Japanese Tool Haul and Review: Makita, Anex, VESSEL, SK11, OLFA, KOKUYO, GranGear

Подписаться 17 тыс.

Просмотров 49 тыс.

50% 1

linktr.ee/bzeug for Instagram, Amazon store and more
www.amazon.com... I earn on Amazon affiliate links.
Blackship referral link: blackship.com/...
Amazon Japan Affiliate Links Below:
KOKUYO Scissors: amzn.to/3GoqmGM
SK11 Bit joint: amzn.to/3N7Ukm5
SK11 magnetic screwdriver holder: amzn.to/47xFgq7
VESSEL Black Laser Bits: amzn.to/3sOYSa6
VESSEL Hex ball driver in various sizes: amzn.to/3uAVm3r
VESSEL Hex driver 1.5mm: amzn.to/47C8S5v
VESSEL Hex driver 2mm: amzn.to/46Il1o5
VESSEL micro screwdriver set: amzn.to/46StUvL
VESSEL green bit holder: amzn.to/3R5cQfM
ANEX Luminous Stainless Plus Screwdriver: amzn.to/3T4oMkF
ANEX Luminous Stainless Minus Screwdriver: amzn.to/3R0qsZY
ANEX Luminous Stainless Minus Stubby Screwdriver: amzn.to/410lUY0
ANEX Luminous Stainless Plus Stubby Screwdriver: amzn.to/3R0xFZW
ANEX 395-D ratcheting screwdriver: amzn.to/47VsX6x
Anex large stubby: amzn.to/47ThTab
ANEX GranGear green insulated screwdriver: amzn.to/3N5LchO
ANEX GranGear tan insulated screwdriver: amzn.to/3Rnnwbl
ANEX mini hammer: amzn.to/3GlAzn5
OLFA WORKS Camping knife: amzn.to/49Z0z5m
OLFA WORKS Field Saw: amzn.to/47UZzgR
Makita filter holder: amzn.to/47Xl8x8
Makita filters: amzn.to/3Rlru3U
Makita black pen impact: amzn.to/3GnO7yz
Makita pen driver (non impact type): amzn.to/3N6ho4K
BOSCH bit set: amzn.to/3uDPk2a
Makita Pen Driver Various on Amazon Japan: amzn.to/3T2Tdb2
Makita Pen Driver Non-Impact BLACK: amzn.to/47W3bPF
Makita Pen Driver Non-Impact TEAL on Amazon USA: amzn.to/4176BN9
Makita Pen Driver Non-Impact BLACK on Amazon Japan: amzn.to/3uOdiHP
Makita Pen Driver Impact TEAL on Amazon USA: amzn.to/49ZCn2J
Makita Pen Driver Impact Olive on Amazon Japan: amzn.to/3RrKY7k
Makita Pen Driver Impact Black on Amazon Japan: amzn.to/3uJTqpy
Makita A-44627 BIT PEICE: amzn.to/3V6wPMa
Makita TD002G PURPLE: amzn.to/44IO9vi
Makita TD002G OLIVE: amzn.to/452Os48
Makita TD002G YELLOW: amzn.to/3rKbiPu
Makita TD002G BLUE (Teal): amzn.to/3rIo4y6
Makita TD002G BLACK: amzn.to/3q3z9co
Makita TD001G tool only and choice of colors: amzn.to/3tTu2tP
Makita TD002G Blue tool only: amzn.to/3AD1V5R
Makita TD002G Purple with batteries, charger and case: amzn.to/3VhJGeg
Makita TD002G Yellow with batteries, charger and case: amzn.to/3Vti6L3
Makita TD002G Black with batteries, charger and case: amzn.to/3GDMHBo
Makita TD002G Olive with batteries, charger and case: amzn.to/3id1wAv
Makita 40V MAX XGT USB Power Adapter in Olive color: amzn.to/3AHwaIP
Makita 40V MAX XGT Light with USB in Olive color: amzn.to/3EZ0tNy
Makita 40V MAX XGT Air Duster: amzn.to/3EZ0ykk
Makita 40V MAX XGT 125mm Circular Saw: amzn.to/3EA9ift
Makita 125mm blade: amzn.to/3VtiyJf
PROCHI (JAPAN): amzn.to/3IR4AKx
FIX IT STICKS (USA): amzn.to/3qQXwak
FIX IT STICKS (JAPAN): amzn.to/35wfckk
ANEX torque limiters (JAPAN): amzn.to/3iQYYVV
VESSEL Prokon Sakisubo bits: amzn.to/3ThWKQD
VESSEL Prokon Sakisubo Double Ended bits: amzn.to/3ccHjs7
VESSEL Prokon TORX: amzn.to/3PEmCmr
VESSEL Prokon HEX bits: amzn.to/3R3gQfr
VESSEL Prokon combi blade set with ball grip handle: amzn.to/3wjSENS
VESSEL Magnum (Blue) double ended bits: amzn.to/3c9RUE9
VESSEL Magnum (Red) bits: amzn.to/3dNdoY1
VESSEL Black Laser bits: amzn.to/3pwUmHJ
VESSEL Terminal bits: amzn.to/3CBYs9B
VESSEL Insulated bits: amzn.to/3py2bwZ
VESSEL GOSAI Torx bits: amzn.to/3T0ntRz
VESSEL GOSAI up to 300mm long: amzn.to/3ClpgL5
VESSEL GOSAI up to size 4: amzn.to/3Cm2nqL
VESSEL IRO bit: amzn.to/3dMmfsT
VESSEL Gold Combi bits: amzn.to/3QGLzir
VESSEL Gold Combi with magnetic holder: amzn.to/3PDv7y8
VESSEL GIZA bits: amzn.to/3AaPZHw
VESSEL GOSAI Combi bits: amzn.to/3T9gCVJ
VESSEL Magnets: amzn.to/3wH0Hoj
VESSEL USA affiliate links on Amazon.com
SKIL Twist 2.0: amzn.to/3uCnGCI
VESSEL Impact ball set: amzn.to/3pB37Ro
VESSEL bit with red plastic spring: amzn.to/3T5wJDN
VESSEL bit with reduced shank: amzn.to/3K7hMgy
VESSEL PROKON Sakisubo bit: amzn.to/3EHkK98
VESSEL PROKON Sakisubo bit 150mm: amzn.to/3ucSzdr
VESSEL GOSAI hex key bits: amzn.to/3FdD4IC
VESSEL GOSAI bit set: amzn.to/3AX84dk
VESSEL GOSAI bit set with double ended bits: amzn.to/3UfS4dg
#japantools #makita #toolhaul

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 69

@owendavis4154 7 месяцев назад

When using stainless fasteners you should use stainless tools to fit them...that way you don't contaminate your fasteners and cause them to rust.

@simonh6371 10 месяцев назад

I think the Anex 395D ratcheting screwdriver has a removable double ended bit, and can take other 1/4 in bits. I have the 306D which is the (very) stubby version of this, it's basically the ''top'' 2 inches of the one you have, with a small double ended (-6mm/PH2) bit, but it takes any standard 1/4 in bits, including longer ones if I don't want to use it as a stubby. No inboard bit storage which I guess is how they manage to keep it so short. Many other ratcheting bit drivers are 4 inches or longer as they have the bit storage in the handle end, so the mechanism is further down. For example the PB Swiss, Klein Tools, Milwaukee stubby ratcheting bit drivers.

@jeanluc397 8 месяцев назад

I mostly liked the tips on the pen drivers. I'm going to get body only from Japan and then the whole kit from US. Those little smaller screwdriver types just don't have enough horsepower for me on most things. Need just a bit more for my go to lightweight bag quick bags.

@Planeta-Shelezyaka 10 месяцев назад

Уфф... глядя на всё это великолепие - создаётся впечатление что у кого-то уже наступил Новый Год.

@darushimo 10 месяцев назад

the “dramatic re-enactment” 😂. great, fun vid. keep em comin!

@robertcasey3528 8 месяцев назад

Im glad you finally got the Anex 397 to review. I like it alot.

@ForeGeorgeman 10 месяцев назад

If anyone is looking for a good electric screw driver should check out the Metabo DB3DL2. It's 3.6 volts, but for $70 with 2 batteries and a charger it's an absolute steal. I'm a copier repair technician and I use it daily and I've never been left wanting for more power. I usually keep my clutch set on 5, and I'm working on machine screws and plastic screws which have a real chance of stripping out. A tip for not need to constantly change your clutch setting is to break the screw loose manually. If you're not holding down the trigger the bit will only turn a little bit, so you can turn your wrists 90 degrees without pressing the trigger until the screw is broken loose and then screw it the rest of the way out using the trigger. Another technician I work with has the Milwaukee and it's features are the same except it costs more and he's had to warranty it multiple time, so I wouldn't recommend it. The Milwaukee, Makita, and Metabo have a bunch of little details that are exactly the same which makes me think they maybe made in the same factory, but I don't really know. These clutched screw guns are also amazing for assembling furniture too btw.

@aussiehardwood6196 10 месяцев назад

Great video, thanks for showing the Anex ratcheting scredrivers. I have the JDM little 10.8v impact driver in white which is an old design that they continue to sell. Its even got brushes in electric motor. But these 7.2v tools have my interest for sure! My JTS (japanese tool disorder) is in remission now untill next video. Thanks Bzeug!!

@goncalovazpinto6261 10 месяцев назад

Could you check how well the Wera Vario long double ended bits from the last video fit in different bit holders?

@inflatablemicrowave8187 5 месяцев назад

I wish a company would come along and make an electric screwdriver in the normal cylinder handle form thats just slightly longer so you can stuff a battery in it. It wouldn't be oversized like the makitadriver, and it would be normal and practical in smaller uses like a regular driver without being as weak as normal electric pen drivers. Still looking for that perfect mix to replace the ltt screwdriver for computer work...

@YJ_Chen 4 месяца назад

Is the vessel electric screwdriver too big for computer work?

@saucyg6371 4 месяца назад

The vessel electric and the Milwaukee electric screwdrivers are probably the best out there rn. Sure there’s dewalt but you can both the vessel and Milwaukee for the price of it

@AutobahnDan 10 месяцев назад

Epic haul!!🎉

@peterryan7340 10 месяцев назад

Makita pen impact kit in Australia AUD $250

@mac_gyver-y2d 9 месяцев назад

makita td022 is the only impact I have seen that can be used by hand for final fine tightening. I ordered one but haven't received it yet so haven't tried it yet

@bzeug 9 месяцев назад

I didn't think of that. Yes it does lock the rotation when the power is not being applied. Thank you.

@Soundwave857 5 месяцев назад

I hate how the DT012 has a fixed speed but the TD022 has variable speed. Why the heck do not both have variable speed??? 😭

@TylerSnyder305 9 месяцев назад

That red Anex ratcheting bit driver may be just what I've been looking for. I have been looking quite a long time for a ratcheting bid driver without any plastic parts ( except for the handle) and this may be the only one. Furthermore I've been searching for year for this very rare Serv-A-Lite ratcheting bit driver which like this has what is essentially a round head ratchet mechanism in the end of the handle. I'm not sure if I'd really be happy with this large bulky handle, but I think I may have to check one of these out.

@nashjonas 9 месяцев назад

Those Olfa products are super nice 👌

@normandgoupil382 7 месяцев назад

Would you please do a video on vessel bits!! My biggest complaint with vessel is where to acquire individual JIS vessel bits. Specifically talking about where you can buy these!!! Tired of buying sets that include 90% of bits I don't use!!! Also when is wiha going to make a ratcheting central fix screwdriver?

@twalker5196 7 месяцев назад

I open the stuff in the parking lot before I leave. Have done it since I was a kid. These are our toys and it’s nice to get you hands on the item as see if anything is wrong and exchange before I drive home

@gf2e 10 месяцев назад

For the items that Amazon JP says are out of stock - are there multiple sellers? Maybe there are third party listings that will ship to the USA, but *those* are out of stock? (Maybe they were never in stock…it’s pretty easy to list an item with Amazon I think…)

@kennethhanes5438 10 месяцев назад

Milwaukee are coming out with red lithium tools

@what1865 5 месяцев назад

i really dont understand the hype around TTI products, ive now owned 2 milwaukee ratchets one 1st gen and 1 speed, and i also have the stubby 3/8, the ratchets work fine but have awful ergonomics and the paddle switch is meh, the stubby was awsome at first but has lost power over time, not to mention that the m12 batteries have little plastic hooks that break so now i have to duck tape the batteries to the tool, so yeh probobali gonna go for makita or bosch in the future, i need cordless ratchets so might just buy snapon

@what1865 5 месяцев назад

the makita ratchet just makes no sense

@goncalovazpinto6261 10 месяцев назад

4:00 spelunking!🤣

@blueworm123 9 месяцев назад

Where did you buy these from?

@bzeug 9 месяцев назад

Amazon Japan, but these items were shipped from Amazon Japan to Blackship.com then Blackship repackaged them and shipped them to me. Amazon Japan would not ship these specific items to me in the USA as they normally would.

@squirts1 5 месяцев назад

I recently got the Anex stubby ratcheting driver... honestly, disappointed. VERY high backdrag on that one.

@bulshavix6 10 месяцев назад

I got those Anex glow screwdrivers. I carried the flat one for like a month and lost it. Now I’m back to the old craftsman and keep the glow ones in the drawer in my garage

@whatfreedom7 10 месяцев назад

For anyone wanting the magnetic holder and doesn’t want to deal with the black ship and Japan shipping you can buy similar ones through mechanics time saver and pb Swiss makes their own version.

@LupusAdNoctem 8 месяцев назад

Is there any advantage in getting either the Makita pen impact or non-impact pen driver with the JDM chuck over the other? Does access to japanese anvil bits better suit intended function of one more than the other? I'm new to power tools.

@bzeug 8 месяцев назад

I'll speak for myself. I want all that the Japanese bit market has to offer, therefore I wanted Japanese power tools with Japanese chucks. The Japanese bit market is amazing. The bits are mostly cross type or "Plus", but there is some Torx, hex, and square. The Awesome variety however is found in the Japanese cross type bits. VESSEL, ANEX, SUNFLAG and others offer some really interesting features and aesthetics. Here are some of my videos with more info about that topic. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KlRqXCy_DDU.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tLAQBhiItjI.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8ulvekdhk5E.html

@LupusAdNoctem 8 месяцев назад

@@bzeug After binging all of your tool haul videos from the last 4 years, I came to a similar conclusion, which is why I'm so intrigued by these pen drivers. I was moreso asking about the drivers themselves as a vehicle for using the Japanese bit. If one were to follow your advice in this video and order one driver from Japan and the other as part of the full US kit, is there any benefit to getting the Japanese chuck on the _impact_ *or* _regular driver_ specifically? Like if the goal is to be able to work with the cool Japanese bits more often, do you find one driver to have a wider range of uses and applications over the other thereby facilitating that objective?

@bzeug 8 месяцев назад

@@LupusAdNoctem Ah. The Pen Driver (non-impact) is perfectly suited for computers, electronics, RC Hobbies and things like that, and the Japanese bits are so perfect for those applications too because it seems that the fasters in all those things are Asian anyway. The impact however, gets more into the cabinetry hardware and electrical type applications where terminal bits, pre-drilling and more European posidrive fasters (IKEA) are likely to be encountered.

@lindsaybrown7357 10 месяцев назад

Panasonic Japan also make very nice battery drivers. Use them daily for work - they last forever.

@onikwa 8 месяцев назад

how do you charge them? I suspect the 110v charger works fine on north america 120v but you never know

@lindsaybrown7357 8 месяцев назад

@@onikwa I'm in Australia, but I see they are available in North America.

@СергейТим-ч1л 7 месяцев назад

КРУТО 👍

@hardlyb 6 месяцев назад

Thanks for mentioning the Anex ball end screwdriver. I bought one, loved it, and bought 2 more. It's my new favorite screwdriver.

@martinblouin3639 10 месяцев назад

the quick ball i found it a tiiny bit dry when i got it, i gave it the ol wd40 treatment, not the regular, the dry ptfe one, you should give it a try, makes everything runs super smooth, ratchet included

@andyburns 10 месяцев назад

The Amazon pages for some of these say "ships to UK" and then immediately before say "does not ship to your country"

@mapache_del_sur 5 месяцев назад

Has anyone used any of the super expensive Tohnichi brand drivers? I guess they specialize in torque screwdrivers. Some of them are over $1000, and some don’t even list the price on their website. I’m just gonna assume they’re over engineered and awesome.

@DigitalAndYaleSolutions 7 месяцев назад

Screwdriver electric panasonic exena 🎉🎉🎉🎉🎉🎉🎉

@lesslighter 10 месяцев назад

The makita pen drives to go for 200+ USD on an old exchange rate huh Impact type TD022DSHX (basically complete package) is 22700 yen while TD022DZ (tool only) is 11900 yen Screw type DF012DSHX (again complete package) is 26400 while DF012DZ (again tool only) is 14100 yen

@benhelder7525 9 месяцев назад

Did you try the ANEX micro screwdrivers? I got a few of them and the handle is really comfortable (not as comfy as my PB Swiss but still) ANEX 3545 T8x30 if you are interested

@calvinpaul4456 9 месяцев назад

For those screwdriver mag holders. Could you orient some with handles up. And some with handles down to utilize all the spaces?

@fuloplehel 10 месяцев назад

Great tools, I like the Makita drivers. Your collection must be impressive, especially the bit department. 👍👍👍

@fuloplehel 10 месяцев назад

@@htr5372 This is exactly what is collectors doing. You can collect cars, watches, tools and never use them, just display them in a case. Even tool manufacturers are making special editing tools for collectors. Even I have tool sets with some bits I never used,but they are still there. I am not a collector but I have a lot of tools. It's just a hobby.

@htr5372 10 месяцев назад

@@fuloplehelWhat is the point of having 90% tools never being used? Just so you can call it a "hobby"?

@fuloplehel 10 месяцев назад

@@htr5372Ok this is not exactly my case, I use 90% of my tools. But in various tool sets I have some items that I never used. I like good quality tools but I'm far away from this level of a collection. Some tools are used less than the others, for example my knipex cobra XXL, which is used maybe once in a month. My hobby is just having good brands. My budget is limited,but I always buy the best I can afford. That's it.

@fuloplehel 10 месяцев назад

@@htr5372 I agree, the majority of videos are just from tool collectors, but they offer some information and sometimes when I'm interested I just watch some videos and tests. For example when knipex released the twingrip pliers I was curious to see how it's working, and after that I purchased the tool. And is a great plier used almost every day. I do a lot of maintenance work and I need a variety of tools. And when you have the right tool for the job, you are more efficient and you save time, and time is money. Another example is a thermal camera, it is expensive but I can find a faulty component in the electric panel very fast,without testing each component with a multimeter. It's making a huge difference and I can do more money. If you are a collector you must have all versions, and limited anniversary editions. I don't do that.

@htr5372 9 месяцев назад

@@fuloplehel The problem with tool collectors is that there is no long term impressions or reviews, it's always short term impressions. If I'm looking for a tool I'd want to know how durable it is in the long term among other factors.

@BLASTIC0 10 месяцев назад

What are the options for an impact driver that uses the Japanese 13mm or w/e it is? Looking for a 12v

@highcarbrider 8 месяцев назад

MIP hex drivers are AMAZING

@ooltimu 9 месяцев назад

The makita screwdriver seems identical to metabo/hitachi

@rngmstrs 6 месяцев назад

SK11 actually reads SK one-one. not eleven

@bzeug 6 месяцев назад

Yes, that's right. I can hear that when I watch Japanese RU-vidrs. I think they say something like S K ichi ichi or something like that.

@rpmcaicara 4 месяца назад

Saludes from Brazil...great reviews

@timkrouse345 9 месяцев назад

This stuff is a step up from Harbor Freight I can see.

@DDB168 10 месяцев назад

Great haul. Looking forward to the bit joint video as I've often wondered how to make use of those.

@brendanwoodward6295 9 месяцев назад

I ordered the Makita Pen Driver from Amazon Japan without battery and charger, only to realize that the battery and charger do not seem to be sold apart from a tool kit here in North America. All that I figure that I can do is either order from Japan again, or maybe just bite the bullet and buy the full NA version complete with battery and charger, and then accept that I have the Japan version chuck that will take Vessel and Anex +2 drill bits.

@bzeug 9 месяцев назад

The cheapest way to get two batteries and a charger in the USA is in a full kit. This kit in the kit was on sale around Black Friday for $188 which was a good deal. Affiliate link: amzn.to/3NDlOQy

@bzeug 9 месяцев назад

If you order batteries from Japan, please let me know how that goes. I am curious if Amazon will do it, and if the shipping seems expensive or if it is just like ordering anything else.

@bzeug 9 месяцев назад

This battery on Amazon USA is now $43. This price is way down from when I bought it. Affiliate link: amzn.to/3GR7P5V

@mirrimdimdom 7 месяцев назад

Not sure if still relevant but the Makita DC10 charger charges these batteries. It's compatible to both 10,8V and 7,2V platform. There is a huge used market on these and the should last forever. In Germany a used one is usually sold for around 10€.

@marexxx666 9 месяцев назад

Love your videos. Sometimes i see smtn new what i need to buy. Or sometimes i see what you are telling is not worth my money. I hope someday you will show us your workshop tour with all those great tools!