Always leave iron bias on 0...and no discrimination at all. Instead u want to adjust the tones so all iron is low and dark so you can just hear them in the background without it getting annoying. The vid numbers you are interested in..have them come up as a high pitch tone with a higher volume. Easy as that and you'll never miss anything. And youll hear that dark, low iron tone together with the chirpy if you're above a target that the detector thinks might be good but its getting a false reading. You'll hear that straight away. If you have iron bias on or discriminate iron you cant hear that the detector trying to tell you that there are iron there as well.
An iron bias setting at one or two with a 6 inch coil for separating coin from trash. The 6 inch coil alone will make a huge difference! Yes you will lose depth but only two to three inches;)
Enjoyable video . On one of your early video's you used Iron bias 2 . Which i use . And i find a lot a tiny items . Like a impacted 0,22 bullet at a good 6 inch . Keep the tuitional video's coming . cheers for sharing your settings .
Good vid, but I’d also like to see you set it at 2 and try it again as the other comment suggested. Thanks for sharing the info as we wait to get our hands on our Nox.
I saw a video... when detecting, checking if a bottlecap before digging. go from multi to 5. This will show if it is a bottlecap.. (maybe)...depends on how old or beat up the bottlecap is. I have not tried this yet. Thanks
From the sound of your machine I think you could turn the recovery speed up one notch and you would be picking out that 1st one out to there isnt much hope getting that last one by the big iron. As far as I know. Nice vid thanks for sharing
Morning Buddy, before we went on Vacation we went to Cold harbor relices to buy a set of Gray ghost head phones an was told by Jerry that there is a much better pair of water proof head phones out there they ate made by Patriot headphones an are made just for rhe Minelab. So we bought them they were around 170 ish an they worked great.
My nox 800 won’t go any lower than 6 inches with a hammered in an air test. I’m using beach one setting with a recovery speed of 4. Is that normal or is it a bad depth
I have the iron bias is at 3, still picks up some trash, but the sounds are broken, so you know not to dig. Whit the iron bias at 3 it still finds the penny's, dimes and quarter's, but the nickles are kind of tricky, they show a 13, and so do the older bottle caps.
I don't really see a big difference in this detector than others. It's still the same battle....iron! Maybei don't know enough about it yet but still works like most detectors. Prove me wrong?
Hi Gigi , While I am waiting for my Equinox 800 I look at your videos where I learn a lot from , I have a question I live at the Beach in Belgium . What are the best settings for the beach , 2 tones or 5 tones , the best recovery speed , auto tracking on or off . Can you give me a few instructions please . Greeting Janusz from Belgium
nice video thanks ...but to be honest I could not hardly understand a thing you were saying at times when you were talking as the beeps were twice as loud as your voice was would have been better for you to lower the volume of the beeps ...apart from that mate ...great vodeo as always ...love you videos very much great work ...
I was watching a guy detect a hurricane fence line using an AT Max, he was able to move along the metal fence and pick out good targets. Do you know a way to set up the Nox to do that? Maybe need to fool with the frequency?
After storm you need look for density...foil on one way and silver gold and coins on other site... When you find the silver you are on the way. All numbers after 0 you must dig
What do you prefer when hunting relics in a field with alot of iron? Field 1 or 2? I was hunting a plowed field that was early 1800s..its infested with iron. Drove me crazy hearing all the iron. Square nails were coming in around 15 and 16. Any settings you would recommend to silence alot of the iron?
Gigmaster sorry but the impression I had was that when the Iron Bias was on you could not detect the coin that was next to the nail. You could hear it only when your I.B was 0. Correct?
Hello Steve just got back from Lake Ronkonkoma on long island,For the first time Steve i tried Fe 9 and it still picks up trash why i still hear sounds.On your video on your iron bias Fe9 i hear no sounds.Can you please tell me what else to do.And i have the mx7 it has relics program on it what do i use for relic hunting on the nox 800 please help i know you would help.
Good video . What would happen if you use low reactivity and high iron bias ? I do beaches that are full of iron nails and some good targets between . I dont want to lose too much depth but need to get between the nails better .
seems to be that with this digital processing the size of the iron in very important--it's like a mathmatical subtraction. I did a video showing how the F2 hit a gold ring right though two crossed spikes--but when you increase the size--no way.
Alberto Suarez Working on that myself! There is always a give and take for example as you lower the discrimination you lower the depth. Maybe some others on here can give us some good settings!
In this test I did not run on all metal. In this video the guy has some good setting at the end (thanks Hedge Hopper!) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zND_b_ztR8I.html
Field made 2, Iron bias 3, with reactivity 4 and ground balance at 0 (don't ground balance). This video will help you big time ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zND_b_ztR8I.html GL&HH Michael
