Is this the Worlds Best CVT Drive Belt!? We find out! 

Is it the worlds best? You decide! We do get them through the Geiser section of our store - Dozer pays your shipping! www.fullthrottleoffroad.video/geiser

I drive a Honda pioneer and just watched a 17 min long video about belts. you guys are awesome. !! great to see the tech in belts getting so good. I NEED An X-3

First off, good job on your videos, I always enjoy them. I particularly like your evaluations/tests and your efforts to quantify the results. In regards to your belt testing I have several questions and comments. 1. I noticed in a reply to a comment that the ambient temperature during this test was 81 degrees F. What was the ambient temperature in the other tests where you provide belt temps? I have noticed, with a Razorback belt temperature gauge during several dune trips in my 2018 XRC with an OEM belt and no other changes (stock clutch, tires etc) that belt temperatures are definitely a function of ambient temperature. I don't drive as hard as you guys do but when I'm in the sand I need to use the throttle. I wish I could say that my observations are based upon a single variable, ambient air temperature, however, a variety of sand conditions from moist hard pack to dry and fluffy play a large role in how hard the belt needs to work. I also noticed an increase in belt temperatures with a half windshield. 2. I see again in the comments that you had a KWI clutch in this and a previous test. What about earlier tests? 3. Lastly, would it be possible for you collect all of your data in one table that lists the belts you've tested along with test to test variables and the results? Keep up the good work!

when you skip ahead but still land on the thank you for not skipping ahead

WOW...WOW....this is awesome! Wait....??what's this...out of fuel. At this point I thought sweet nascar pitstop...aannnd🤔 nope nothing. I thought FULL THROTTLE meant... Hammer down, pedal to the metal, threading the needle, zinging BB's, hauling ass, delivering intimidation, peeling pavement, ball's to the wall (not to the left)... the break is on the left..you know FULL THROTTLE. LOL I was hoping for a nascar pitstop for fuel, a blown belt, seeing it can do over 15 laps. Either way I love what you guys do enjoy watching your show, As a Gear head I love watching 45 minutes worth or more. Keep up the awesome work.

I put a gboost badass belt lasted 2 weeks but I do a lot of rock climbing slow riding

You T shirts only last 2 washings. Need to go with Beefy T next run.

Awesome video as always. I'm sold, just grabbed one for the RZR Turbo. Thanks for the useful content.

Can we see some testing with the hunterworks belt?

only because I'm trying to understand how failure occurs with these belts, I'm guessing heat is the belts biggest enemy? I thought they would break easier when your climbing up rocky terrain or under weight load? I guess I'm just trying to understand how far I can push my new atv.

It's 2024 and they STILL don't show a belt for the Polaris RZR Pro R 2 on their website...

WOW that's an impressive belt! Can't wait to see what temps I can get out of the rzr at the dunes with it.

Hunterworks is the best, prove it.

I bought one weeks ago.. usually blow one every 1.5 days at the dunes on my X3.. this one is lasting so far!

Did you break the belt in first or did you just install it and go for it?

Sounds like the belt was already the winner before testing

Sounds impressive, but so did the badass belt.... I bought one and it was about the same as a gates gforce but twice the money. I'm currently running my two year old Polaris backup belt that has over 1500 miles on it and has been on and off the machine 5 times and still kicking ass... I'm gonna try out this new one that costs even more and It better work better than Polaris OEM or I'm gonna slap somebody👋

5:25 Awww Shucks... You too!!!

Willing to see whats the Evo belt looks like after the10 laps.

Is there only one bad ass belt from evolution power sports? As there was one 11months ago on this blog . Was just wondering if they are the same as there are now a few bad ass belts on the market thanks

Thank you. I watched all of it.

Wow! You guys really, really tried and ... nothin! I kept looking at the belt temp gage and it just wouldn’t get hot. Amazing! Great video guys!

Always watching content. It’s the best 💪 keep them up

Looks like the Turtle is dying to blow the 2nd place Champ 😂😂😂

Went to that siteand they don't have any products for a Maverick. WTH?

Hey if you guys had so many issues with the cvt belts why didnt you go with the yamaha utvs with there real transmissions?

Looked like a forest service road that wasn't closed off. Are you guys worried about a high speed crash with another vehicle. Good video.

Hope is everything is all good with you guys.

Did you break the belt in or does it come broken in ready to go

My new 2023 Mavwrick X3 DS Turbo has 200 miles on it. My rpms range between 9000-9500 at 65 mph....is this normal?

On the thumbnail you show the product from EVO, on the video you show the product grom GBOOST. I looked them up and it's 2 different companies that say powered by GBOOST, which one is the good one? Even SUPERATV has one now. I'm confused, but I want the one you used.

Hope all is well with you guys. Been awhile since last video. I was getting addicted. Lol

The ones that watch the whole video are awesome

do they make a belt for a 2016 can am maverick 1000 turbo xds?

Keep doing what you do the videos are helpful thanks for the imfo

Now that's a real test..

Have you tried the belts by HunterWorks? i.e. Hunterworks 2016-23 Polaris General Belt (HW-92G)

I’m kinda new to this belt thing. I am shopping for my next Cam Am Commander Max belt. Probably last a REALLY long time on that. Those are more of a pain to change.

Interesting that you mention Evo. I tested the GBoost two seasons ago, great belt sheds heat fast. As far as i know , Glen Erlandson started GBoost. I spoke with him several times before buying one, he never mentioned Evo. Looks like Can Am has the clutching thing figured out. Even with my clutches worked over by Airdam, with an STM secondary, i'd be well into the 200's (Razorback) on the second lap of your course. I've never tried the GBoost again, run OEM now. Maybe i should give it a try again. Speaking of that, where you in Baldwin ?

Full throttle…… and a 1/2 full bottle !

hey guys, love the vid, whats your feedback know about engagement and rpms? with that one

Excellent review and test as usual! Plan on picking one of these up as a spare when I use my current one. I've noticed when I switched to a competitors belt that my average belts temps were about 10-15 degrees higher vs OEM, but the belt performs the same as usual. No problem but did notice a slight shift.

Can you do a video on. worlds best belt vs hunter works belts

I'm sold...I'll buy one off your site...considering the shift gate/knob kit too.

Just gettin it 😎 😎 Man I have to get me a world's best belt awesome video guys 💯👍

Now try this belt out in the snowmobile world on mountain climbs !

So is the belt the same as the worlds best belt from evo that’s on your shop cause I can’t find the gboost one ?

Let us know when that belt finally goes. Iam sold on it already. luckly you quit because i was drinking a can a lap.Just want to know how long it lasted.

Try hunterworks belt

Was I reading mph?? 80 between those trees must be intense

I have a Honda that uses no belt but when I ride with friends every time I have seen a belt get destroyed was on a deep water crossing or things that put a big strain on the belt like rock crawling or crossing downed logs or something. I don't understand how your belts get smoked just driving flat roads at any speed. What am I missing and why do your belts fail so much?

Dumb question - Shouldn’t you still go through a break-in before putting these through their paces?

I love the video and you have convinced me this will be my next belt but question? have you tested the hunter works belt? I have friends who swear by them and I have considered trying theres as well.

So how much riding did u get out of the Gboost ???? Hours? Miles??

does it not need a break in period?

So its been a while what belt do you recommend still ??

Belt temp staying lower due to softer compound I guess. Less friction heating it up. Do they make belts for other can am side by sides cuz I need one for my commander lol

hi there, great video guys. is there any important difference between this belt you are testing from "G Boost severe duty badass belt"

Nice that the second champion and that a turtle can take the time to do a great belt test awesome guys keep the video’s coming that belt will be real nice when you get that big turbo hopefully it holds up well then too

Any updates on this belt? How many miles do you now have on this belt. thanks

With all the talk of blowing belts, I’ll buy the Talon

Bought one! Thank you!

That belt looks like the real deal 👍👍 curious if it'll cause any extra damage when it does blow? Gotta get one either way, thanks for the info FTO! 🍻🍻

I looked around and couldn't find a video of you removing the secondary from the vehicle, do u have one?

Really nice 🤟 is it really better than the oem ?

I just put out an APB on you boys.

I wish u guys would test a Hunter Works belts . Also would this belt G-BOOST stop the jerky starts on the Polaris RZRs?

I'm sold! Great vid guys an thanks.

Great video

Getting mine next week thanks

I'm predicting 8 laps, maybe 8 1/2 ( have not FF's the video, zero cheating. Will post again when the video is over.

Kinda curious if differences in weather elements will cause change either.... wet weather or cold weather or water holes or snow, mud ?

There once was an Aaron Shae that played tight end for the Browns, Interesting

Thanks for the test! Should I get my clutches worked on with this new belt? 2019 DS Turbo R.

I watch the full videos.. cant miss out on dozer backhanded comments.. lol

If you're belt get stretched out and old can it cause you're wheeler 2 lose power ?

you two are crazy keep going greetings from puerto rico

I bought one and put it on my x3 with 194 miles. Blew it 40 miles later. Not sure what going on

What's the difference between the bad ass belt and worlds best belt. Cant find the best belt on you wed page just the bad ass belt. I have a 19 can am x3.

Pretty impressive!! How many laps?

What model number is that belt

Did you break in the belt or Just started ripping it?

What is the difference between the g boost worlds best and the evp badass belt?

can you test a Hunterworks belt?

3( glad to see im wrong)

really freaking good vidéo 👌

What type of temp gauge is that where did you get it?

Wonder how these will do in mud and water compared to the HighLifter C-3 belt they make for mud

Where can I get on for my 2020 rzr xp turbo

I just bought this belt for my new 19 with only 40 miles on it. I haven’t even received it yet much less installed it. I have seen a few reports of them wearing grooves in the clutch faces. Have you heard any reports of thi?

Does anyone know what is the usual temperature for your average belt? And also at what temperature does it normally snap?

Why am I watching this...

Is this for sport only or can I get this for Polaris general 1000?

It would be cool if you could try it out at some Sandune‘s

You should do a 0 to 60 comparison with a worlds best VS a EVO . Like you did with the old vs new 2 months ago. Im curious to see if there is a difference maybe because of tension🤔

Links for the belt aren't working. I'm only finding the bad ass belt, no gbelt

so do they make this belt for the xmr 1000r outlander 2019?

all belts can do what you did in this video .... if you really want to test the strength of this belt then you have to hit the road with 130km/h this is how i broke my first belt

how many miles do you guys have on your x3's? have either of yours had the front output shaft seal leak and driveline vibration? I just got my x3 xrs about 2 month ago and already have a leak and the driveline vibrates so bad after 55 mph I have to let off. I am very disappointed so far with this machine. It has also gone in to limp mode twice out of nowhere and one of the front fox shocks is already leaking. I bought the x3 because it seemed like they could really take some abuse for the most part. Sorry to rant but I am only asking because you guys really use your machines and I never hear you talk about any problems.

Im sold!!! Thanks guys 💪👍