Ironman 4x4 Foam Cell Pro Lift Kit Install on a 3rd Gen Tundra. 2022 Toyota Tundra TRD Pro.

Подписаться 18 тыс.

Просмотров 1,5 тыс.

50% 1

How to install the 2.5" Foam Cell Pro suspension from Ironman 4x4 on a 3rd Gen Tundra, with initial thoughts at the end of the video! This kit is super smooth as far as ride quality goes. Also gives you that extra height and articulation for your off-roading adventures!
Foam Cell Pro Lift Kit- ironman4x4america.com/suspens...
Channel Partners/Discount Codes
xtrusion-overland.com/ Code- NitroZ18
LASFIT lddy.no/qnhl Code- JUDGE10
ESP Truck Accessories- www.esptruck.com/NITROZ18FISHING
Discount Code- NitroZ18Fishing
carlinkitcarplay.com Code- Z18
carpuride.com/?ref=Z18 Code- Z18
screenprotech.com/NitroZ18Fis... Code- Z18
www.tufskinz.com/ Code- Nitro10
cupgrip.com/?ref=Z18
Ultimate9 Throttle Controller- bit.ly/NZ18-evcX Code- NITROZ18
www.setpowerusa.com/ Code- NitroZ18Fishing
Cobra RAD 700i Radar Detector- shrsl.com/4g29d
blackbeardfire.com/IFISH2248 Code- IFISH2248
www.YOLOtek.com/?rfsn=2358729... Code- NitroZ18
billettiedowns.com/ Code- NitroZ18
www.shinearmor.com/ Code- Judge20
versatrax.com/ Code- NitroZ18Fishing
coverado.com/?ref=JUDGE10 Code- JUDGE10

Опубликовано:

30 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 19

@Buy_YT_Views.129 29 дней назад

This is the content dreams are made of.

@NitroZ18Fishing 27 дней назад

Thank you, much appreciated!!

@boneskull4207 29 дней назад

I have the 3.5 ironman on my 2018 tundra and so far I am happy with it, ride is smooth, took most of the lean out from cornering. I wish i could have got the green springs on my kit but it was only offered in black. Oh well. Thanks for sharing! Be safe and be blessed!

@NitroZ18Fishing 27 дней назад

Thanks man, you too! And totally agree, I’m 💯 satisfied with the ride quality and extension. Performed extremely well when I took it up the local mountain to one of my favorite spots!

@TIGWeldingCreations1 Месяц назад

Does it also give you a lift ? Or just better overall ride quality for off roading ?

@NitroZ18Fishing 29 дней назад

Yes sir, 2.5” lift depending on what options ya go with. That’s what I’m running but you can select other options as well. Highly recommend it!

@WandererProjects Месяц назад

Looks good. I've been checking on this set but the black springs are still not available. What makes you choose Ironman over dobinsons?

@NitroZ18Fishing 29 дней назад

Thank you! After doing a ton of research, I love the idea of the Foam Cell interior components and the lower maintenance required in the long run. There’s an excellent video on RU-vid from another channel that explains the differences and advantages extremely well, if I can find it I’ll link it here for ya, but he does a great job of explaining in detail the science behind the “foam cell” interior components. And I have to say, I’ve already had it up in the mountains at one of my favorite spots, and it handles like a dream! Hope that helps, thanks for watching!

@WandererProjects 29 дней назад

@@NitroZ18Fishing Nice! Did you have any issues with alignment? I'm reading that anything more than 2 inches of lift will need upper control arms.

@NitroZ18Fishing 27 дней назад

None at all, my local shop actually said it aligned perfectly. They had me in and out in less than an hour. I consider new UCA’s but glad I didn’t worry about it!

@Loucanton Месяц назад

In regards to the rear coil springs, is it required to use the old or OEM insulator to the new springs? also what is the front and rear height after the new suspension install? Thank you!

@NitroZ18Fishing 29 дней назад

Hey Lou! Ironman recommends using the OEM piece with the new springs, not sure I can say it’s absolutely required but I would definitely swap it over. As far as height, that’s one thing I forgot to show in the video 🤦‍♂️. From center of hub to bottom of fender flare is as follows… Front- 23 1/2 Rear- 24 1/2 Just keep in mind your results may vary due to all the weight I have on my setup, and what options ya choose to go with (there are different weight rated front and rear springs). If I didn’t have all that weight I would be sitting even higher, but it’s very impressive how the rear springs especially are handling the added accessories!

@Loucanton 29 дней назад

@@NitroZ18Fishing Thank you for your prompt response... I have my TRD pro rear coil springs replaced with 2 in. Dobinsons and I have to replaced the rear brake lines and add a Bolt on Trackbar Correction kit from Dr KDSS to balance and prevent the brake line strain.

@NitroZ18Fishing 27 дней назад

No prob, happy to help! I looked at their BOTCK kit, but haven’t noticed a need for it yet with my setup. Gonna keep an eye on my lines but I’ve had the suspension basically fully extended already and they looked ok, thankfully. Only other thing I am gonna do is get cradles for my bags

@caninphx 29 дней назад

I’d like a more thorough review on the shocks when you get a chance to actually put them To use.

@NitroZ18Fishing 29 дней назад

Stay tuned! I’ve already had it up the mountain at one of my favorite spots, handles like a dream. The articulation is definitely improved, I’ll do a follow up after a few more trips out, but so far I’m super impressed! Thanks for watching!

@seamuspdolan 29 дней назад

Need to extend the brake lines?

@NitroZ18Fishing 27 дней назад

No sir, brake lines are still good to go!

@seamuspdolan 26 дней назад

@@NitroZ18Fishing is that because the TRD Pro perhaps already has longer brake lines than a regular Tundra? Likely going to pull the trigger on this setup and have a Limited TRD-Off Road