iPhone XS -12 Pro Max Important Battery Message Pop-ups Removing - 100% Fixed

Подписаться 802 тыс.

Просмотров 419 тыс.

50% 1

Apple has encrypted the battery of iPhone XS and models above. Once you replace the battery, you will get the “Important Battery Message” and “Service” message. Especially the battery data of iPhone 11 series and iPhone 12 series still can’t be accessed. To solve the problem, REWA LAB has verified the latest solution. Today we will share solutions concerning iPhone XS series, iPhone 11 series and iPhone 12 series.
For more details, please visit our blog: blog.rewa.tech/detail/iphone-...
Products recommended in this video:
Qianli Copy POWER Battery Data Corrector: bit.ly/3hwnXg4
Spot Welder: bit.ly/3CssM3A
iPhone Battery Cell Replacement (XR-11 Pro Max): bit.ly/3jCS1t1
Qianli iCopy 2.1 Repair Programmer: bit.ly/2Trtqg8
Qianli Power Cable(For iPhone 6-11 Pro Max): bit.ly/3AnQeOI
Battery Replacement: bit.ly/3jB7PfT
iPhone Motherboard Repair Training Book (REWA Exclusive): bit.ly/2MJmPKy
For more discounts, you can contact our wholesale team: shop.rewa.tech/wholesale.html
Any questions and demands please feel free to contact us at: sales@rewa.tech
Subscribe us for more latest information.
-----------------------------------------------------------------------------------------
Official Website: www.rewa.tech/
Blog: blog.rewa.tech/
Facebook: / rewatechnology
Instagram: / rewatechnology
-----------------------------------------------------------------------------------------

Наука

Опубликовано:

1 июл 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 284

@rewatechnology2008 2 года назад

If you have some repair topics that you are interested in or suggestions for us, please leave your comments here. Products recommended in this video: Qianli Copy POWER Battery Data Corrector: bit.ly/3hwnXg4 iPhone Battery Cell Replacement (XR-11 Pro Max): bit.ly/3jCS1t1

@sssloe 2 года назад

M1 Mac (air, pro, mini) NAND upgrade ❤

@parimanjamaibam8551 2 года назад

Please make a videos for replacement of Iphone 11 pro battery on iphone Xs max for more battery mah

@jibbaowndsu 2 года назад

How to properly solder touch ic iphone 11 How to use the next Qianli copy power inner flex (no repair traces) site says you need jumpers? Thanks Rewa preciate you guys very much!

@Chinaavtocar 2 года назад

This method have a problem, due to the SOC base coulomb method, this way can not change the chemical ID,which cause the battery bms still work in old heath way too even changed it to 100% as vedio show,please test the new battery standby time to check it.

@shakeel19781978 2 года назад

how to use the Qianli battery copy power for iphone xs? i did, even upgrade the box but doesn't fix the battery message error

@rdp8545 2 года назад

Well done REWA! Can't wait to get enough money together to purchase these items. You're doing a wonderful job for the iPhone right to repair community.

@roseelectronics4582 2 года назад

Great breakthrough! Thanks REWA

@Travellingdude2603 2 года назад

Great work REWA. 👍

@sssloe 2 года назад

Awesome work as always

@toolplusqianli9219 2 года назад

Thanks for sharing this with fans and we will keep moving forward.

@ahmedalnajjar1288 2 года назад

Can you help us to download this program ? We can not get this interface in our program.

@iphonerepairapeldoorn3524 2 года назад

Rewa, you guys are awesome! Successfully transferred the BMS from an iPhone XR today!

@henriksvensson2836 4 месяца назад

Nice, did you need tag on flex?

@techindia2763 2 года назад

thanks for the video, very informative.

@nilomyki 2 года назад

Thanks again REWA Technology.

@SukronHidayatullah 2 года назад

Great video ! 👌🏻

@doubledown9 2 года назад

Jeeze Louise, great job! I’m used to replacing my 1st gen SE battery. It’s so easy but I’ll be getting the 12 mini soon. I’m willing to pay the £70 for a new battery when the time comes lol. They are dirty bastards for not allowing people to repair easily. Should be illegal!

@jackswain9492 2 года назад

It will be illegal soon due to right to repair laws and the environment

@nilomyki 2 года назад

'Dirty bastards' and 'illegal,' you said, keep calm and enjoy the wonderful companies like REWA is doing, as you clearly don't know what you're harking about. This repair is easy for a "skilled" technician, but definitely out of the ballpark for the average joe. Professional Shops have to have the right equipment the repair, quality {third-party} parts, microscopy for inspection (as you won't believe the damage that can be cause to the FPC's and surrounding discrete components), so the upfront cost is very high - a professional shop has to buy in quantity to be profitable.

@jackswain9492 2 года назад

@@nilomyki wtf are you on about, they are talking about the important messages you get when they are unnecessary and can only be removed by APPLE technicians or apple approved service providers

@vhcell4534 2 года назад

Muito bom o vídeo, saudações do 🇧🇷🇧🇷🇧🇷🇧🇷👏👏👏

@madushanweragama6702 2 года назад

Thanks thanks thanks thanks rewa super super max rewa...

@irvinglara5730 2 года назад

Luego de hacer el proceso dejas el flex que colocaste ? O lo quitas y queda funcionando normal ?

@piecetoyou8285 Год назад

Hi .Great stuff thank you, Please` where to buy or how to make that power cable for phone you use for inside the phone as you show

@arizkyhelmi 2 года назад

THANK YOU SO MUCH!

@JohnBoonBeanDutchman 2 года назад

even if your screen is broken and replaced with an original screen, it seems that everything you want to replace has a serial number and can't just be replaced

@VishnuVlogger865 2 года назад

Congratulated Rewatechnology🥰🥰👏👍🍎🍎

@thatthomasguy1319 2 года назад

I bought your V11 device and I've tried emailing to get some help with the "IIC chip not recognized!" error when using the software. It's been two weeks. Why is it so hard to reach anyone from your company??? I'm a new customer and the complete lack of any help is incredibly concerning.

@yosamitesam6103 2 года назад

maybe it's a scam

@krantikoganti 2 года назад

@@yosamitesam6103 Rewa is a reputed company. Bought many items. I'm a phone repairer.

@yosamitesam6103 2 года назад

@@krantikoganti hey do you have any recommendations for a good screen replacement source for like android phones like for galaxy a30 i have an a30 screen damaged carried it to repair and the screen was bulky the touch responds poorly and it stopped working do you know if they have the original screens for replacement or at least real oled screens other than the LCD screens?

@GsmTips 2 года назад

Great stuff!

@Anonymous_-qm5rr 2 года назад

Apple watching this be like 🤔

@tochitech7145 2 года назад

😂😂

@ashirounimya612 Год назад

Hahaha apple say wow

@darkx4397 Год назад

Man fuck apple i need ma phone fix

@tugas4121 2 года назад

Thanks rewa.but still need original BMS. Can solve without it? Copy data from iphone?

@eliasboumra8717 2 года назад

Hello , I want to know where i can buy the protection tape with the adhesive tape ... I don't find this . Have you this in your webshop?

@YousefNofal 2 года назад

Rewa has always the right solutions thanks for sharing this. Please make a video how to upgrade nand on iphone 11 pro.

@kennymartins4542 2 года назад

Nobody does it like FixUnlock on Twitter, they are the best

@th3realani 2 года назад

AWESOME REWA

@adriananzano2292 2 года назад

thank you rewa

@Dudlin1368 2 года назад

Hi, i have question, what about iPhone SE 2020. do you need tag on flex, or you can just replace BMS board. When you replacing battery

@just_in_key 2 года назад

Apple works hard but rewa works harder

@ashirounimya612 Год назад

Wow the best technician

@TheKapiet 2 года назад

Ok, this looks cool but can you get rid of that message od you dont have orginal BMS?

@toseefirepair8684 2 года назад

That pcb board for reading data we have to remove after reading and save?or we have to keep connect with battery include that board?

2 года назад

Did you get any answer? This is my question too…

@olanrewajudavies6936 2 года назад

Thanks for the info, I order 11promax new board to change my faulty board but after the installation it bring wrong battery message. In that case what will I do since the battery is still original

@ddudez2359 2 года назад

After you reset the battery efficiency back to 100%, does it still drop as it normally would? Like would it always stay at 100%, or will It lower as the battery degrades over time?

@msfilho 2 года назад

Original BMS should work normal.

@speedycerviche3653 2 года назад

Ladies and gentlemen we did it 🙌🏿👏🏿

@gastech3272 2 года назад

Hola muy buenos los vídeos me gustaría saber si también envían sus productos a Perú? seguiré atento a sus videos

@rewatechnology2008 2 года назад

Gracias! si, puede enviar a peru.

@gastech3272 2 года назад

@@rewatechnology2008 yo entre a la tienda seleccióne un producto y me salió a tu país no está disponible 😞

@kaisha4355 2 года назад

Do we get 3600mAh 100% full capacity after we recalibrate from QuanLi battery tool software?

@saudiarabia7713 2 года назад

Rewa greet teacher

@andywharton5120 2 года назад

Hi, great video! Every time I spot weld the anode and cathode to the bms it pops and burns out some of the batteries nickel cathode? Do you know why this is happening and how I can get around it?

@rickwesteinde6629 Год назад

I had this happen too, please try and exercise on old batteries an make sure to really push so that theres no space between the motherboard and the cathode/anode of the battery cell.

@rightsoon4836 2 года назад

Hy Rewa Pls help me decide if my phone is safe because a repairman who replace my iPhone 11 battery used liquid gel super glue instead of the adhesive tape pls will this damage my iPhone or battery this was applied on the battery compartment before placing the actual battery on top of it

@rahulkhilare-ze9mu 7 месяцев назад

Superb

@travisfrost6508 2 года назад

at least it's not too hard, thanks!!

@stevenwilmot3220 Год назад

Activate the battery by direct current supply, could you talk us through that? What parts of the connector are the probes on as im getting no response from it when I put the probes on

@jtechberry611 2 года назад

So does it work for 12 now or not yet and if I want to purchase and get it here in Nigeria what will be the total price please?

@bogdanpodolyak3952 2 года назад

what kind of program in which you can change the number of cycles?

@tetaizozadja7080 Год назад

is it possible to use icopy plus 2.1 reprogramer for this job?

@alphajuaan 2 года назад

where can i buy good aftermarket battery?

@andreagiammaria122 2 года назад

Good morning, I have a problem with iPhone 11 and especially with battery error. Firmware installed 15.3. Swapped battery connector. When connected to the iPhone still shows the error battery. I tried also with the external flat and still shows error. The problem is the firmware 15.3 or I made a procedural error? Thanks for reply

@jamile11mariano 2 года назад

Do you have by any chance any repair shop here in the Philippines that uses this?

@appletech1565 2 года назад

Is that copy power support face id or true tone?

@a.krause790 2 года назад

Do I also need the pcb board for the iphone se 2020? Or is it enough if I spot weld the original battery board onto the replacement battery?

@jhonkevinsotocruzado4570 2 года назад

no es necesario, solo necesitas la copy power 2.1 para poder modificar la condicion y los ciclos de la bateria

@greyluk 2 года назад

Are both, the iCopy Programmer and the PCB-board required to read&rewrite iPhone 11 series cycle count/health or can u also use the newest module of the JC V1S ?

@emmy020891 2 года назад

Is this repair possible without knowledge of soldering?

@ankitsagar9510 2 года назад

Nice

@scubador 2 года назад

What is the voltage setting in the power supply to power the xs max to power on?

@davidpieczynski8019 Год назад

Will you accept phones to fix this issue? I had 2 iPhone XS Max batteries replaced and have this problem. Thank you

@rewatechnology2008 Год назад

Sorry, we currently don’t take personal repairs.

@kenni978 2 года назад

Is there any solution for SE 2020 battery cycle / eff. reset?

@mtvaai9363 2 года назад

Sir can you tell me➡️ it can be 100% battery health ? after if i replace new copy battery to the i phone xs max

@profsmartphonerepair8808 2 года назад

is there a special class for battery pop up material?

@mohammadfuadhamam4099 2 года назад

Great

@gandolfoamico9913 2 года назад

the flex add cable must be definively into iphone?

@user-bu5bj1mc9z 2 года назад

I've changed the motherboard for an i11 and this message appears with another one saying screen is not original. All components are original. How can I delete those messages?

@techwithA 9 месяцев назад

We have to keep tagon flex there in the phone?

@bogdanpodolyak3952 2 года назад

relevant with the release of ios 15?

@anne4524 2 года назад

Maybe you can also find a way how to install Ios 15 on Iphone 6plus. Many would love to know about it.

@shreevishavkarmamobile8913 2 года назад

Thanku

@imcoolboy524 2 года назад

Good

@PEREGRINO45 2 года назад

Tienen alguna tienda en AliExpress?

@Mateus-ki1oo 2 года назад

os mais brabo aí

@calogerocastronovo9851 Год назад

I can use i copy plus 2.2 with flex cable? Instead of copy power??

@b.l.v.c.k__ Год назад

☝️👆👆👆

@b.l.v.c.k__ Год назад

For help ☝️👆👆

@ciloyofficial1515 2 года назад

can i use icopy plus + special pcb board to read battery data for ip 11 on pc?

@calogerocastronovo9851 Год назад

Same question

@syednayeem3086 2 года назад

Can we recalibrate the original battery without changing cell, using programmer ?

@zedzed3124 Год назад

Can someone help pls, can I use the qianli icopy plus 2nd generation to program the iPhone 11 and above models instead of using the qianli copy power, very much appreciated

@kianward5999 2 года назад

great work you guys are amazing screw apple for being so dirty with ther sneaky dirty tricks great channel guys love it

@yoho2chn 2 года назад

to sum up: iP11/12 needs extra fake bms id board to make new cell work?

@ThePawciohd 2 года назад

yes.. so if u want to replace battery in series 11 you need to buy batteries and tag.. not good.

@ifixsmartphone9079 2 года назад

This is great tutorial. but it gets me to think, what is reasonable charge to customer after doing all this to sell aftermarket battery? I guess this would be great for iPhone users who are far from Apple Store or AASP or IRP and have access to local repair shop.

@Francesca456 2 года назад

40€

@blackstars1989 2 года назад

@@Francesca456 ahahahaha going through all that for 40 € no way! A aftermarket iPhone x, not even talking about xs or 11, 12. Is already 18€ or slightly more. Then taking the time to program it, spot weld it, protective tape on it again. No way! 75€ seems like a legit price . Where I live the local repair shops don't even touch it because of the pop up message. So it's either get a professional technician to do it. Or go the apple care a god knows how much they will charge you to pay. Last time I checked a i11 LCD at apple care is 230€ but a proper aftermarket Incell screen is 53€. And you can restore true Tone on that one 15/20 min and job is done

@blackstars1989 2 года назад

@@Francesca456 just looked it up 11 is 35€ to buy so 75 is the minimal I would ask

@Francesca456 2 года назад

@@blackstars1989 usually i pay batteries 15/20€ i still not have checked

@migru9988 2 года назад

apple made battery replacement cheaper is like 75€ for a new battery..

@johangamio5053 2 года назад

Do you have solution to important message camera iphone 12 pro max?

@ahmadhaqqif8002 Год назад

can do this without old or original battery ?

@MaxianRaduIoan 2 года назад

hi! how to remove the important battery message from my iphone xr? any solution?

@jawanzalmi1324 Год назад

The health percentage will be decreased fast or not?

@VincenzoAvallone 2 года назад

all this hacks and workarounds just to fix a stupid battery! we need a right to repair law now!

@dominikbarteczka4896 2 года назад

Hey , any ideas why my iphone xs still is showing old battery eficiency? I removed original battery , resoldered fled to new battery , then reprogrammed to 0 cyclecount and 100% but after boot it still shows 86% instead of 100%. (3utools reports 100% efficiency correctly)

@simeonidisnikolaosgamer844 2 года назад

Install nin genuine battery first then install the fixed one

@asfarmasood1009 2 года назад

Hi i have iphone xs and i replace its battery from market now its showing battery message i ask the shopkeeper for the old battery he said he dump that. please tell me ho to solve this one and iphone store said that you have replace the battery from market so we cant help you …

@huhyunjinily 2 года назад

will updating the phone instead help?

@simeonrogers5915 2 года назад

Rights to repair, after all I did purchase the phone so I own it😌

@dominicinalegwu 2 года назад

I'm not sure markhack7o7 on instagram knows he has so many people recommending him here but that's what you get for doing a good job.

@marccosso5299 2 года назад

Can i te place IPhone 11 and 12 bateries with icopy plus?

@Travellingdude2603 2 года назад

Can you bring solution for screens please?

@muzafferkarabulut9013 2 года назад

No need Ander LCDs called iTruColor came without display message

@JUANMITA151 2 года назад

hola hacen envios a colombia?

@lindonberishaj8096 Год назад

I newer left pcb flex inside, why are you doing that?

@techknewz 2 года назад

U have to remove original flex can’t do it with the flex that come with battery?

@rizqijune 2 года назад

need to copy the serial number of the original one

@nicolexue0302 2 года назад

ive done mine but it still.has a message saying that recalibration. what does that means

@abahgadget9742 2 года назад

1 fpc cable for 1 batery? Or 1 fpc cable for many batery?

@muzafferkarabulut9013 2 года назад

Same question

@15nathanjenkins 2 года назад

I attempted this repair and the spot welder was making the nickel sheet break… tried 2 batteries and gave up - any tips please?

@UserUser-ww2nj 2 года назад

sounds like your spot welder was to powerful , mabe get a power supply that you can adjust and see if that works

@bencepuski7447 2 года назад

The same here, any ideas Rewa?

@victorandrade1041 2 года назад

Tente usar uma potência menor na sua maquina de solda ponto, acredito que isso irá te ajudar, abraços

@calogerocastronovo9851 Год назад

This because the probe are too close to each other, try with more space between

@Ari-hh4bw 2 года назад

How about iphone se 2020? Message still appear as well?

@farahefifi601 2 года назад

Peace, when you click on the iPhone screen and the colors appear like a rainbow, does it mean that it has already been opened and nothing appears when you press? , does that mean it does not open

@zevman0518 2 года назад

Will we need to restore iPhone if battery efficiency is below 50%

@spyropyro3159 Год назад

Will this also work when changing cameras?

@n_h8904 Год назад

Yes, but Camera warning message just comes up on the 12 Series and higher. And for the camera message you need another board to connect with the qianli tool

@MrPranayprince 2 года назад

make A VIDEO ON double decker cpu reballing process

@rafaelmafra 2 года назад

Is there any software solution to remove battery warning message to iPhone XR?

@rewatechnology2008 2 года назад

iPhone XR has the same solution as XS.

@rafaelmafra 2 года назад

@@rewatechnology2008 As far I know, only changing the logic board from original battery, am I right? I wish to take that annoying message with something that doesn’t need soldering skills. Is it exist?

@roseelectronics4582 2 года назад

@@rafaelmafra not yet as it seems