Surin. I have an iPhone 5S that charges only if it is on. When it is turned off it does not attract current nor can it switch back to recovery mode. you have ideas?
hello sir i got an iphone SE that wont charge after water damaged! iv removed the shields and cleaned with the unltrasonic machine ! the little resistors next to the battery connector seems gone! should i get these resistors? or replace the u2 is enough? hope you can help me!
thank you for your answer! iv noticed that the brown color of the board is gone because of the rust !! even so the iphone will work again if install the resistors?
thank you for the answer!!! ,do you know the name of the resistors?? iv noticed that the brown skin of the board is a little bit gone next to the missing resistors! it will give me problem after i install the new resistors?
10X for fast-reply ... could you tell me please, how durable is this U2 Chip replacement. I have a 5S which it seems to have the same problem, it's charging only with 500mA at 4.14V and only with some cables. For example with original apple cables woun't charge at all, only with some replicas...and allso drains very fast, doing nothing drains about 7-8% /hour only with 3/4G active. Do you think is only that chip that is causing this problems? (Excuse my english if i made some mistakes)
4.14 its not ok, check your cables or power adapter. Be sure your usb power meter show you 4.8V-5.2v, also be sure you have a genuine apple plug power adapter.The 500mA can be a result of 4.14 v