IRS Wants More Money | How To Keep It | THE HANDYMAN | 

Im done paying these crooked politicians taxes. Tired of seeing our tax dollars go to Ukraine and other countries

Great content, Handyman. As always, I appreciate the knowledge nuggets you drop.

Great Video… Perfect way to explain the whole situation us Handyman go through 🙏🏽💯… props from Oakland California

Very much all true Handyman. Thanks for the content, and keeping us self employed in “the know”

Love my mini split in my garage, it's the most comfortable room in my house now lol. Matter of fact, that's how I found your channel, looking for install videos. You can get high efficiency heat pumps now also for standard split ducted setups, which I'm going to do now. Maybe not as good as multiple fan coil ductless units, but still way more efficient and comfortable than the old furnace/ac. These new low ambient heat pumps are impressive!

I always appreciate your candor and interesting topics HM. Like you, I look for ways to avoid paying more taxes than required, so a good accountant goes a long ways. One suggestion that I learned from a high level tax accountant was to expense tools that are above the 'legal threshold' for putting them into the expense category. In other words, don't capitalize something if it can get stuffed into the expense column. For example, let's say I buy a new table saw for $2000 and the upper threshold for expensing tools is $1000. Save your receipt just as you normally do so that all of your paper work is in order. If you get audited, the IRS may disallow the expense, but you won't be fined. However, there may be an interest penalty and of course you would have to pay the taxes if it was properly put in the capitalization column. This is called tax avoidance, but not tax evasion (which is the big no-no). Check with your accountant to get an opinion on this before trying it.

The dog is shaking his head in agreement with what you are saying about taxes!

Lots of good information man. Im too poor to fix my frig LED. might buy a Walmart frig motion light.

They make 'ducted' versions of the minisplits. Basically, the guts of the wall-hung units in a metal housing. They are typically about 30-40"W x 24" long, but less than a foot high. I installed one in my attic with 3 flex-duct runs to the upstairs bedrooms and a hallway return. Works awesome; all the efficiency and low-temp performance of the minis, with an easy to conceal 'air handler' for some short duct runs. If you have high ceilings and some drywall skills, you can build a soffit or get creative with a nearby closet to hide the bulk of the unit. Americans haven't quite accepted the look of the wall-hung units like most other countries have, so it's nice to hide away the 'ugly', and the ability to duct some ceiling registers to better distribute the air is great. No NatGas in my neck of the woods, and my heat pumps (including minis) are a heck of a lot cheaper than oil or propane.

Bro! I’ve been away for a bit. Come back and no beard! Totally different look! LOL! Thanks for sharing! Good info!

Thanks Handy, only comment is to say get a CPA! His rate for me was just a few bucks more than Turbo Tax and he’s always available for that quick question on how to get a deduction.

It’s very difficult year by year and it takes years to clear up their errors. Peace ☮️.Thank you for your videos.

hello from new york. i watched a lot of your videos but in this video i noticed a very funny thing. your dog is constantly looking at who you are talking to. and she is really worried about whether you are really okay or not. with your head or not. because her eyes turn towards the camera all the time in a very funny way. 🙂

You could convert your gas furnace to a heat pump system and thus still utilize your central air

Heat pumps are designed for colder climates that will work for your HVAC system..Thank You & Keep up the good work!

😂 The mechanic bent you over like you do the customers

If you want to learn how to heat a house with a single mini split unit, you need to get on Matt risinger's build show channel and look at their hyper efficient houses they have built. When you build them tight enough and insulate them really well and super control the air flow, then you are able to heat with minimal excessive outside energy. It's called building for passive house

There are plenty of multi zone ductless mini split systems available. Daikin & Mitsubishi are the best with the inverter compressor. At lower temps, NG wins, But Daikin ductless provides plenty of heat down to 5* outside. Heat pumps struggle at lower temps, if the defrost cycle doesn't keep up.

Yeah you have a separate mini split in each area, and you only heat the part of the house that you are in at any one point. It works decently well until it gets real cold and the efficiency plummets.

Camera crew. Ha! Good stuff as always.

She looks like my old dog K-sea, man I miss her! Thanks for the vids, I'm a contractor myself, but I learn a lot watching your vids!

We're building townhomes that are on mini splits. The heads will go in the main spaces and then the engineers call out transfer fans to move the air into the bedrooms.

ALL TRUE. You MUST make your money work for YOU. Real estate is a great avenue.

Yes it is possible. I have a friend who has a 4K square foot house and he uses to mini-splits with multiple heads.

Yep, I'm that Master Electrician working for myself. Living paycheck to paycheck. Lol 🤦🏼‍♂️ Thank You for this information.

Hi Pali!!!! Nice to see her again. Taxes are the worst Handy. In the mini-split, there’s a guy who lives not far from me who replaced his whole AC system with a series of mini splits. Not sure what the cost was or how efficient it is compared to a standard central HVAC, but I know they’re becoming more popular both in residential and commercial settings.

Handyman! I’m looking into joining the business industry of General Contracting. I’m currently a Marine and will be retiring from that in a couple years. I have ton of personal experience but am looking for an internship to add to my skills. I was going to submit to Mike Rowe but it looks like theirs is currently on hold. Have you thought about offering 6 month internships to vets? The military offers skill bridging that allow service members to go learn a trade at the end of their contract while being paid as a military member. This means the service member cannot be compensated privately for their time while skill bridging. This is great for small business owners and service members learning a trade.

You can do the same thing with your phone. Changing forms to pdf

I just say fiba-fooose is my write-off son!! And that power stash is damn good!

Did a pre 1800 farmhouse. Didn't want soffits etc put splits in each room, kitchen 3 baths 4 bedrooms big place. Greatly efficient best is only need to condition the room you are in. The only con is the indoor head.

It sucks , when I started the handyman business 2020 i made 45 pay about 8 , now in 2021 i made 67 and i got a bill of 18 gs man i feel i am buying the food and beer for those on welfare it sucks

Taxation is theft. Preach on.

Receipts used to stress me out. I try and buy everything from places that have apps so they save everything for me, so I don’t have to save every receipt and scan everything. Home Depot Pro, Lowes Pro, Ace Hardware, Rings End Lumber, and my Bank Of America business account. Linked with my quickbooks saves everything. Anytime I swipe my card it categorizes everything for me.

We installed Daikin mini-split AC/heat pump units in our house in 2020 to mostly get efficient/convenient/quiet AC. We have 2 outdoor condensers and 5 indoor heads. 1 heats our finished basement area, 1 in Fam. Rm., 1 in Sunroom, 1 in office, 1 in Master Bedroom. They worked great until Fall 2022 the 3 zone condenser failed and it was difficult to diagnose - suffice it to say, Daikin is difficult to deal with for warranty issues & 3 of our zones are still down in Feb. 2023. I would AVOID Daikin & choose Mitsubishi or Fujitsu.

I’ve got a 2800 sqft house with 4 mini split heads on the 2nd floor. The best choice we made.

I was wondering about you Handyman. Who are these irs type people

Day one of business I had a payroll company and let them handle all my employee taxes. The business side came at a struggle with a 30,000 tax lien, and learning quick books pro reports were not accepted by IRS unless you have a CPA. Lesson learned pay the $$$$ for professionals your time is valuable.

a rocket stove is probably the cheapest way to heat a large area. if inflation gets any worse you can also switch to burning cash, like the Federal Reserve

That dog is SO CUTE

I heard those 87 thousand the money for them got lessened and stoped. Best to research to see where the information is at. Thank you.

Mini splits can go anywhere! Look at what the Japanese have done, investing a ton of time and energy into developing mini split technology. Mitsubishi, Daikin are best units you can buy. If in northern climate, make sure your mini split is also a heat pump for optimal heat output.

The mini split thing is interesting. In no way do I have any idea about HVAC efficiency but it seems if you can micro manage your requirements - like I don’t need the guest bedroom to be 75 when it’s not in use, that seems better than my furnace just trying to hit a temp I’ve set for the family room where we spend 95% of our time.

Your beautiful pup doesn't like it when you "talk to yourself" does it? Hahahaha. I had a dog once that was disturbed by singing.

Yes you can heat your house with mini-splits. Your bill will be $1000 not 500

They have heat pump ahu now.

I started my first business commercial / industrial electrical contracting, within a couple years I had 40 employees with a lot coming in and a lot going out. My first full year in business, I done exactly what my accountant told me to do and paid estimated taxes quarterly. End of year, I thought I am good because I paid all of those quarterly taxes! She done my taxes and said, "you owe another $32,000". That caused some sleepless nights! Tried a couple more accountants and each year was a stressful battle! A few years later I started my engineering business but I the best thing I done was found my current CPA. Second best thing I done, pay estimated taxes monthly instead of quarterly. I set up a tax checking account which is used for estimated tax drafts only. Each month, the CPA emails me with fed & state taxes to be paid that month and she sets up a auto draft, I transfer funds from business checking into tax account and done. Also, around Oct I will look at annually gross and estimated net YTD along with estimated income for the last quarter of the years, the CPA adjust my Nov & Dec estimated taxes accordingly. A "good" CPA makes the process much easier.

I get around all of that by taking payment in Marlboros and Miller Lites!

The handy Stache….. need to make a handy stache hat so I can ware it on job sites… the utility stache

Tax accountant is mandatory. Great video as usual!

More importantly, tell us how you get so many sponsors

Haven't followed up in a while. The stache makes you look like a different man.

Mate, is that a little Staffordshire Bull Terrier you got there? If it is, you’ve just climbed a few more rungs up the good bastard ladder. Best breed of dog in the galaxy.

In your opinion (because I value it) is quick books online worth it?

4:24 What spooked Pali? My Staffy shakes like a leaf now whenever she hears fireworks or big boom noises. PS- great video, just did my Taxes today. Make more, pay more percentage of total income 😥 Some cash jobs good for a few things like groceries and gas. Will help lower your total taxable income a little bit, but still gotta go legit if you want to make good money and put into your Social Security fund.

It’s just money, not love ❤

Get the book Vultures in Eagle's Clothing and set yourself free or just pay for your enslavement.

I'm here for the dog

over 11k for oil leak?!!?? whoa!!! my brother had a motor replace on his car for 7k… but it’s not a big expensive truck… that’s crazy!!

Where's the papparazzi when you need content?! lol.

Hello

Haven’t done my taxes in 6 years. Am I worried, yes but I didn’t make more than 40k annually, I’m just a single guy but since they only require your last 3 years I still sleep okay, I mean they can’t throw me in jail or can they?

Polly says “ why the hell is he yelling at me about the IRS?”

What are some good ways to make your money work for you other than 401k and stocks?

I just take a picture and put it on Google drive.

11k?!! rear main seal leak? still jfc

Damn! 86 for a light bulb!

Holy shit. 40k on top of your estimated taxes. You had one hell of a year!!!!!

Modern day slavery were living in today

Its about time we started collecting from the DEADBEATS

bro its cold. get the dog a blanket for the body. If you're cold for a hoodie so are they. :) Love your content. Take care of the pup.

You have mini splits by paying 2000 a month for your electric bill 🤣.

40k, that really sucks

👍👍😎🤟✌️

Why would you pay that for a bulb, I get my refrigerator bulbs for Walmart for $2

Handyman, contractors in my area just don't pay taxes because most of them are already used to prison. p.s. good advice in this one

$11K for an oil leak??? You could have bought a new engine for that amount!

great video man i hope you don't drive a ford.

Best way Ive found to keep my money is just not file. Should they contact me they will then have to prove I'm not a "Taxpayer", they can't because I'm not and most likely neither are you.

Why is your poor pitty shakin so bad!

Wait, by 1:27 min/sec in you said you paid like 80$ for a lightbulb? I thought you were THE HANDYMAN! Cant change a lightbulb out? Doesnt sound very handy lmao just messing with you...I am sure it required a screw driver. Edit here: I really appreciate you making videos on how to for the handyman. Great help bro. Keep them coming. Customers, wives, girlfriends, etc...you know what I'm saying lmao

isnt that rich!guy that charges $200 an hour but complains about a $85 bulb.....goes both ways im sorry to say..just sayin

Be careful talking about this stuff online.

HANDER'S