Тёмный

Is Gtechniq Crystal Serum Ultra Worth It? RESULTS AFTER ONE YEAR! 

The Detailing Space
Подписаться 36 тыс.
Просмотров 18 тыс.
50% 1

Is Gtechniq Crystal Serum Ultra Worth It? RESULTS AFTER ONE YEAR!
The final update, recorded 13 months after Crystal Serum Ultra and Exo v4 were applied to the car.
So, are these expensive coatings worth it? Let's find out.
----------------
Chapters:
00:00 Intro
----------------
Products:
Gtechniq Crystal Serum Ultra Light - amzn.to/3o7g2dr
Gtechniq G Wash - amzn.to/3ubJhQd
Gtechniq WM2 Microfibre Wash Mitt - amzn.to/32B4Ca6
Gtechniq Exo v4 - amzn.to/3rZRELK
Gtechniq W4 Citrus Foam - amzn.to/35ooXAt
----------------
Social Media:
Facebook - / thedetailingspace
Instagram - / thedetailingspace
Mat's Instagram - / randomlyset
Twitter - / thedetailingspace
----------------
Amazon Links
Equipment
SPTA Cordless Mini Polisher - amzn.to/3hqylam
Pressure Washer (Kranzle 2160TS) - amzn.to/3bpWXLn
Quick Release Connections - amzn.to/2vREA1Z
Hozelock Hose - amzn.to/2wx6h03
Kirkland Microfibres - amzn.to/2GwGIzR
Sketchers Waterproof(ish) Boots - amzn.to/2JB51zt
Video Gear
Camera - Panasonic LUMIX DMC-G7MEB-K - amzn.to/3nZvxRK
Prime Lens - Panasonic LUMIX H-H025E-K 25 mm - amzn.to/39WlDLJ
Gimbal - DJI Ronin-SC - amzn.to/3iBgLQ3
Wireless Mic - Rode Filmmaker Kit - amzn.to/3palquS
Shotgun Mic - Rode VideoMic Pro+ - amzn.to/2KByVEN
GoPro - GoPro Hero 4 Black - amzn.to/2XYT8Y8
GoPro Gimbal - Feiyu Tech G4 - amzn.to/2Mg63SI
Main Tripod - GEEKOTO 79" Light Aluminium Tripod - amzn.to/2Y1gE6R
Slider - Neewer 80cm Camera Slider - amzn.to/3p1dtbb
Video Light - Neewer SL-60W LED Video Light - amzn.to/3p5eVJK
Drone - DJI Mavic Pro - amzn.to/3p4WzZa
#gtechniq #csu #crystalserumultra #ceramic #ceramiccoating

Авто/Мото

Опубликовано:

 

5 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 52   
@realryanward
@realryanward 5 месяцев назад
I did CSL + exov4 over 2 years ago on my f150. I'm just about to do CSU +v5 on it now as it got body work done from insurance that jacked it all up. This stuff is NO joke. I go through touchless carwashes and hand wash weekly, still beads water like crazy in most spots.
@alex_tricker
@alex_tricker Год назад
Have really enjoyed this series, car looks incredible! Would love to see updates every now and again, always enjoyed the updates!
@TheDetailingSpace
@TheDetailingSpace Год назад
Thanks! Will do!
@patrickvennard838
@patrickvennard838 Год назад
Great video the CSL and Exo combo looks good and definitely out performed my Gyeon Combo.
@TheDetailingSpace
@TheDetailingSpace Год назад
👍
@stevenjones19-m8i
@stevenjones19-m8i Год назад
Hello Mat, great video,the GTechniq products have certainly protected your car very well,
@TheDetailingSpace
@TheDetailingSpace Год назад
Absolutely
@tmphotography8443
@tmphotography8443 Год назад
Good to of seen a real world test documented . These coatings aren't for me I enjoy the whole applying a wax etc process but on other family members cars then yes a coating would make my life so much easier in keeping them looking good longer
@TheDetailingSpace
@TheDetailingSpace Год назад
I know what you mean... I was in two minds at first, as a) I like waxing and trying different waxes and sealants and b), well RU-vid :D
@tmphotography8443
@tmphotography8443 Год назад
@@TheDetailingSpace it's just polishing you dislike ? MOT tomorrow and if it does fail it will be the most clean car they have had to test this month
@TheDetailingSpace
@TheDetailingSpace Год назад
I enjoy polishing TBH. Can't be a cracking 50/50
@danieldiamond7790
@danieldiamond7790 Год назад
Just coated my new bike with CSL and Exo. Had it on my last commuter bike too and put up 50k before selling it and had not noticed any loss of performance in that time. Love all GTechniq products, super easy to apply and great performance. Have to say I prefer the older packaging though!
@TheDetailingSpace
@TheDetailingSpace Год назад
Got to admit the new packageing looks better 🤣
@1stfrompuertorico568
@1stfrompuertorico568 Год назад
Nice always the Gtechniq products like CarPro's
@TheDetailingSpace
@TheDetailingSpace Год назад
👍
@pauljackson5672
@pauljackson5672 Год назад
Hi, just wondering what preparation you are going to perform before applying another top up coating.
@TheDetailingSpace
@TheDetailingSpace Год назад
A thorough clean, decon, maybe a cleansing polish and then coat
@gnawty4662
@gnawty4662 Год назад
May I ask what product you used in your pump sprayer as your first step?
@Geeky_detail_reviews
@Geeky_detail_reviews Год назад
Great series though loved watching through
@TheDetailingSpace
@TheDetailingSpace Год назад
Thank you.
@75folarin
@75folarin Год назад
Love ur videos great jobs u always do how much do u really charge
@TheDetailingSpace
@TheDetailingSpace Год назад
Depends
@stillincarlsbad5633
@stillincarlsbad5633 Год назад
Is there a genuinely unbiased testing channel out there???
@TheDetailingSpace
@TheDetailingSpace Год назад
We like to think we're unbiased.... If it's good we'll say it's good. Don't see what the issue is tbh
@patrickko355
@patrickko355 Год назад
How does installation of cs ultra differ to csl? How long do you let cs ultra sit for before wiping off?
@TheDetailingSpace
@TheDetailingSpace Год назад
I'm not sure, but I'll ask 👍
@majorbravo5440
@majorbravo5440 8 месяцев назад
I used it and you only have to wait about 20-30 seconds
@BySixa
@BySixa Год назад
Hey mate, I'm an avid car enthusiast but gtechniq make it very clear in their promotion for this that they need to ensure proper training to apply this. Surely there would be no harm if I was to get this and do it myself - pre wash, contact wash, detar, iron remover, clay bar, dry, correction and then the coating. What are your opinions? I'm unsure what they're so scared about? Thanks, Mark
@TheDetailingSpace
@TheDetailingSpace Год назад
I believe it's due to the warranty you get with CSU.... I'm not sure any retailers would even stick it/sell it to you.... You can however buy the Light version
@FastRedPonyCar
@FastRedPonyCar Год назад
@@TheDetailingSpace Correct. We just got my wife's XC90 corrected and coated with CSU and not only is it for the warranty but also it requires at least 2 people who know what they are doing to apply it properly as well as 24 hours curing time surrounded by UV lights. For the DIY'er , CS lite is the better option and with proper maintenance care and the supplemental ceramic sprays like Gyeon wet coat (my favorite) or Gtechniq's Easy Coat and an annual or bi-annual application of EXO, there's no reason why you can't prolong the life of the CSL for well beyond 5 or 7 years.
@jeanalex8992
@jeanalex8992 10 месяцев назад
I hope you haven't attempted to apply CSU on your own car.. I had my car professionally coated last year with CSU and it requires at least 2 people (better with 3) who know what they're doing, they do it fast because the CSU liquid has to remain cold and it has to be buffed relatively quickly after application.. My car looks immaculate though even after 12 months so it was well worth it.. But if you f'ed up the application, you'll have to sand it out quite aggressively as CSU is very durable as with most professional grade ceramic coatings..
@BySixa
@BySixa 10 месяцев назад
@jeanalex8992 no I did not
@Douglaskyle9191
@Douglaskyle9191 7 месяцев назад
So I had CSU applied after two stage pint correction and I still see light swirls in my paint under bright direct sunlight but in the shade it’s perfect. Detailer said he could redo the hood while I wait but some people are saying it needs to cure under UV? This make me think he is full of shit.
@jonfrench7133
@jonfrench7133 Год назад
what do you do with bird muck. I will remove asap using a QD and mf towel but it always leaves damage. Would you suggest leaving to the weekend clean without risk of etching ?
@amirdaoud1013
@amirdaoud1013 11 месяцев назад
Do you apply EXO4 on top of serum light ?
@TheDetailingSpace
@TheDetailingSpace 11 месяцев назад
Yes.... Though I have crystal serum ultra.... Exo is the absolute last product
@Geeky_detail_reviews
@Geeky_detail_reviews Год назад
Hi Mat, how many miles you done though. I know you said it was low miles The reason I ask is I do 100-150miles per day do currently testing a few. Not tried the Gtec range yet. Cheers
@avdavd4729
@avdavd4729 Год назад
I have CSU and Exo on my daily, since the application last year I have driven 7000 miles (5months) and it is as strong as day 1. Unbeatable performance
@TheDetailingSpace
@TheDetailingSpace Год назад
I think it was about 6,000 from the start to the end of the series. A lot of that in the last few months as the Mrs was on maternity leave at the start of the series.
@wolfiemedia
@wolfiemedia 11 месяцев назад
What did you spray before the snow? 👍🏻👌🏻
@TheDetailingSpace
@TheDetailingSpace 11 месяцев назад
Just some citrus APC
@wolfiemedia
@wolfiemedia 11 месяцев назад
Cool 👍🏻 thanks for the reply 🙏🏻
@TheDetailingSpace
@TheDetailingSpace 11 месяцев назад
No worries
@marinejunkies9625
@marinejunkies9625 Год назад
Can you put the ultra onto off ppf?
@patrickhostler5939
@patrickhostler5939 Год назад
How do they compare in cost compared to other brands out there?
@TheDetailingSpace
@TheDetailingSpace Год назад
Maybe a little more expensive - but quality isn't cheap 😉
@1stfrompuertorico568
@1stfrompuertorico568 Год назад
FIRST!!!!
@ilikechickensausages2075
@ilikechickensausages2075 Год назад
Rico the 55 year old man here is your prize 🍭+🎈
Далее
Gtechniq Ceramic Coatings Explained
28:53
Просмотров 30 тыс.
Ceramic Coating Your Car? EXPOSING THE SCAM!
8:33
Просмотров 158 тыс.
DON'T BUY CERAMIC COATINGS BEFORE WATCHING THIS !!
37:51
Mechanic life #mechanic #cars #automobile #tools
0:21
Mechanic life #mechanic #cars #automobile #tools
0:21