Is The IMS Bearing About To Fail On My Porsche Boxster 987? | Project 987 Pt.9

Подписаться 65 тыс.

Просмотров 11 тыс.

0% 0

In this episode we're inspecting and replacing the IMS bearing and whilst we're there the clutch and the rear main seal.
DESIGN 911 - www.design911.co.uk/
TORQUE BOXSTERS - www.torqueboxsters.co.uk/
For business enquires please contact team@road-and-race.co.uk
Music by Karl Casey @ White Bat Audio
This show is made for entertainment purposes and whilst every effort is made to ensure the information included is correct is should not be relied upon as accurate and is used at your own risk. It is the sole responsibility of any persons(s) using the information / advice contained within that their level of competence is appropriate for the task they want to complete. All users should have all tasks checked by a professional qualified person where appropriate. Road & Race and individuals associated through ownership and contribution will not accept and liability for any loss, damage, injury or negligence direct or indirect for use of the information / advice contained within.

Авто/Мото

Опубликовано:

1 апр 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 44

@stephenwithaphnod 2 месяца назад

Had Paul work on my 986 really knowledgeable guy, replaced my front suspension and went all over the car to tell me things I needed to keep an eye on, great guy took photos of all the work he did and kept me up to date with progress.

@RoadandRacetv 2 месяца назад

Yeah, he's a legend.

@tobiaswittwer9398 2 месяца назад

There are actually two types of single-row IMS bearings. The smaller one (up to 2005) and the larger one after that, which exhibits a much lower failure rate, but can only be replaced by splitting the crankcase. The IMS was eliminated with the move to the DFI engines.

@graham6229 Месяц назад

I believe my 986 had a double race IMS bearing which didn't fail. I had a new one put in anyway at 120,000 kms to be on the safe side, when the clutch was replaced. The 987 had a single race and that had problems but mainly in the USA where oil quality and so on is not quite the EU standard. I also changed the oil and filter ( when in Queensland ) every 4000 kms. Great insurance for only a few dollars.

@seanwalsh999 2 месяца назад

The two things that increased the enjoyment of my 2000 Boxster, replaced the 10 year old tyres and put back in the stock exhaust. Those low profile tyres have to be fairly fresh or you feel every bump in the road because the side walls no longer provide much flex, and as to the exhaust the after market exhaust had a horrible drone at highway speeds. Still, I would like to get one with the PDK. Thanks for posting.

@maxcarter970 2 месяца назад

Thanks for sparing us the endless sped up footage of men undoing bolts that most car vids include.

@RoadandRacetv 2 месяца назад

No problem 👍

@mwong987 12 дней назад

i have an early 2005 boxster, thanks for this video!

@btracing 2 месяца назад

But did you clean the engine before putting back the clutch? It was so dirty 😂

@neilobusk 2 месяца назад

Excelleeeeeent vid.. When a Neil asks for help to fix a potential problem...its a good thing.... N x

@djambrosia 2 месяца назад

Somehow I managed to drop the gearbox in a single garage using a jack. I had the same intention of replacing the IMS but was greeted with a leaking butched cover plate covered grind marks! Sadly I lost all faith in the car at that point, so popped a new clutch/flywheel in, replaced the RMS and sold it on. I presume on the 987 engine you don't need to lock the camshafts.

@GeorgeAusters 2 месяца назад

Oh man it looks soooo much easier removing a gearbox up on a lift.. Just spent a full day doing a clutch on my BMW in my driveway!

@dominotr7 2 месяца назад

Watched that earlier - looked a real tough one; especially the refit. Great job mind.

@RoadandRacetv 2 месяца назад

Hey George, saw the video. Top work. Quite an effort that. I wouldn’t have attempted it on my drive!

@JimBob_1975 2 месяца назад

Nice video, could you tell me how/ where you supported the engine with the gearbox removed?

@RoadandRacetv 2 месяца назад

Thanks Jimbob. It’s supported just where the gearbox meets the engine. There’s a flat surface. If you look at my previous video I show exactly where.

@graemecopland703 2 месяца назад

I like these maintain-it-yourself vids. Would be useful if you could put a timer on the video to give some idea of the realtime it takes to complete these jobs. Other than that - good job!

@RoadandRacetv 2 месяца назад

That's a good idea. This job took 9 hours but obvioulsy next time it'd be quicker as I now know what I'm doing.

@stephenauty2402 2 месяца назад

I'd have placed the gearbox on the floor asap. Good job though...oil leaks from my 986 was the actual IMS cover not the RMS but I replaced both as well as a new IMS bearing , clutch , flywheel , clutch slave etc etc.

@RoadandRacetv 2 месяца назад

Yeah, it’s safer but it’s soooo heavy! Surprisingly the stand holds it quite securely. Good stuff doing all that work yourself. Are you a mechanic by trade?

@stephenauty2402 2 месяца назад

I’ve got a really strong steel table on wheels that I always put under the car for placing tools mostly but just in case the lift fails. Won’t happen but… Trout farmer actually but have to service all my work vehicles and machines so fairly proficient, currently working on my 996 Turbo brakes (new calliper seals etc) Good luck with the Boxster

@EppingForest304 2 месяца назад

If you had that bearing & clutch replaced at a Porsche dealership, I reckon it would be a £3k-ish invoice!!

@roxximusik8958 2 месяца назад

At the VERY least ! With a high mileage vehicle around 20 years old, you can be fairly sure that other parts and jobs will need attention with either the transmission or engine out of the chassis. Rusty brake lines and corroded up aircon pipe terminals spring to mind. Try to always budget for extra costs !

@johnsamson-snell9558 2 месяца назад

Now the IMS is fixed, is the next job bore scoring? I’ve owned 5 Boxsters over the years starting with the 986 onto the 987. Absolutely loved them them but no more. The bore scoring issue is always there in the background for any high mileage Boxster.

@RoadandRacetv 2 месяца назад

From my research bore score is due to the forged pistons in the 3.4l and larger engines. The 3.2l and below use cast pistons that don’t expand under heat so no scoring.

@neallandsburgh4222 2 месяца назад

The EPS bearing actually uses roller bearings (cylindrical) rather than ball bearings. There is endless debate on the benefits and disadvantages of both types. In the end it comes down to personal choice and location inho. US seems heavily biased toward LN ceramic bearing while UK seems more open to EPS

@porscheg50 2 месяца назад

No locking of camshaft ???😬

@RoadandRacetv 2 месяца назад

It's recommended but time consuming. Most people I spoke to don't bother. I guess we'll see when I start the car....

@ultimateteacher 2 месяца назад

what was the mileage on your Boxster when you pulled the IMS?

@RoadandRacetv 2 месяца назад

80,000

@ultimateteacher 2 месяца назад

@@RoadandRacetv Thanks and the IMS single row still looked good!

@davyboy888 2 месяца назад

Wasn't the problem with the IMS down to it being sealed and not being lubricated by the engine oil ? I thought 'the fix' was a kit that comprised an oil way into this... or am I going mad ?

@RoadandRacetv 2 месяца назад

There is an option of a kit that has an oil feed to the bearing. I believe the main problems with the single row bearing were it being not able to take the loads and/or grit getting into the bearing during manufacturing that causes wear.

@davyboy888 2 месяца назад

@@RoadandRacetv I thought the reason for failure was lack of, or poor, lubrication causing overheating and failure. From an engineering perspective, spec-ing that type of [sealed] bearing in a such a location isn't a good idea at all.