Is Your Firestop Collar Installed Properly?

Подписаться 5 тыс.

Просмотров 9 тыс.

50% 1

Firestop collars are meant to maintain the integrity of fire walls, but proper installation is vital. See how a firestop collar performs when it's not installed correctly.
Structure Tech's firestop collar video.
• Not a flamethrower tes...
Products mentioned. If you purchase from the links below, we earn a commission.
LCI300 Fire Stop 10.1 Oz Tube Intumescent - amzn.to/3iPMkpx
Sti Pipe Collar, 4 in, for Plastic Pipe - amzn.to/36dbhWw
Sign up for our hands-on radon mitigation course at the link below.
americanradonmitigation.com/c...
Get an estimate (within an hour of the Twin Cities, MN metro area)
americanradonmitigation.com/f... or call 612-474-1004
If you live outside our service area, check out our virtual consulting services at americanradonmitigation.com/c...
For basic questions, leave a comment, and we'll try to answer when we have the chance.
Thank you so much for watching!
Frequently used products. If you purchase from the links below, we earn a commission.
Ecosense Radon Monitors: Use promo code ARM to receive a discount ecosense.io/ARM
Fantech Radon Fans. Promo code JESSE to get 5% off your first order. radonpds.com/product-category...
TEC DG-8: store.energyconservatory.com/...
TEC Fog Puffer: store.energyconservatory.com/...
Radon Sealant - amzn.to/2Mu6yZv
Milwaukee Super Hawg Drill - amzn.to/32m67sk
Milwaukee 16’ Autolock Tape Measure - amzn.to/3ouZFXQ
Bosch 5-Inch Core Bit - amzn.to/36ik4Xw

Опубликовано:

30 ноя 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 14

@travislivengood7443 Месяц назад

Quick addendum, you want to tool the firestop product before installing the collar. This does a list of things that work in your favor. 1. Promotes bond to substrate 2. promotes proper 1/2 depth of seal 3. tools out air pockets 4. Makes for a cleaner install 5. Is required for any and all UL assemblies to be a complete installation.

@AmericanRadonMitigation Месяц назад

Thanks for the tip! Could you leave a link to the resource if you have it?

@gobindabaidya2372 6 месяцев назад

This work doing three years 2017 to 2020 Dubai. Very good work .i have full experience this work. I am Indian but my full knowledge this work. This work name pvc pipe collar seting. This use pvc pipe, collar, rape cp648e and hilti silicon fs1.

@hammerhayllc Год назад

Nice video J! I like the FIRE video 🔥🔥🔥

@AmericanRadonMitigation Год назад

Awe, thanks, Paul! 😉

@halilcankaya3202 9 месяцев назад

Hi, ı have a question. İf ı install circular 0.5 mm thickness sheet metal duct with standart mortar what do you think its is safe to install fire damper (espacialy butterfly tipe) inside the duct and 150 mm wall?

@halilcankaya3202 9 месяцев назад

wall material is aerated concrate 500 kg/m3

@AmericanRadonMitigation 9 месяцев назад

I am not sure. I'd reach out to a company that manufactures or sells fire-stop equipment.

@bosssauceiym 17 дней назад

Nice video. I feel like this test was not 100% For a complete test. the fire should be lit in a box, and the fire and smoke should have nowhere to go but through the gaps. Leave holes to feed the fire with oxygen, but the fire should have enough enclosed space to force itself through the gaps and generate heat buildup around the collar.

@bosssauceiym 17 дней назад

Simulate a small room with pipe running through it and light the fire inside the room and see how that works out.

@AmericanRadonMitigation 16 дней назад

I'd be happy to if you build it!

@mikecayen8580 Год назад

Heya, great video for concepts but... Firestop doesn't belong in homes, only multi-tenant buildings with actual fire rated floors and walls built with intent to stop fire. Your typical "garage" drywall wall use home 1/2" board wouldn't stand a chance for more than a few minutes in a raging garage fire. A fire in a typical room gets well over 1000 degrees F in under 5 minutes, and continues to rise from there, whereas in your short test, with much lower temperatures in an open air environment, the lower part of your drywall simply "disappeared". Firestop drywall is 5/8" Type X and while it is far from invulnerable, 1 sheets on either side installed of a stud will actually last for one hour, not minutes. Just be careful not to pitch firestop for single owner homes as it will absolutely fail to help due too wall disintegration...

@AmericanRadonMitigation Год назад

Hey Mike, thanks for the info. How do you suggest complying with section 6.2.10 of the mitigation standards? standards.aarst.org/SGM-SF-2023/22/index.html#zoom=z

@mikecayen8580 Год назад

@@AmericanRadonMitigation Hey, difficult to say, I believe you are working under US code so I can't comment on specifics but standards that a non-profit like the AARST develop to assist its members won't necessarily fully align with your IBC national building code. That reference you link does simply say to "observe codes", which in the case of homes is simply to apply "smoke block" (not firestop) at all floor penetration locations (usually through the bottom stud of a wall), and I'm not sure how the IBC applies to wall penetrations in a house either. Smoke block simply buys some time by not letting smoke race up to upper floors through all of the openings created for electrical and plumbing as soon a crappy 1/2" house drywall board fails and explodes off of the studs. But there are thousands of firestop systems tested by UL and Intertek for example, while there are exactly ZERO systems tested for single family dwellings as the construction materials won't hold up for an hour anyway ;).