I found this video to be very thorough and helpful. Thank you very much for posting this information. I am disabled and have difficulty reading the fine print of the paperwork that came with the speaker.
This was incredibly helpful! I had trouble reading the small print, like other viewers, and this was also my first Bluetooth product. Your video was really thorough and easy to understand, and I appreciate that. Thank you :)
On maxing out volume at full it has a ui sound that decreases the music for short sec just like we are getting a call while listening to music and music stops. Or am i the only one who is experiencing it please let me know.
You double tap on the play button but you didn't turn off shuffle, if you did it will only go forward to the next track ahead but it cannot go back/previous track on the JBL speaker...correct?
The instructions were so small I could not read them. Never had a blue tooth anything before so I had no clue how to set this up. Thank you for your informative video
About charging the battery I have a question. Is it normal when you charge the battery, the LED to turn off, indicating the battery is charged, but when I unplug the charging cable and plug it in again it starts charging again? I didn't pay attention to this that much the first time I charged it, I took the speaker listened to music, but the battery died really soon. When I bought it and listened to music for the first time It had some battery left from the factory I guess and it lasted longer than the first time I charged it.
omg I thought mine was broken, because I was thinking it would be the same like my headphones, that the light turns green when its fully charged up. thumps up
Hi everyone! Mine connects to my pc, but I get no sound. If I press on the BT button and manually click connect on my PC, than it works. Is mine defective? I also have a sony, which works just fine.
Wenigstens mal eines von vielen Videos, welches die Resetfunktion erklärt. Aber leider nicht alle Funktionen werden erklärt. Drückt an eurem GO3 doch mal für 3 Sek. die Volume up/down Tasten gleichzeitig. Ihr werdet staunen! Der Speaker nennt euch einen PIN Code.
I have the JBL go 3 and it comes with low frequency mode incorporated. This means that, even though I can turn it off using the - button and Bluetooth button, it keeps coming back when I turn the device off. Does anybody know
It’s brand new and I played it until it died. Now it will not play music anymore. It connects and all the buttons work but it will not make any noise or play any music at all. What did I do to it?
Do you know if it should be able to connect automatically to two different devices? I switch to use it between my phone and laptop, and I always have to connect manually, really tedius.
Sir does the original Jbl go 3 talks “battery low” when the battery becomes low? I owned jbl go 1 and it doesn’t do such thing Like that. Please help me I wanted to know. So that I could return this one if its fake
If I am not wrong, in service mode this device should also connect with the USB 3C cable to a player, paying attention to use a low volume of the player ?!
Thank you very much for your review. My question is about the weird sound when increasing wolume from the go3, is it normal? and sometimes the sound goes off and on while listening radio from app. on android phone..Thanks...
JBL Go3 pairing and connecting to my Lenovo laptop, but not playing music. Hower, it is playing music on my Ifone. Despite updating sound drivers on the laptop. Despite a factory reset of the JBL Go3 speaker.
Hi, I encounter problem on my JBL Go 3 when i open it,it will turn off immediately.when i try to charge not working also.i cannot reset it due to the speaker turn off after 3 seconds
I have the same problem 😑 can I factory reset it while it is off? Also what happens when you hold the volume up and the volume down buttons at the same time?
Hi. My jbl go 3 is been charging for more than 24hours. I am waiting for the red light to turn off that indicates fully charged. But until now the red light is still on. Need help. Thanks
If i play a song with EXTREME Bass, i hear a crackling noise sometimes.. It does happen only when i started playing that extreme bass, but i still wanna know, am i overloading it? Or can it handle it?
When playing the extreme bass the driver coil is probably hitting the back plate, creating the crackling noise. I would avoid this from occurring. Eventually it will damage the speaker.
Hi, the Clip 2 was the last model that allowed to pair two of the speakers together. The feature was removed completely for Clip 3 & 4. Unfortunately JBL only kept this feature on their higher priced speaker, like Flip or Charge.
@@MegaSafetyFirst And was Clip2 paired in stereo? What about Go2 ? Thank you for the info Its so sad If Go3 had Stereo Pair and Aux and Mic it would be PERFECT
Hi I am not able to switch it on but when plugged in with charger it shows red led. Tried resetting it like you said, but no success, could you help me out?
Anyone pls. Help me , i tried to connect it to my windows 10 laptop but everytime i turn on my Bluetooth in mu laptop there's nothing pop up for pairing it to my jbl go 3 , but my other Bluetooth speaker is fine. Just this go 3 , the name of go 3 doesn't pop up in pairing device , why?
I had a hard time to connect it to my phone , after several attempt it did connect. But my laptop is still , i already did trouble shooting but still didn't work
In case the TV has Bluetooth, it should be possible to connect this way: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-z4eSH0fg9mc.html In my case I am using a TV that has the firestick software built in.
@@MegaSafetyFirst I just saw another review that said it doesn't have a microphone, so you can't answer calls. Seems like a HUGE step backwards. However, I was mainly interested in it because I thought it had jbl connect plus. Thanks for the heads up!
