If the JBL does not turn on, and the switch button is OK, do this !Plug the JBL into the charger, then press the + and Connection (not the bluetooth) buttons at the same time until it turns on.10 seconds or so.
If people have problems with charging, and soft reset doesn't work try a hard reset. Take of the outer shell , open the battery lid. unplug the battery....wait 5 min. Plug it in again and try to charge. It can take 45 to 60 minutes before the second led begin to flicker. If that doesn't work try another charger from a laptop with the same voltage (19V-3A) If that doesn't work change the battery pack for a new one.
Can you help me so my jbl xtreme 2 its last light is flashing red like it's about to die but once I plug it in it's not charging. I tried to reset alot and nothing I tried to plug it in around my house and nothing. Idk if it's the battery or my charger. Please help
can you just tell me about i don't have any problem yet i got my speaker april 15 2020 and still good but if the bettery die where can i go to get a bettery?
@@natecandee2115 1.turn the device on by pressing and holding the Power button. 2.After that press and hold the Bluetooth button and the Volume Up button together, keep holding them until the device turns off. My jbl working fine after I reset with those step. Please try it out.
1.turn the device on by pressing and holding the Power button. 2.After that press and hold the Bluetooth button and the Volume Up button together, keep holding them until the device turns off. My jbl working fine after I reset with those step. Please try it out.
@@trisulonotohadinegoro dude mine too but the power button wont turn it on at all i tried everything it only turns on when i plug in the charger but it wont connect then, also all buttons dont work when its 'turned on'
@@jblwaves4397 hello my friend, if your jbl wont any effect while your press the on off button... Even all button you've pressed and still wont change anything, maybe your battery is need to be replaced. Can you turn it on If you connect with ac adapter? Or the light indicator is blinking or not?
@@shendiax9619 @Antonio Gambacurta 1.turn the device on by pressing and holding the Power button. 2.After that press and hold the Bluetooth button and the Volume Up button together, keep holding them until the device turns off. My jbl working fine after I reset with those step. Please try it out. Do it for 2 or 3 times if your jbl keep turning off. I hope your jbl can working normally after this reset
Ive seen videos of diferent types of jbl speakers randomly turn off. And. My Jbl blue tooth head phones, and jbl clip 3 have the same issue, like wth does jbl cheap out on the circuitry or something, and i was thinking about geting a extreme one too but not any more
Alguien que hable español porfavor y me ayude con mi xtreme 2 también tengo problema que se apaga sólito tengo que tener aplastado el botón de encendido arto tiempo para que se prenda y se apaga a los dos 2segundos que se prende porfavor ayúdeme e
La bocina mia también tiene el mismo problema. Dicen mucha gente que la causa es la batería. Apenas hoy recibí batería nueva y voy a ver si eso lo arregló
Babe. Just reset your unit. Press the +button and 🔺play button together. Your unit will turn off. And when you turn it on again. Hopefully it will solve your problem
@@contactjayd my unit is Jbl Xtreme. Before i thought that this method would work. But, its not. Then i finally figured it out. That its time to change the battery.
mine too i cant use it at all, when i plug in the charger it turns on but the buttons dont work so i cant reset it. The battery camt be damahed since the speaker is only 1 month old
@@jblwaves4397 i got this same issues with jbl friend of mine. I tried 2 or 3 times to do the trick and it works. If you sure that you pressed the button correctly, maybe you need to "plug and unplug" the battery connector in your jbl. This things it will a little bit complicated. Because you must disassembly your jbl unit to do this trick. And im not guaranteed to work if you done with this option. Because this is software issue. And your jbl must update in latest firmware, so there's no glitch in your jbl unit. Have you even trying to. Update your jbl firmware with jbl applications in ios or android? For the first time use, we must update jbl firmware to the latest version 🙏🙏 I hope it will works my friend... And good luck😊😊
@@antoniogambacurta 1.turn the device on by pressing and holding the Power button. 2.After that press and hold the Bluetooth button and the Volume Up button together, keep holding them until the device turns off. My jbl working fine after I reset with those step. Please try it out.
If the JBL does not turn on, and the switch button is OK, do this !Plug the JBL into the charger, then press the + and Connection (not the bluetooth) buttons at the same time until it turns on.10 seconds or so.