Тёмный

Jcb tlt 30d fork lift teletruck repairs 

Mick Blackley SandBlaster
Подписаться 39 тыс.
Просмотров 3 тыс.
50% 1

fixing my forklift jcb 30tlt teltruck teletruck
If you want to see more content press the subscribe and ding the bell that way you will be notified of my next uploads see what else I clean up with a industrial mobile SandBlasting Rig its free and easy to do also it helps my channel out not quite sure how but youtube keeps promoting me to add this info 👍 if you think a friend or family member would enjoy this content please feel free to share it across your social media's or groups forums it may be relevant to because alot of people still have a bad opinion of blasting as an industry from a few bad operators my videos are to prove blasting is a viable reliable option for serface preparation.
As always thanks for watching much appreciated!
Hard doing for easy viewing 😀
If you are a blaster and require help please drop me a message on here. Please DO NOT email or call asking for advice on how to set up or operate your Rig. I need to prioritise my free time doing work calls, emails and quote enquiries. I will always try to respond to comments on my videos 😀
kind Regards
Mick Blackley Sandblaster
MobileBlasting.co.uk
M.Blackleys.MobileShotBlasting

Опубликовано:

 

19 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 25   
@scottkenzig5144
@scottkenzig5144 10 месяцев назад
The new shed makes a great workshop Mick 👌. Great video legend 👍🇭🇲🏴󠁧󠁢󠁥󠁮󠁧󠁿
@Mobileblaster
@Mobileblaster 10 месяцев назад
😊👌👍 I should have that video out soon 😊👌👍
@philglover2973
@philglover2973 9 месяцев назад
Awsome vid mick well done thanks
@Mobileblaster
@Mobileblaster 9 месяцев назад
Thanks mate appreciate it hopefully you enjoy my next upload its not blasting but kind of related 👌👍 hopefully that will be out Friday just a bit more editing to do 😊👌👍
@darkfactory8082
@darkfactory8082 9 месяцев назад
I totally understand the frustration in removing stuck or damaged pins... Heat helps a lot, but not if damaged. Keep always handy a piece of heavy plate, so you can put it over the holes to use it as backing under the ram. I was ready expecting the ram to slide or bend, since it wasn't realy exactly straight in line with the bores.. Anyway, didn't happen, so everything's good. We can say, that was because of too much grease, apparently... 😏 You have always to make and adapt some modifications on machines to make those suit your needs. Keep on.
@Mobileblaster
@Mobileblaster 9 месяцев назад
Over greesed pins always course problems 😂 I'm probably doing alot wrong and working with cave man tools 😂 but skills are learnt and I believe I've learnt alot from this project mainly I should act like a proper professional and blame my tools more haha
@darkfactory8082
@darkfactory8082 9 месяцев назад
Of course, it's always a cheapo tools problem! You're a pro!🤣
@scottkenzig5144
@scottkenzig5144 9 месяцев назад
Good to see the Wauchope Blue's jumper on mate 😁😉👌👍👍
@Mobileblaster
@Mobileblaster 9 месяцев назад
Yeah a good mate of mine from all the way round the world sent me it 😏😊😂🏴󠁧󠁢󠁥󠁮󠁧󠁿🇦🇺🍻🍺 holiday mode is kicking in 😎👌👍🍺🍻 we flay later today 😀
@scottkenzig5144
@scottkenzig5144 9 месяцев назад
Haha bloody oath mate 🤣.
@joeroad6618
@joeroad6618 10 месяцев назад
Guess I'm not the only one who turns ring connectors into spade connectors!
@Mobileblaster
@Mobileblaster 10 месяцев назад
😂👌👍
@funone8716
@funone8716 9 месяцев назад
Very nice lift machine!
@Mobileblaster
@Mobileblaster 9 месяцев назад
😊👌👍
@scottkenzig5144
@scottkenzig5144 8 месяцев назад
After watching this again i reckon you pumped that tube at least 80+ times with one leg 🦵 😧. No wonder you Pommys are world champion soccer (football) players 😆😅🤣🤙👌👍
@Mobileblaster
@Mobileblaster 8 месяцев назад
😂 don't skip leg day 😂
@scottkenzig5144
@scottkenzig5144 8 месяцев назад
@@Mobileblaster haha 😄 😄 legend 🤣😂 you do well mate 🤙. Only wish I was young again ☺️
@uknown6680
@uknown6680 10 месяцев назад
Im waiting for next project sandblastimg🎉🎉🎉
@Mobileblaster
@Mobileblaster 10 месяцев назад
Next video has taken me some time to put together but should make for good viewing 😊 just need to add some finishing touches to the editing possibly ready for Friday as not to miss it hit the subscribe and ding the notifications bell its free and you can stay up-to-date with my latest projects 👌👍
@neilwharton720
@neilwharton720 10 месяцев назад
Your main problem with that ram is it’s nearly at full extension when you are try to press so pretty useless 👍
@Mobileblaster
@Mobileblaster 10 месяцев назад
What bit sorry could you drop the time stamp hear?
@neilwharton720
@neilwharton720 10 месяцев назад
Well you did use a socket at the end to get more length and that worked 👍
@Mobileblaster
@Mobileblaster 10 месяцев назад
@neilwharton720 oh yeah I didn't see I was at the max stroke of the power arm I was stressing that the Bush was warming up and missed an easy step 😂
@rossnolan2883
@rossnolan2883 10 месяцев назад
😊😊😊😊😊😊
@Mobileblaster
@Mobileblaster 10 месяцев назад
👌👍
Далее
Building a SandBlasting truck
56:31
Просмотров 24 тыс.
Make A Teeny-Tiny Model Airplane Engine From Scratch
31:59
Repairing GIANT Hydraulic Cylinder | Part: 1
17:00
Просмотров 283 тыс.
JCB Teletruk 30 D 4x2 Yükleme
5:50
Просмотров 11 тыс.
Selleck TLT35D - Functions
1:58
Просмотров 5 тыс.