Jag Arms Scattergun Review. 

It just screws in! The gas valve screws out and this goes right in, I did wrap it with some Teflon tape but I don’t think it was necessary.

@@Chloride37 what thread was on the tap you used on the ts version

@@jacksonmurphy5598 standard Jag pattern cqb Russian tap. Got it from evike I believe or Airsoft Atlanta, been awhile lol

Yeah man I noticed about the same thing. Long distances just don’t work well, even if you can lob them they hit like a butterfly fart and most folks don’t even notice them. But short to medium range and it’s golden!

@@Chloride37 butterfly fart... Well spoken bro 🤣

chzbrgla.rides lol feel free to use that sometime!

So the a better hpa increases the distances for shotgun airsofts. That's the common part for the job??

Yeah but on the reaper I did have to open up the hole around the gas valve a little. the hpa tap wouldn’t quite fit far enough into the wood handle on the reaper. Not hard just took a little time with a dremel and a sanding wheel

@@Chloride37 I'm buying the TS off a buddy of mine I'm sorry I should of said which one I was getting

No the reaper tap went on very easily, the super cqb was a pain tho.

its got a QD slot on the bottom of the grip, you can add anything you want to it really. A 1 point works really good with the little one tho, hangs at your side under/near your arm.

BloodRedMoose Isn’t short awesome, thanks for the comment! Contest on my 50 subscriber video so feel free to enter too!!!

jesse depends on what part you in really. Cedar Creek is my go to, it’s central NC (mocksville). There’s Gunnys out near Charlotte, Black Ops in Fayetteville, XK in Durham, Southfield in Jacksonville.

@@Chloride37 Thanks, I'll look into Cedar Creek sense in im the Greensboro area.

Yeah bud no problem! The Creek is a great field and the owners maintain it very well. Really enjoy playing there! Lmk when you decide to go, might be able to team up! Also check out our Facebook group: North Carolina Airsoft Community! Lot of local players in there and loads of good conversation!

I am working on fixing my guns and gear but I will definitely send you a message if I go. I also just filled out the form to join the North Carolina Airsoft Community Facebook group!

To be honest I'm not familiar with them. Looking at them and some reviews they look exactly like a Jag so I bet they are solid! Probably made by the same factory using the same parts but I don't know that for sure. Let me know how you like it and how it treats you!

Unscrew gas valve. Wrap CQB Russian Jag tap threads with a little Teflon tape. Screw it in and tighten with a wrench. Took about 2 minutes

@@Chloride37 alright, thank you!

Nope, cqb Russian tap slid right in. I used a little plumbers tape on the threads and an adjustable wrench to tighten it. Fit good and no leaks

Thanks

Nope just grabbed an oring kit off amazon and put one that fit on. No idea which one it was and ive since traded the gun so I cant check it.

@@Chloride37 👍 gonna get that gbb saiga tm just announced?

@@shockwave.9749 Dang that thing is awesome for sure! Id like to but idk. Real life is putting its foot down and my airsoft time is suffering pretty hard. Hope to get back into it soon tho!

@@Chloride37 yea I hear that, plus the expected price is 6-800$ 🤢🤮

@@Chloride37 I'm more so trying to decide between a TM AKM gbbr, TM MK18gbbr, or the ngrs mp5

If you order one new its a Gen 2, if you buy one used its probably a Gen 2. Gen 1s had bad valves and leaked like crazy, but they didnt make a ton of them. You probably wont come across one in the wild since they usually wound up in trash cans.

@@Chloride37 Nice thanks man, I got mine. I really like it, the issues I think they fixed on gen 2s. However my complaint is the shell doesn't fall out like other videos have shown. It takes me a little effort to remove them. Do you happen to know of a pistol and sniper you would recommend? I want a more dmr sniper and the pistol I really like is a John Wick JAG arms pistol. The shotgun really makes me want to keep going for JAG. The sniper I'm looking at is Amoeba as02 striker.

@@WitchDoctor87 the chamber of mine were a little stiff at first, using them for awhile broke them in and the shells drop free easily now. AS02 are pretty fun but they wouldnt be my go to choice for a true sniper but they are fun to play with! Ive had 2 and enjoyed both, not enough to keep tho. The Jag hi capas are a good out of the box shooter. If you want to customize it at any point youre better off going TM Hi capa since parts are easy to find and fitment is 100%.

@@Chloride37 Thanks, yeah I looked into JAG hi capa because I guess they're compatible with TM hi capas. I also h3ar really good things about the triggers on JAG arms combat masters hi capas.

@@Chloride37 I'm returning after a month of play with this thing. I did get a Gen 2 brand new. I bought a a&k Lmg full metal and a KWA M4. I can honestly say I like my jag arms shotty the most. The shotgun I got is the same as your longer one. I'm getting a Primary airsoft m4 adapter for it and I'm debating on hpa tapping it. On the adapter I'm debating on a 200rd m4 mag or a drum m4 mag because my lmg could be nice with a drum mag and the shotty with a drum mag could be a good suppress support weapon with quick strokes. I've had no issues at all. No loose parts no leaks, the simplistic design of the shotgun sells ot very much for me. I'm a guy who loves reliability over all. I want things to be consistent and do what I want. This shotgun does that and with a great feel on pop offs.