Before you BUY!!! Check out thid video about the better display we found! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-aEywj--W800.htmlsi=8wNk3lbi-Fidbr9m
Thanks for the information and for sharing on how to complete the installation. I appreciate it all so yeah I did subscribe and I promise to keep coming back for more and sharing your video's with as many people as I possibly can because you definitely deserve it. 👉💯👈
Could have ran the HDMI cable out of that cutout on the top, straight down those 3 cable tie hooks on the back, down into the GPU. Would probably look less crazy than the open storage panel being missing. It's likely what they had in mind with the exterior tie hooks and the top cutout.
exactly what I thought to, he was litterly holding on the hole when routing the cable hehe 😅 culd even fasten the cable with ziptie to the rear fanshroud/-grill Should make the edges of the screen white with paint or electrician tape
Or they could of just not cheaped out and built in a converter. That or just use a USB to HDMI adapter and just us a Motherboard header. Technically SATA is also capable of feeding a video signal.
We appreciate the info, we also made another vidoe talking about a better display compared to the one HYTE sells on their official website. Check it out! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-aEywj--W800.html
Thanks for showing how to install the screen. I notice that there's routing holes inside the case. I'm not sure how you gonna close that top panel with the cables crossing over like that. Definitely would rout through one of the holes inside the case and out the back. You can also adjust the gaps around the radiator by moving the fans and mounting plate around.
I'm a minimalist on my builds. It's so hard to find non-RGB parts and cases without glass side panels. Just my opinion but I don't want a Christmas tree underneath my desk.🤣 But honestly that is a rig I would be down to build.
Ended up doing a build very similar to this one, same case(black&white tho) nzxt rgb duo fans, nzxt kraken with the lcd screen 140mm fan radiator, asus motherboard. Corsair vengeance white 32gb ram. Mostly all white/black and a few silver parts. Waiting on this screen upgrade since it’s out of stock…
Awesome! It's great to hear that our community is benefiting from our video! We also made a video about a better LCD Screen Display for HYTE Y60, you might wanna check it out! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-aEywj--W800.html
It’ll be really hard to stick the white vinyl to the materials that we use to 3D Print. However, we’ve been thinking about using white PLA material to print the compartment so it’ll come in white. We might even sell it if there’s a demand!
If those wallpapers act like screensavers and you could have aida or something alike running it could be the best of 2 world, maybe the lcd needs to be a touch screen then or not.
Wallpaper Engine is cool but a crazy resourse hog. My favorite "rain on street at night" wallpaper causes my 3080 to spin up and yanks up my power draw from 180 to 350 W...
That definitely should not be the case. Make sure your appropriately have the settings in Wallpaper engine to a capped FPS and with proper quality. Shouldn't get anywhere near max load with just a desktop background (speaking as a 3080 and 4090 user)
No clue why they design these display like this, there is absolutely no reason to actually use a display port for the video signal (outside of either being cheap or just rebranding a pre-existing product). All they had to do was add in a converter and it could be patched directly to USB (which can be done directly off a MB header)
We agree that it shouldn't take out another HDMI slot on your GPU just to display the screen panel, hopefully they can come up with a V2 display that does not require external cable managing.
Hi love the pc, I’m in the uk and looking to buy a new pc in the next few months. Is it possible to have this pc with a intel i9 processor and rtx 480 ? If so how much more? Also do you post to the uk? Thanks
Hi, we appreciate you reaching out to us! Unfortunately, we only ship within the continents of the United States. You can look into our services which include PC build consultation. We can guide you through buying yout own parts, assembling and installing them! Let us know if this is something that interest you!
Does it makes sense to connect a hmdi to bluetooth adapter to the controller and a bluetooth card to your mainboard and share the screen? If this is possible you would save the bad looking cables at the back of your case.
That sounds doable but not always necessary since most individuals will orient their PC in a way that the back is not showing. But if you try it let us now how it goes!
So i put a 7 inch mini LCD screen in my pc because i saw it on youtube, looked really cool. but once i got it installed and plugged into the HDMI windows defaults my desktop to the little screen and i cant use my big monitor...cant figure out how to tell windows that my big monitor is my MAIN monitor and the little 7 inch one is #2 it just refuses to work no matter what i try...anyone know what to do here? the only thing ive been able to do is "duplicate screens" which is useless because i need the 7 inch for displaying cpu/gpu temps ect ect. im 6 hrs of effort into it and nothing seems to work
Take that HDMI cable and run it through the opening of the handle to pull off the top panel. There is plenty of space for the HDMI cable to fit through the opening.
Thank you for creating this video, I bought everything on your list using your links (except for the out-of-stock AIO and LCD). take a like+sub as well, great work!
Wow! Thank you so much for the love and support! ❤️ this means a lot to us! Lian Li came up with a new series of AIO, you can check them out, it already come with 3 infinity fans included: amzn.to/3QAnxIT Here is an alternate for the LCD screens: amzn.to/459LWJy
would this work if you used the integrated graphics (intel) instead of loosing a monitor from the dedicated gpu? my graphics card only can do 3 monitors but i have 1 extra hdmi on the motherboard.
The FPS difference would not be noticeable without looking at the FPS counter. If you're trying to maximize every single frame per second, you could choose to unplug any additional displays when playing GOD MODE💪💪💪
We mainly focus on custom PCs, so we have not worked with an Xbox, but I think it is possible. The best way would probably be to 3D print some mounting mechanism to add the screen to your Xbox. That would be an awesome project to see!
Do you all think you could address this on your RU-vid show how it might be done are actually installe one you would probably get a lot of views and likes 👍
This is a really cool idea. If the next generation Y60 has a more elegant cable and board solution (cleaner look inside) then it'll be an automatic buy for me
As of now, there isn't any LCD screen that is big enough for the front glass panel of the NZXT H9. Maybe we can try looking for a similar size LCD screen and make a frame for it 🤔
Hey mate, thx for the video! It's amazing, such a cool case and even with the possibility of mounting an additional display, but you haven't thought about how to route the cables? This is ridiculous.
@@archetype_origins I completely agree, make it a screwless design. Snap n latch style. That said, despite the great looks for these cases and this particular form factor, the unfortunate reality is they tend to have some of the worst thermals compared to traditional high airflow cases, especially if you have to vertically mount the GPU. Quite frustrating if you like this form factor, but not a deal breaker, yet.
Hello, my fellow Malaysian🇲🇾, I personally think it’s a really good addition to the case. When you’re focusing on gaming you won’t really notice it’s there. I’ve never tried purchasing in MY, you can check Lazada, Shopee or even Amazon Singapore to see if it’s available.
The screen makes the case really look nice. Shame it's rather small on the inside, despite the dimensions overall. The NZXT H9 is only 3 cm taller, yet in that you can fit 360's at the top, bottom and side at the same time. In this one you only get 360 at the top and 2 fans on the side (maybe you can mount some underneath the bottom, but if you wanna go rgb you'd probably like them above the bottom panel). Too bad. If I could incorporate the inside space for all these fans that the nzxt h9 or 011 (and that dual chamber design) has with that addable screenpanel, that would the so awesome. As it stands that screenpanel alone doesn't outweigh the downsides for me, so I'll probably go with the 011d when they release it. That live wallpaper looks crazy good nonetheless. If anyone gets this case (or has it) and screen, they can not go for just some static image.
@@archetype_origins Guessing I was holding it for their Y70 case. That is rather nice. Hopefully you can use the touchscreen as you did the LCD in the Y60 build here, to just display a wallpaper. Even though some might view that as criminally underutilizing the touchscreen, I don't see why it shouldn't be possible (should people want to use it in that way). Only downside I can realistically see is that the bottom fans would have to be mounted underneath (not ideal for the rgb enthusiasts) if the GPU is mounted vertically, since it sits on the bottom plate. Unless you can use some vertical mounting solution from other vendors. No case is perfect though. And it is a big improvement in my eyes, and their websites seems to confirm. Since this case offers way lower temps (almost 20°) at lower fan speeds, compared to the Y60.
Would have been a perfect build, apart from... 1. Why have you routed your GPU power cable like that? Ditch the LED cable and hide it behind the GPU, especially when it's offset to the gap in the M/B tray. 2. The screen BLACK borders all being different sizes (couldn't they centralise the screen or at least make a WHITE template to cover them up?) and wouldn't have looked as noticeable in a black case/build. 3. Without having this case, couldn't you have routed the HDMI cable through the notch at the top of the rear panel? You shouldn't have to remove the hard drive bay.
Love the design, LOVE the case and will probably get myself one in the near future for my new pc build that'll last me some years to come But the LCD in my opinion is totally not worth it. I like the idea but it takes away the beauty of the view as a whole, in short it demolishes why they designed the case
This is the reason we LOVE building PCs so much. It is so customizable! Without the screen is also gorgeous. Your new pc build will definitely last for years to come and you can upgrade bits and pieces as you need! Send us a photo when you're done, we would love to see it 😍
This is a custom order, send us an inquiry with your info and we will send you a payment link for the 3D-printed compartment! archetypeorigins.com/contact
hello, how do you tape everything on the back like that? did you just fold the white wire thingy? and what the thermal paste for? i dont see you use it. And also this is out of stock right now 🥲
Hi, we taped all the ribbon cable to the back of the LCD screen using electrical tape. Thermal paste is not needed in this LCD screen installation at all. We also linked some of the alternative you can get from Amazon for around the same price, they are the same size screen as the one they sell on HYTE official website.
am very strongly considering this case and like the idea of the lcd. However, I have an AMD 7900xtx with 3 display ports and 1hdmi. I run triple monitors for gaming on the dports and a 4th monitor above for web browsing/tv/media/etc, so I have no available hdmi ports. Am I right in saying that the lcd wont work for me or is there another alternative?
What CPU are you running? If you have a CPU with integrated graphics, you should be able to plug your HDMI cable into your motherboard and get a display from there!
Where can I find this whole pc set up?? Can you buy it pre built? I’m looking for a nice set up. Or if I could get all of these parts and buy it all to build. Thanks!
Not only is the screen massively overpriced they couldn't even have the controller board built into the screen with a thin cable running to a pcie, would have made a lot more sense.
That's why we made a video about this LCD screen display that you should get instead of the one from HYTE official website! Check it out: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-aEywj--W800.html
Still overpriced, still uses 2 cables, should have a thin cable to a pcie, you should still be able to display system stats, or animations.@@archetype_origins
yea even worse is its not like they cant they made a seprate screen for the y70 for those who got the y70 without the screen and its far better and is a ready made you can just plug it in hopefully they do the same for the y60 and not this diy nonsence its not even that much cheaper compared to the y70 screen for all the trouble you gotta go through
Yes white cables would definitely elevate the look if you place your PC in a position where you can see the back. If your PC is positioned in a corner it shouldn’t be necessary.
Bellissimo pc ed ottimi componenti... Peccato per il cable managment pessimo. Aveva almeno 3 modi per far sparire i cavi sia dall'alto sia per l'hdmi passandolo in basso.... così è pessimo se pur con il coperchio non si veda.
