It’s Out! RV Slideout Removal and Repair. It’s Not Good News.

Подписаться 9 тыс.

Просмотров 105 тыс.

50% 1

It’s out! ..... Yes. The slideout is out! Ok finally making some good progress on the truck camper repairs. It’s not good news though. I’m also finding more things to be repaired. That’s ok.... I’m tearing into the walls to repair the frame but finding more rotten luan plywood and broken welds in the aluminum frame.
Tearing into the truck camper to repair some aluminum frame damage caused by years of road stress. The slide out supports have broken away from the main frame so it’s time to dig in and look at what needs to be done to repair and Rebuild the RV to make it stronger. We will be remodeling the entire interior (and possibly the exterior) of the truck camper while we have it apart.
Tools for RV Repair
Propane Gas Pressure Test Kit (Manometer): amzn.to/2Y1j1ER
Digital Clamp Meter: amzn.to/2DEFiAh
Polarity Tester: amzn.to/2UQ1Dk7
6-Way Screwdriver Set: amzn.to/2DCgjO8
Digital Monitor for Line Voltage: amzn.to/2ZHVsm9
Caulking Gun: amzn.to/2IQbXqP
Automotive Style Fuses: amzn.to/2GTfTF1
Assorted Electrical Connectors: amzn.to/2XZp5xv
and amzn.to/2ZUN9DA
Silicone Spray Lubricant: amzn.to/2ISpRsG
Assorted Zip Ties: amzn.to/2DF48Aa
Food Grade Thermometer & Temperature Gun: amzn.to/2ZNVkBE
Wire Cutters: amzn.to/2UOHew6
Klein Tool Wire Stripper: amzn.to/2UPHYAM

Опубликовано:

16 авг 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 70

@danamiller731 4 года назад

Good video,Thanks. I am taking my slide out "Out" on my 38 ft. Kuntry Aire 5th wheel and going to put a door maybe a sliding patio door out to a deck. So your video was helpful. Thanks again.

@alpine8525 5 лет назад

Kudos to you! Im gaining alot of knowledge from your videos. Good luck!

@randpamadventures8374 5 лет назад

Wow what a project, great work 👍

@irapickard6775 5 лет назад

To do what you are doing is amazing. I can tell you are not intimidated by anything.

@covetthecamper2289 5 лет назад

Thanks! I appreciate the kind words. The really amazing thing will be if it goes back together! 😉

@irapickard6775 5 лет назад

From what I have seen in past videos and the the things you have built your are a craftsman. When finished it will be completely different than the original. More durable. You should seriously contemplate building a camper from scratch.

@tecknopopoff 3 года назад

Thanks for the insight

@tommychong9735 2 года назад

Thank you so much for uploading Great video. I might have to do the same work pretty soon

@covetthecamper2289 2 года назад

You’re welcome. It’s a lot of work but we’ll worth the effort.

@covetthecamper2289 5 лет назад

Repairing aluminum frame damage in the slideout corners caused by the garbage roads we have here in the good ole USA. I-40 in CA, AZ, NM, many Texas state Hwy around Amarillo, Wichita Falls and Dallas. While tearing into the camper to make the repairs I found (not surprising) wood rot from years of water leaks on and around the slideout. I’m replacing everything with waterproof and rot resistant composite materials. I’ll re-weld and bracket all four of the slideout opening corners. Reseal all exterior joints. Replace all hardware fasteners and coat each with anti-corrosion paste.

@jasonhinson3812 3 года назад

Very brave man😂🤣

@sbtoolman12123 2 года назад

That is one OLD unit, holy cow i have not seen that style of unit in a very long time!

@yourfulltimervliving9414 5 лет назад

It looks like it has been a real project for you so far Jeff, but as you suspected. Press on . . .

@covetthecamper2289 5 лет назад

Yep. Very interesting and kind-of fun tearing into the camper. The rebuild and remodel has started so more videos to come!

@fahey6797 2 года назад

I purchased a truck camper last year and I chose the Lance 850. I didn't want any model with a slide-out. Between eventual leaking and potential mechanical problems with the mechanism, I didn't want to deal with headaches down the road. (pun intended)

@ronron6211 5 лет назад

I have the same camper. Got it a few years ago to replace my 5th wheel. I really wanted a Bigfoot but got this in great shape for $3000 in so Cal. After watching your videos and knowing how cheaply they are made, I'm kinda wishing I waited for the Bigfoot. Oh well....I do love my camper nonetheless. Thanks for posting.

@covetthecamper2289 5 лет назад

They are made relatively poorly compared to Bigfoot or Northern Lite campers. You got a good deal at $3K. I’ve seen a few around California for $8-12K.

@ronron6211 5 лет назад

@@covetthecamper2289 Do you have a generator? If so, where do you store it. Costco has a nice Yamaha 2000 watts for $400. Tired of lugging around a larger Champion 4000.

@covetthecamper2289 5 лет назад

Ron Stiff I have a portable inverter gen. Sits on the front hitch rack when I need it. RV shore power plug reaches.

@freetoroam7769 3 года назад

I went from a Lance to a Bigfoot two years ago, and there's no going back. The Bigfoot is built so much better. I expect this to be the last camper I'll ever need.

@deborahsmith9232 4 года назад

Omg finally a rv gut. Looking to remove bunk beds and convert to closet ant advice?

@Craig2760 3 года назад

Looking at a used camper on Craigslist ; “in great shape, slide out could use some work”. After watching your video, we’re passing on it.

@covetthecamper2289 3 года назад

There are many possible issues with a slide room. Most are minor adjustments. Some require extensive repair.

@gpauloj7 3 года назад

Hi from france, sorry for my frenchglish, I travelled south america with my defender 130 and a nice camper on it, but I want to build my own but with slide outs, my biggest problem is to get sure about no water infiltrations, maybe you know a youtube channel where i can see how to do a slide out from a to z, Thanks

@laurieforsyth8643 Год назад

i dont have the option of a man fixing ours. how much is it going to cost to have someone do it for me? thank you.

@covetthecamper2289 Год назад

It really depends on what needs to be repaired and the $/hr rate of the shop or mobile tech.

@xlr8bmt 2 года назад

We're on our way to do this as well. March 2022

@covetthecamper2289 2 года назад

Nice. Good luck to you. It was an experience. Camper is still working great though. I’m glad that I spent the time to repair and remodel it. Thanks for watching.

@mjmohn 5 лет назад

Conducting the autopsy on the truck camper. Interesting. While there are many different "classes" of RV's (A,B,C and so on), there are actually only two "types" of RV's. Those two are ... Those that leak, and those that are going to leak. Use marine grade plywood and marine grade hardware on the rebuild. We did when we addressed similar issues. We look at the TC as a "boat" and now we are sure the TC won't sink in the future from water damage. There is no doubt you will have a "built right" truck camper when complete. Good luck

@covetthecamper2289 5 лет назад

You got that right. They will all have damage at some point. It’s no different than owning a sticks & bricks house. Maintenance is key. I’m using all composite materials for their lightweight and water/rot resistance properties. Still a lot left to do. Just taking small bites and taking my time chewing.

@rax7111 5 лет назад

Covet the Camper - I agree on composites. I wouldn’t put any wood/plywood back into the structure.

@brianhopkins6657 10 месяцев назад

I have a camper slideout that has water damage and will need to be removed, how is the slideout attached to electric track or do you have info on this.

@kevinjhonson5925 5 лет назад

I look at travel trailers as 6 year purchases after that dump it. They are all junk. Hats of to you doing all this work

@ronron6211 4 года назад

Love your vids! Do you have one on adjusting the slide? Mine has about an inch gap on the top. Thanks

@covetthecamper2289 4 года назад

Thanks! I’ll have a video coming soon on the installation of my newly rebuilt slideout which includes all of the adjustment methods.

@covetthecamper2289 4 года назад

Are you using the road lock dowels? A lot of these rack & pinion style slideouts require the use of road-lock dowels to close properly. It really becomes noticeable after wear&tear on the slideout frame.

@ronron6211 4 года назад

@@covetthecamper2289 I haven't used it because it seems previous owner opened slide with it in and damaged the outside. Should I force it closed and use dowel or would this cause more problems? I have fixed the outside damage. Can I use dowel anywhere along top of slide? Thanks again

@rax7111 5 лет назад

Steel screws may be reacting to the aluminum trim. Galvanic reaction??

@covetthecamper2289 5 лет назад

Possibly. Am using Tef-Gel on all of the new fasteners.

@wdeadfan 2 года назад

Did you actually finish this project? If you did, you are my new hero 🤣🤣🤣

@covetthecamper2289 2 года назад

Yep finished the full rebuild of the Slideout, frame repair and a nice remodel of the interior last year. Still working great. There’s videos of the whole deal here on my channel including the final reveal video. Truck Camper Rebuild & Remodel is Finished! Structural & Cosmetic ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_VrR8wcQnP0.html

@brettallenthomas 2 года назад

That's the most overbuild slide-out platform ever.. you could probably support the whole camper on that structure...

@covetthecamper2289 2 года назад

Yep. I built it to support the weight of a few people and the Slideout room as I was unsure if I could pull everything by myself. The slide room and mechanism was only a couple hundred pounds.

@outdoorswithlarryrobin 5 лет назад

Curious about the rot, my 2006 Lance 851 with sidewall slide is supposed to be the first all aluminum frame work! What year is your unit? Bold Repair!👍🏼

@covetthecamper2289 5 лет назад

Lance campers started constructing some of the higher-end campers with aluminum frames in 1998 for the 1999 model year. Mine is a 2003 Fleetwood Elkhorn

@covetthecamper2289 5 лет назад

Lance started using Azdel composite substrate in place of the garbage Luan plywood in 2006. That’s a very nice camper.

@christinalouallen9757 4 года назад

So did you work on it with it slid in or out bc I've gotta do the same thang to mine

@covetthecamper2289 3 года назад

Pulled the Slideout. Rebuilt the entire box, camper shoulder, side skirt and remodeled the interior. Videos on all of the work here on my channel.

@christinalouallen9757 3 года назад

@@covetthecamper2289 thank you

@tegan007 Год назад

HI i am wondering could someone just remove it and then put wood and insulation and make a wall where it use to be if you didn't want the slide out anymore?

@covetthecamper2289 Год назад

I’m sure it could be done. The outside wall on my slideout detaches from the slideout box. (Already has the windows and storage compartment doors) that could be permanently attached to the rv sidewall and sealed. On mine, the Slideout floor is raised and the mechanism (rack, motor, gears etc) are all mounted underneath along with wiring & LP gas line to furnace. A new raised floor above the subfloor could be constructed to cover/protect those lines and wires.

@Abeaness 3 года назад

What is you do at Fleetwood? This sort of stuff (building campers?)

@covetthecamper2289 3 года назад

I worked on the assembly line building Class C Motorhomes. I worked in various departments like windows and doors, carpet and cabinets installation, fiberglass caps and exterior lights etc.

@Abeaness 3 года назад

👍😀That foundational knowledge and experience comes in handy (although not exactly with the slides which apparently were more common after your time there - as noted) - but- it has to be a bit less intimidating when you work on such repair projects, I would think!) Thanks so much for these videos, as it truly helps inform/educate those of us with far less knowledge and experience with this sort of RV stuff!)

@rockygoomba3223 5 лет назад

Slide outs are not worth the trouble.

@sarmce 5 лет назад

So what happened

@covetthecamper2289 5 лет назад

Repairing aluminum frame damage in the slideout corners caused by the garbage roads we have here in the good ole USA. I-40 in AZ in several places, many Texas state Hwy around Amarillo, Wichita Falls and Dallas. While tearing into the camper to make the repairs I found (not surprising) wood rot from years of water leaks on and around the slideout. I’m replacing everything with waterproof and rot resistant composite materials. I’ll re-weld and bracket all four of the slideout opening corners. Reseal all exterior joints. Replace all hardware fasteners and coat each with anti-corrosion paste.

@sarmce 5 лет назад

Wow I have a 2001 forst river its licing in The fornt overhang I tried everything to find it and no luck

@covetthecamper2289 5 лет назад

Did you inspect the seals and lenses on your clearance lights? These are overlooked often.

@sarmce 5 лет назад

I think it's the light I as took the window out it and it slow down

@covetthecamper2289 5 лет назад

I had the same issue. I replaced all five lights and lenses with the led style and resealed everything a couple years ago. It’s dry up there but the damage was done. I’ll be replacing the front cap with all composite materials.

@codycairns3564 Год назад

There's no easy fix. They aren't built to be repaired easily.

@covetthecamper2289 Год назад

Yep. I worked at a Fleetwood Factory building Class C motorhomes on the assembly line for just about 10 years. It’s not impossible to repair, but not easy. When I did this rebuild a couple of years ago, I had to get creative with materials and methods.