It's here!  

What’s that sweater?! Been getting that same question for 24h so have to pin it! The sweater is from the lovely folks at Team Dream! (Not affiliated) teamdreambicyclingteam.com Go and show them some love 🙌

This mans intro is so good it makes me think it was a trek ad

One of the best looking colour ways in the entire Emonda line up. A man of culture and good taste. Well done!

That intro was art.

„There‘s my taste, and there‘s the wrong taste.“ 😂🏆

OOOHHH i'm on the video with my Festka Scalatore comment! Made my day!!

It's addicting to build your own bike. No wonder you don't have a "forever" bike. I hope you find your one and only.

I was really curious why the Emonda was chosen over other frames on the market. Thank you for sharing it and enjoy that new ride. Nothing like new bike day... though new wheel day is pretty good... So is new extra lite bottle cage day to I guess haha

Oh what a pleasant surprise to see my bikegeocalc webhack being used by my favourite bike youtuber :-). Regarding tire clearance, I have noted that the same bike model in different sizes can have different tire clearance, if the chainstays is the narrowest point (which it often is). I have a Cannondale CAADX size 54, and my brother has the exact same model in size 51. His frame actually has a couple of millimeters more tire clearance than mine, despite the smaller size. The reason being how the chainstays are shaped, his size has a bit shorter chainstays and therefore wider opening near the bottom bracket. So if one is pushing the tire clearance limit and researching on the internet what people get into their bikes it could be worthwhile to check which frame size they are using too, at least if the chainstays are the limit. The fork should be exactly the same, and I think that seatstays are usually less variable than chainstays between frame sizes. Another thing about chainstay limit is that they are usually slightly asymmetric with less space on the drive side. So in one of my bikes where I have pushed the limit I have actually dished the rear wheel 1 mm to the left, which is small enough to not be noticable in handling, but may give you that crucial extra mm, so I got 3mm clearance on both sides rather than 4 + 2mm, which does make a small difference if it is a bit muddy or if you get a spoke failure. I also consider it much safer to push the limit in the rear wheel than in the front wheel, as a dragging wheel in the rear after a spoke failure is much less likely to cause a crash than the same thing in the front wheel.

Trek is one of my favourite mainstream brands. The bontrager stuff is also pretty nice.

the trek emonda with the mindblowing klein paintjob - it is a supernice!

Love the color on that Emonda!

cant wait for the built bike....

“There’s my taste, then there’s the wrong taste”...gold. Gorgeous frame and zen reasoning, look forward to the build👍

That is an absolutely beautiful color and I can’t wait to see it in the sunlight. Thanks for sharing 🍻

I love your videos and am excited for your new project (for both our sakes!). That paint job is beautiful. So happy for you. YOLO!

Beautiful job on the Trek and thanks so much for the fitting site recommendations!

Dude just two damn thumbs up 🤘🏻🤓

gorgeous color shift

Looking forward to your next video bro!

It’s a beauty, can’t wait to see the build up!

Looks beautiful, can’t wait to meet it!

Thank you for sharing! 🤩

What a beauty! Congrats!

Congrats on the new frame!!

Nice frame! Can't wait to see the final build. Good luck!

Awesome. Congrats!

Always a fan of your content, great video!

Great Choice Tobias! Can't wait for the build vid. Stay healthy! Have a great Christmas and a happy new year!

I was more excited about this than for Christmas!

This video is a good start for the holiday season!

looking forward for the build...Cheers!

I think we all need an Emonda SLR was coming, but WOW that looks amazing!

Congratz on your new frame! It looks awesome and can't wait to see it built up in your upcoming videos!

Yeeehaaa! What an awesome color!

Deeply enjoy your videos. Keep it up, Sir!

The lovely irony for me is I just took delivery of a [matt grey] Open U.P. frame and am feeling blessed + excited about building a x1 GRX Di2 / 650B bike in large part inspired by RoJ and already have x2 Treks (a 2014 Madone and 2017 Domane] - heading back to review some of you awesome vids from 1-2 years ago...Happy Riding in 2021

thing of beauty!

Thanks for the honest no bs material!

Brilliant frame, very excited to see the full build. Really fantastic info on the geometry comparison sites as well, thank you!

That paintjob is looking sick! Looking forward to the build video

Cinematography 🔥🔥

Nice Frameset. Love the paintjob 😍

sliiiiickkkk bike! looking forward to seeing what you're going to do with it!

I love how well thought out your choices are. Thanks for sharing all the details, and pertinent information. Your new steed is going to be sensational, congratulations!

Beautiful colour!

I think the frame is really pretty! Great video!

Totally understand the 2nd minute of this video. Just ordered a Project One mountain bike. LOL

Dude, you killed it on the intro shots.

Very beautiful frameset, congrats and peace ✌️

Gorgeous colour and intro video! Thanks for the shout out :)

Amazing intro and video as always

wow - nice colour,look forward to the build. My Mason Bokeh frame arrived yesterday, hoping to start its build over the festive break as various parts are starting to arrive.

One of the few channels I subscribe to. Genuinely enjoy this content.

Love the colour(s)! It's exactly what I would choose for myself.

Top tips on the geometry websites!!!

Wow Trek... I did not see that coming! Looking forward to the build out!

Wow that paint job 😮

Great intro!

Ive ordered the slr with exactly the same reasoning you did. You're a legend 🙌

I really want to see it complete, really nice bike!!!!!!

Nice looking cykelram!

Beautiful Emonda SLR. I have it too and it is my favorite bike to ride!

Gawddammit, you are again killing it with intro cinematography 😍 Honestly, I don’t really appreciate your choice but I wish you best of luck and much fun with the upcoming build. Cheers!

Its beautiful.

That frame looks from the future, congratulations! Btw that green jumper looks lit too

Nice! I guess I have exquisite taste! :) that trek color way is so cool! And that into was lit!

Love it

Awesome bike. Enjoy the build! I just completed building a 6.8kg Trek Crockett cyclocross race bike. Took some of your advise on parts.

Nice frame! Congrats

Ahh to be amongst fellow suffers of OCD. I feel almost normal when I watch your videos. Great videos man!!!

Not a much a fan of the Trek line-up personally, but that's one juicy paint job. 100% agree that it is the most important part of the bike. Can't be shiny enough.

Nice colour 👌

Love your content, really good an entertaining. Keep it up! Halfway through you video I was think "I wonder what parts will he put in the frame...." Then I I saw the links to the other video. Gotta go watch now!

Awesome bike it’s going to be sweet !

Happy happy early christmas!!

Hello. I do not subscribe or comment on RU-vid videos but I just wanted to say that your intro was absolutely beautiful. I replayed the intro multiple times before watching the video, then once finished I watched the intro once more.. You are very deserving of that colorway! I have a Giant Trance with a Blue Chamelon colorway and it's dangerous, it's a real neck turner!

Is it weird that Christmas is in a few days and waiting for this video is all I could think about!?

Great opening video showcasing the frame. Pro level 👍 Love the colour choice. While aethos may be lighter, definitely can’t go wrong with Emonda. Look forward to the fully built up bike. Enjoy the process!

Never felt an attraction to a bike before, but I have to say that opening scene had me going.

Just wanted to say thanks. Your videos are helpful and enjoyable to watch - well done in every way.

Really taken the camera work to the next level. Pro grade intro!

I can understand waiting for a custom frame can suck, but getting a custom frame in the mail after months of waiting that is built to your exact specifications is one of the best feelings in the world. Riding a bike that is uniquely for you and that no one else has is great too :)

You’ve inspired me again. I’m ordering a custom frame tomorrow.

Beeeeaaauuutiful colour, my friend. Now the big question is....do you need to buy new kit to match? Excellent choice. Can’t wait to see the big smile on your face after the first ride. 😉👍

Great choice ! Nice bike, exept for the seatpost. I am most interested in how the stem & headset are going to look. Some of these new bike with semi- integrated cabling really have a complicated construction ! Good luck, thanks for sharing.... AND,,, merry christmas !

Cool frame 👍👍

Welcome to team E’monda!

As a Trek Emonda owner with almost this same paint job, I approve! My Emonda has the Emerald Iris color which is similar.

You have a great taste!

Love the chubby bobcat sweatshirt! Team Dream Team! The Emonda looks hot! I ride a heavy Domane! :)

Wohoo new Video is out 🙌🏻

wow the intros is amazing

Good choice!

Great looking frame colour and the new T47 BB is meant to be robust. Looking forward to seeing it built.👍

Diggin that team dream sweatshirt! Nice bike too :)

Trek purple flip 🔥🔥🔥 love it on my ALR

nice! Looking forward to the build video(s). Peace!

get a "seatpost" from english cycles custom made realy thin with a braze on clamp it looks so clean. Or maby berk can make you some custom magic carbon post.

It is here!!!