Jeep Commander: Dead Misfire / No Parts Needed

Подписаться 902 тыс.

Просмотров 258 тыс.

50% 1

In this video we have a look at a 2006 Jeep Commander 5.7 that came in with a dead misfire on cylinder 7 and a P1417 stored in the ECM. Turns ou sometimes you just need to boot the car! Or is that re-boot? -Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/stores/the-sma-...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained

Авто/Мото

Опубликовано:

16 окт 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 657

@SouthMainAuto 5 лет назад

For what ever reason in the beginning of the video when the engine is misfiring the camera makes the engine sound awful (mechanical noise) TRUST ME WHEN I SAY THIS, it was not "knocking" or making any abnormal noises, despite how much better ON VIDEO it sounded after the repair. Just thought I would clear this up 🔧🔨🔩⚙ -Eric O.

@AN-kg4ei 5 лет назад

(TSB) - 09-015-04 and 09-013-04 - says: “Vehicles with the Multiple Displacement System must use SAE 5W-20 oil. Failure to do so may result in improper operation of the MDS... maybe??

@wyokaiju992 5 лет назад

You know.... I always forget why i lug around my old Techtronics 'scope. Seeing you fight with that SnapOff reminded me why...

@BigDaddy_MRI 5 лет назад

Actually, engines are pretty precise and intricate pieces of machinery. And these machines are highly dependent (now) on sophisticated electronic hardware and software to make them run as effectively and efficiently as possible while providing power and reliability each and every mile they are operated. By the time an engine package rolls out to the arena of operations, the engineers are knee deep in the next generation, the next innovation, the next hardware improvement and newest software development. At some point during its operation, this machine convinced itself that there was a problem with cylinder 7 coming back to life after a shutdown. Momentarily stuck solenoid, a tiny bit of debris in an oil passage.... or a solenoid coil that’s become temperature sensitive... just enough to trigger a code and assume a solution to protect itself. And then, someone like you, with a much higher understanding, to free it from it’s bonds. To become 8 cylinders again. Hey, Eric, let us know if you got it to trigger the code again. 😂😂. Had you goin there for a second didn’t I?

@clevelandmaker386 5 лет назад

great video......still want a classic car...... too much Jetsons beepen boopen danger Will Robinson for my taste

@lovetolearn5253 5 лет назад

@@clevelandmaker386 have to agree. I own a shop in Cleveland lol. I believe we should worry about nox but this driveless self parking auto seats are crazy. So many people can't drive now so can you imagine. Also when something breaks expensive, even a auto door handle switch can cause a no start. I love the new technology for power and torque but everything else is a wash. It has nothing to do with figuring out the technology I love the challenge but it's calling the customer and saying your bill is 1200$ for garbage.

@MFingChuck 5 лет назад

A friend of mine complained about her Mercury Mountaineer not running right. Looked at it and diagnosed it for 2 hours checking every little thing and came up empty. Went into ForScan, reset the learned procedures, and warned her it might take a few drive cycles to acclimate. Ran like a champ and has been for a year now. Sometimes these newer cars just need to relax and have a beer (reset).

@bigclivedotcom 5 лет назад

Interesting technique of scoping the solenoids current waveform to see the internal mechanical operation.

@Graham_Wideman 5 лет назад

Applies similarly to injectors too.

@weaselman24 5 лет назад

Ah the bearded man! Nice to see you lurking about the place.

@Graham_Wideman 5 лет назад

Hahaha, I replied previously and didn't notice it was to Big Clive.

@rickjljr11 5 лет назад

As the solenoid core moves the inductance changes and produces that butterfly current waveform. There have been papers over the years about measuring the solenoid position based on current feedback from the coil, I wonder if that is used here. I wonder what they use to declare the solenoid failed as opposed to just a misfire.

@danmackintosh6325 5 лет назад

Bears & cars, who'd a thunk it lol

@schwartzenheimer1 5 лет назад

Not a waste of time, just thorough and meticulous. Great video, thanks as always.

@bsideadventures2180 5 лет назад

Your a great mechanic not very many left. Keep up the good work

@jumpinjojo 5 лет назад

Cody3232 Cody3232 You're*

@jerrellstrawn6409 5 лет назад

and here come the grammar NAZIs

@bsideadventures2180 5 лет назад

They got nothing better to do joe

@codyjohnson1982 3 года назад

You don't need grammar to fix them there enguns

@layyouin8420 5 лет назад

You are the man dude. Please do not be afraid to go into detail about the hows and whys. I do know mechanics to a degree, but would of loved to hear you explain somethings in the vid. It seemed almost like you were embarrassed to go into depth because you think everyone here is a master mechanic. I would bet the farm that 90% of us learn a lot from you. I know an hour long video instead of 33 minutes would seem dumb, but, maybe you can really go through a whole set of videos of "How to be a mechanic 101" ect. Even if you did that and sold it, im sure you will find a LOT of buyers here. I really like your approach to talking to us while doing your work. I am really hoping you would make a full "mechanics 101" type video, that really teaches each component of the drivetrain + suspension and gives a run down on it all. That is a HUGE task to fit in a video but I honestly feel if you came out with a 10 hour (or whatever) video, that shows mechanics by your knowledge and explained by you, you could sell that dvd or instant download like hotcakes. Im really serious, I know I would be the first to get it. Please think about this as I feel you can start with the basics, the proceed up and up. You can even use your videos on here that best show how to deal with a problem. I honestly think it will do well for you financially, and make many, manyyyy of us very happy, to support you and too learn.

@glensmith1987 5 лет назад

This is exactly why I watch your videos. Full honesty is hard to be found! I'm excited to see your follow up video

@NebukedNezzer 5 лет назад

I made my living as an trouble shooter/repair guy like you do. Your customer is very lucky(smart) to bring this to you. You did all the rite things to determine what is wrong. In the end you had a problem that went away with the rite resets. Many lesser experts would have taken the thing all apart and thrown parts at it. I really appreciate this video as it shows how you troubleshoot to find the problem. I had to have an FCC license to do my work so when doing something like this and being asked what did I do to fix it. I would reply, I waved my license over it. thanks for the comments on the license waving. we do need to have some fun.

@KevinReinartz 5 лет назад

I like the "wave license over it" going to steal that! Charge the $10 to hit it with a hammer... Then also charge the $500 to know where to hit it.

@Thankz4sharing 5 лет назад

For 34 years I was an electronics tech for a university chemistry department. When PhD researchers asked "What fixed it?" I sometimes said "Scientists have to explain why things happen. Techs don't".

@AngeredKabar 5 лет назад

I work on some old worn out CNC machines and have crossed wires I shouldn't have learning myself the ropes. Now, these machines don't go anywhere and are in the same room so when something miraculously starts working when I show up, I claim it's scared of what I'll do to it.

@JMassengill 5 лет назад

My wife said "If you can't do it, I can't do it".....Got to love that woman!

@FredFlintstone21 5 лет назад

Things I learned: Default strategies happen to preserve the cat and other things. It was working before it broke. Check engine light is called the $ light Awesome video! Thanks for sharing! Love the hood light! Nice and bright!

@cornwasher 4 года назад

You are an amazingly talented technician and a pleasure to watch. Thanks for the education.

@dougtexas 5 лет назад

Always enjoy hearing your thought process while diagnosing problems. Just proves how thorough you are to find the right problem and not just light off the parts cannon.

@jackwood8307 5 лет назад

Your to be commended for the time and effort you put into your job. Taking the time to be analytical and doing it right and only fixing what needs to be fixed. A lot of folks these days just throw parts at vehicles. Your customers are fortunate.

@blacksheep25251 5 лет назад

What REALLY makes you a great mechanic and person is the way you mentor people! Mr Josh, Ms Hannah, Ms Marie, its been awesome! Thank you! It not only gives hope for our future generations, but they also get to see how bad Chrysler screwed up our Jeeps!!!! (Chrysler rage)

@Graham_Wideman 5 лет назад

And add all of us to the list of mentees!

@williamwhite9767 4 года назад

I you drive one with a Hemi engine, you might like it!

@bgdady4269 5 лет назад

Keepin it real! I know you will figure it out. You always do! Wish I had a mechanic as dedicated as you are to quality and of course the gift of gab! Lol. You guys and gals are awesome. Keep up the great work! 👍🏼👍🏼

@frankslattery9962 5 лет назад

I only have three things to say: 1) To err is human, to really screw things up you need a computer! 2) I blame the ethanol fuel and aliens in their spaceships 3) I'm happy to see you represent your "push rod" with two fingers. Keep up the great work and thanks for all you do.

@44R0Ndin 5 лет назад

Garbage In, Garbage Out. A computer can only be as smart as the programmer, and is usually much dumber. Ethanol fuel kills carburetors, not really any effects on fuel injected engines other than water in the fuel sometimes. (keeps me in business as I work on small engines and outdoor power equipment). No comment on the "push rod" analogy.

@robertw1871 2 года назад

Love this stuff, never apologize for using your experience and knowledge, doesn’t matter what other people think… I find your content pretty amazing, I thought I was a pretty good home mechanic and learned rather quickly that I’m not and learned vast amounts of information that I’ve not seen anywhere else… I’m betting the majority of guys out there just throw parts at problems hoping they’ll go away, I appreciate the concept on knowing and proving the problem before replacing a part. I don’t work on cars for a living but I do work with other technology and this is how I approach things as well. It’s not a waste of time and the more you do things this way the more efficient you become at it…

@RADIORUNNER1966 5 лет назад

So Damn thorough Eric , your one of the few that don’t just throw parts at the issue and expect the issue to go away , Dr. Eric the auto guru....

@esmith836 5 лет назад

Bobs your uncle! Totally incredible thought process. This would of tripped many techs. There is no logic the ECM got stupid! Too much electronic BS.

@rtchrg440 5 лет назад

Cool vid Eric, enjoyed learning the MDS operation and circuits, even if a simple reboot fixed it! Way more informative then watching someone jam silicone paste in window tracks... lol

@BuceGar 5 лет назад

Your diagnostic skills are truly incredible.

@BigDog50001 5 лет назад

My thoughts: Vehicle was probably run low on oil at some point and the ECM saw something it didn’t like during the cylinder management and set code and disabled injector. Vehicle oil was corrected and everything stared working properly again but ECM programmed to continually disable injector until a reset is done. This programming was probably done by Chrysler engineers because they either thought it was necessary to protect components or they figured there is no way it would ever be an intermittent problem.

@38911bytefree 5 лет назад

But the other cylinders didnt trigger the condition nor stayed disabled. The ECM can still re-test the cylinder periodically to see if it is able to work again or not and if the test is positive, just clear that condition. The defensive programming is very important, and so does the self healing approach. Looks more like a glitch. ECM continue using volatile memory to store important data even when the car is shut off. The only way to force a data reset is a battery disconnect. Now, serious noise like the one produced on cranking with drops up to 5V have a chance to corrupt data. Automotive modules are designed to deal with that. ... but nothing is perfect. After all just keep in mind that any cellphone needs to be reset once a week (to say something) while the ECM reset ocurr on a battery change or under scan tool control. I mean, is posible to have a permanent issue even after a glitch. Sure we can discuss that data is covered by CRC, but this is not enough. Im asumming a noise issue somewhere. It is not uncommon

@44R0Ndin 5 лет назад

TJ Roelsma Over here in the USA we call that an Italian Tune-up, because the older Ferrari's and Lambo's would be bought by rich people as a status symbol and used as daily driver instead of being used as a street-legal race car, which meant the engine would start running rougher and rougher. Reason is that all those short trips never let the engine warm up to operating temperature, so it clogged with carbon and deposits. Solution? Change the oil and filter, fill the tank with premium gas, cruise around at around 60 miles an hour for half an hour or so, then floor it from 30 to 90 miles an hour, and repeat that acceleration 10 times over. Change the oil because short trips result in condensation inside the engine crankcase resulting in the oil acidifying, fill the tank with premium gas because that's what it's designed to run on (especially if it has any kind of forced induction), the 60 mile an hour cruise brings the engine up to operating temperature, and the rapid acceleration burns the carbon off the the pistons and knocks it loose from the valves. Result? Internally clean, smooth running engine.

@desertdenizen6428 5 лет назад

Driving 90 MPH is more expensive in Massachusetts than taking the vehicle to a qualified mechanic!

@d.j.9961 5 лет назад

Another great diagnosis video proving Eric O's ability in getting to the root of an automotive issue rather then throwing parts at it & wasting money! I have a problem with the cooling system on a 03 focus which eludes me! I wish i could have Eric O diagnose the problem! I found a smoked cooling fan resistor wire harness & replaced both the resistor & harness yet, the fans don't cycle properly! put a toggle switch on the 5v reference wire & it turns on the fans There is several ways to make the fans run constantly which caused my alternator to fail so, running a toggle switch allows me some control but, IT IS NOT THE CORRECT SOLUTION, JUST TEMPERARY! I SO WISH ERIC COULD DO MOBIL AUTO REPAIR!

@drewdude444 5 лет назад

Eric you are on mother loving fire! Also I think the whole RU-vid thing adds a perk that most may not recognize and that while your recording this you have someone or the effect of someone to explain and or bounce your theories off of and justify yourself and your method of diag. Like I would would other fellow techs at work except Eric brother it’s all you! Great work man thanks for the vid and brain food

@IBenZik 5 лет назад

Currently we have no current problems, Eric you are a genius. You disconnected the wires and plugged them back in. Corrosion kills.

@chrytech636 5 лет назад

Awesome diag. I love watching other people's diag process, it helps fine tune mine. We all have our ways of going about stuff we have learned through good 'ol school of hard knocks. I do believe this vehicle will come back with either a bad solenoid or the jumper harness under intake shorted (i have seen oil soaked wires with insulation falling apart, intermittently touching) . from experience only i would of resorted to swaptronics if the harness passed the visual and have the customer take it back if i cant duplicate it.

@marcbates675 2 года назад

That's why I love you brother you fully checked the car love your videos !

@buntnik 2 года назад

Some days your the dog, some days your the hydrant…. Done a great thorough analysis and viewers learned from it. And enjoyed it!

@jdretiree2433 5 лет назад

even though you found nothing wrong and charged your diag fee, the customer should be happy the head did not have to be removed.

@SimplyDiagnostics 5 лет назад

Great video, you say a waste of time, I say a great investment in time to learn how a system works. Thanks for sharing Eric 👍

@klumpy103 2 года назад

I think you were triggered earlier by the fact the setting criteria didn't seem to add up, that along with your thorough diagnosis that there didnt actually seem to be any valve issues, sealed its fate. Great work Mr O.

@baxrok2. 5 лет назад

"A reboot fixed it." Never said that about any of my vehicles! lol Thanks Dr. O!

@elcheapo5302 5 лет назад

Some days you get the bear, some days...well, you know. Great video on diagnostic process, Eric!

@bigguygoogle457 Год назад

You are freaking awesome brotha. Like other have said , most would have replaced all kinds of parts...Not you..Your time and attention is much more valuable for that..

@Skinnyboy297 5 лет назад

Just started watching your channel and absolutely love it..so much that I’m thinking of driving from GA to have you look at my 2002 Taurus driver window not rolling down problem lol

@keithhowells3555 3 года назад

In the future that code will trigger your memory to perform a reset before doing anything else. Great work ethic anyway. That's why I keep coming back to your channel. As an ex diagnostic technician I feel your pain. Great work Eric as always!

@gradyjimerson3605 5 лет назад

Excellent diagnosis. Great work as always.

@asusservertek131 5 лет назад

Eric you are the man. You know the manufacture/dealer would of had this person buying a lifter assembly and a new solenoid plus all the labor $$$... Just reset the PCM and bam, Bobs your uncle. I don't wanna speak too soon,, but I didn't see another video on this so I figure you didn't find any issue with it that next morning. Awesome video, love the channel. Keep up the good work and I wish you and your family all the best from Florida.

@thesearcherman6652 5 лет назад

Great frekin’ video, had me on the edge of my chair. Well, as an auto mechanic turned commercial HVAC tech, (now retired) I can tell you that 99.9 times out of 100, an electrical related problem will return after a reset only. Unless there was a known voltage spike of some type. Maybe this one will fall into the .1% category. Thanks “Big O”.

@ZzzRoofus 4 года назад

Not surprised you found this. Modern computers 🤦 So the PCM thought it has a fault and shut off the injector, which was the source of the misfire. Brilliant! Good job diagnosing it and not charging the customer a fortune to pull the head and replace the lifters/solenoid. You are one of the few very good diagnostic techs Eric. You deserve more credit than you give yourself!

@bochek2 5 лет назад

Eric, I just had a Dodge ram in the shop with the exact same problem. After following the same diagnostic route as you I came to the same fix. Disconnecting the battery for a few minutes fixed the problem. Customer has had the truck for a few weeks now with no problems. After searching online I've found a few doccumented cases of this.

@jgeorges3061 3 года назад

Eric, interesting problem not many see like this problem and thanks for an AWESOME video/ info u r sharing with us enjoyed every second of it thanks brother for what u do.

@wwrite 4 года назад

You can only do your best, and from what I’ve seen that’s pretty darn good!

@Silent-Lucidity 5 лет назад

I get a kick out of your use of "somewheres". For some reason I catch that any time you say it. Keep up the good work sir!!! Great content!

@feltro19 5 лет назад

Good one eric you did all you could do you are soooo good at what you do great job flush that one next

@cassiuspuckett8789 5 лет назад

Well hell Erick, what can you do, besides give it back to the customer? You checked all possible electronic inputs, and suddenly it resets it self. Setting watching you do this knowing something is wrong, and the suddenly no problem. Aaggg, computers! who knows why they do what they do. Nice video Erick, thanks for sharing......

@c431inf 5 лет назад

Hate the fact a computer issue jacks up your car now more often then a mechanical failure and they are a bigger pain in the ass to trace, great work bro watch your vids daily

@michaelelliott289 5 лет назад

Well, noticed something like this before. Had to do with how long the vehicle was driven and noticed the injector wiring from that similar cylinder was sitting on or almost on the engine. Which caused the misfire. Moved the wiring and added more protect from the heat of the engine. Simple fix and changed the oil. 😊 Love the videos Eric O. South Main Rocks. 😁 I've found vehicles have things like hiccups. 😁

@simoncorporation3 Год назад

This video is a few years old but is a big help this tech knows what the hell he's doing, I like how he analyzes using knowledge of electrical. I do "HVAC/R" my skills are similar in my approach. I have a problem with my 2006 Jeep Commander 4.7L, repaired a myriad of issues from overheating first due to fan blade shroud coming lose over radiator (thought it was a leaking radiator), then leaking plastic "T" to cabin heater core, after replacing that & filling radiator (which was not empty) engine wouldn't start, I only disconnected air intake hose to "M.A.F sensor" momentarily, no leaking "vacuum tubes", when I put my diagnosis computer on the engine it said cylinder 1 misfire then multiple misfires. I will check it tomorrow to figure out what the hell is going on. (Prior) I never let the needle touch red-only to halfway and turned vehicle off until I could put it in a good parking spot. I left it for four days it was too cold to mess with until repair stated above.

@TheWatcher-Q17 5 лет назад

Matey, been there and it could be that in the diagnostic process you've fixed a continuity issue just by unplugging and plugging back in fixed the issue. Just know we are watching and like what you do. STAY STRONG AND GOD BLESS.

@stacydornan9765 5 лет назад

Sometimes a little bump on the road makes an elm go nutty, great diagnostic Eric.

@johnnyharkey2535 3 года назад

Thanks first of all for the great videos Eric. I further my knowledge s bit with each of your videos I watch. I have a hemi 5.7 in my ram 1500 so anything on those you do I watch with great interest in case I need to use it down the toad. Take care and many thanks sgain.

@deandrahubbs.waduge864 4 года назад

Mr. O; you are the Lieutenant Columbo of the automotive repair industry.

@Jpilgrim30 5 лет назад

Those Chrysler cylinder deactivation solenoids will wipe out the driver in the PCM in a heartbeat when they go bad. The local PD will bring me the stuff their guys can’t handle. I had a charger come in from them with a DTC for cylinder 7 solenoid. Checked the resistance of the solenoid, used a fused jumper to test it while watching the amperage and all was fine including the harness. Tested at the PCM and the driver was bad so it was replaced. Came back a few weeks later with same code. Replaced the solenoid and the PCM again and no more problems. Tried clearing the codes and disconnecting the battery for a while but no dice it was fried. They have some shitty protection on those driver circuits so from now on it gets replaced just to be safe.

@SouthMainAuto 5 лет назад

I find it hard to believe in today's day and age that the ECM would not have a current limiting resistor on that driver? I can do the math because we know the voltage and the amperage draw and the resistance of the solenoid. That would be the fastest way to tell.

@envisionelectronics 5 лет назад

South Main Auto Repair The outputs of the ECM typically won’t have any current limiting resistors but instead have current monitors built into the chip or FETs and are usually self protected. They will lock out the output until it is reset. Usually just a battery disconnect for a few minutes will do it.

@Jpilgrim30 5 лет назад

South Main Auto Repair you’d think it would have something but that was two PCMs. The original and first replacement. Kind of a shock to me at first.

@Jpilgrim30 5 лет назад

Aaron Hammett naw it was fried. I tried everything before replacing the first and again with the first replacement. Cleared codes, reset PCM, disconnected battery cables and connected them together for around an hour. I pulled the pins out of the connector for the solenoid so it wasn’t connected when I hooked the battery back up and had a test light in its place so there was a small load there. Trust me I thought of everything possible.

@Jpilgrim30 5 лет назад

al whit it was an intermittent fault with the solenoid. It’s had to have been a good year since and no issues. It may have protection for the circuit but in this case it must not have been fast enough

@wyattoneable 5 лет назад

My Magnum has this system as well so I'm watching and listening with intensified interest.

@AN-kg4ei 5 лет назад

My Aspen has this also and I would be interested to know if the correct oil viscosity was used when last changed. Is it possible that the cooler oil before closed loop is having a hard time getting through the valve body? I have heard of this being an issue and perhaps after it runs awhile, it might make the oil passage easier?? Just a silly thought. The Tow/Haul switch kills the MDS so you can verify states without a tool if needed.

@hanskinslo326 5 лет назад

At least yours is a V8 (I assume) and not the dreaded 2.7 V6! My brother in law had both his head gaskets blow on his 2.7 Magnum.

@jimposey8848 5 лет назад

Thank You Mr Wizard !!!!! now have a couple shots, once home. I owned 2 different MDS Hemi's never had an issue with either, but, I also owned a 6 speed R/T 3.92 gears posi. No MDS on stick HEMI. Loads more fun. Great on fuel also.

@63256325N 5 лет назад

That makes a lot of sense about the reboot, after all it is computer controlled. Good job and I hope it holds. Thanks for the video.

@Lurrkiing 3 года назад

I've had two or three chevy trucks with the "reduced engine power" message that never came back after unplugging the ecu and scratching my head. Love it.

@mrb1864 5 лет назад

no parts required, hey pal that PHAD line, You'll be wearing no shirt next !

@CubasAutomotive 5 лет назад

Or the flip flops while working.... lol

@yhird 4 года назад

I might try something very basic like disconnect the battery overnight and/or re-flash the ECM and see if the problem still exists. Great video Eric.

@unk1964 5 лет назад

Omg this is so over my head. Idk what that first box u had was, but I want one!! Especially the key programming one in another episode. It almost seems you could make the motor make French fries with that thing. You could start a school, you think like an engineer!! Amazing wealth of knowledge

@89636 5 лет назад

Hey Eric, next time you have a car with this situation just hit the rest button, I think this was a geat learning lesson, great job!!!!!!!👍👍👍

@c86tail 5 лет назад

Great video and ideas to troubleshoot this issue. Enjoyed this one !

@aleblanc3547 5 лет назад

Anytime we had problems with our computers, the first question IT would ask was, "Did you turn of and back on again?" :>) Thanks Eric for another one full of fun!!

@ToXSicK1340 5 лет назад

Dang Mr. O', that was a Rough one there, Sir. Don't know what you could have done to make it any better?? Just have to chalk that one up in the "WTF" column, take an Excedrin (OR Bud light lol ) and move on to the next job. Thank you for taking us along for the ride Eric. (and STOP beating yourself up, NO ONE could have done it any better/easier!!!) GREAT VIDEO!

@mattbauer2899 5 лет назад

Was a Chrysler mechanic for almost 16 years, when Chrysler came out with that MDS system it was a real pain in rear...can tell you that system would throw a lot of issues if the customer did not change oil on a regular basis, when they get a lot of miles it seemed we changed out a lot of those solenoids due to lack of clean lubrication

@Sebastianx115 3 года назад

"They ask me why I drink" i feel you cool to see the different ways of diagnosing ppl do

@ACHAutomotive 4 года назад

Glad to see I’m not the only one who uses a Surface Pro!

@joshuadehmer7376 3 года назад

Oh by the way I love your show I love your station you are a awesome mechanic technician and shop owner just wanted to let you know sir thank you for your videos

@jwilkers1 5 лет назад

I was thinking about this same issue today in that there are so many ways to attack diagnostic problems that sometimes we end up losing time following a method like what you laid out here (which I have zero issues with btw). On the other hand how many cars have you received from other shops that didn't follow basic procedures and missed something you caught by checking the basics? Nobody likes chasing ghosts and it sucks not being able to bill out time spent chasing them that's a good reason to keep your profit margins decent on other jobs to make up for all the many ways we can loose money/time on the ones that kick out butts. Keep up the good work besides there was a ton of good info in this video for those who were paying attention.

@MegaGeorge1948 5 лет назад

Hi Eric. No parts needed? Wow! You are almost as good as Ivan. :-))

@petewasere2000 5 лет назад

Great vids dude keep them rolling .

@DarkRider2k3 5 лет назад

Oh jeez that's great... I wonder how common this is to happen? Great video!!

@PineHollowAutoDiagnostics 5 лет назад

Hey Eric, I think this guy wanted to come to my shop!! Too bad I was hanging out with Keith at the ASA Super Saturday training. SO you stole my customer hahaha

@hanskinslo326 5 лет назад

Couldn't have been "stolen" by a better shop, though!

@BriarHood 5 лет назад

Eric was at the ASE Super Saturday work day.

@edwardtabor77 4 года назад

State College to Buffalo is quite a drive. I live in York PA about 125 miles from State College. BTW that engine sounds like it has other issues.

@kentsimon2152 5 лет назад

ECM problems are a real pain. I am only guessing here but the ECM does like to remember stuff and I wonder what it was remembering that was causing it to reset the code. You are certainly very thorough and even as you said several times that you were probably wasting time checking the injector on 7 and reminding us the ECM can shut it down I would not have been a waste of time if the injector was in fact bad. I was thinking the oil line could have been clogged when you started to explain how it works (and the hint that no parts were required to fix it) Remember that Vett with the injectors that died when they were hot. I just don't get why they are putting ecms in the engine compartment. So far out of all the car fix you tubers (the ones you have mentioned) I appreciate yours the absolute most. Thank you. If it were feasible I'd drive to your shop from LA to have you work on my car.

@factsdontcareaboutyourfeel7568 5 лет назад

It's a Jeep thing. You wouldn't understand. I have waited so long to use that he he he. I'll see myself out.

@SouthMainAuto 5 лет назад

I understand... I have the hat too....

@harris8390 5 лет назад

Facts Don't Care About Your Feelings Lmao, is that a reference to what the apare tire covers say on the back of jeeps?

@factsdontcareaboutyourfeel7568 5 лет назад

It was a Jeep advertising campaign I saw a few years ago in Australia. My sisters bought one each despite it :D

@thomasfletcher760 4 года назад

Dang , ya beat me to it ( was gonna say the same thing 🤣 )

@spelunkerd 5 лет назад

I like the way you build evidence, even to the point of double checking that you're on the right cylinder, etc. I suppose if you spent your day testing the same brand of car, some parts of the workflow could be streamlined. However guys who work on many brands with generic scan tools can't possibly know code setting criteria for every circumstance.

@bonemanmcjames2953 5 лет назад

Spelunkered, between SMA, Brian's, and you, I'll beat my 2001 Dodge to the grave.

@arthurfricchione8119 5 лет назад

Eric, fantastic video. Enjoyed the troubleshooting process. Know you found nothing but it was a good learning video. If it shuts down again hope you do a follow-up. One question if it was nothing why was the plug so fouled? Must of been misfiring for awhile. Guess there was a GREMLIN running around in there. Good video though thanks for taking us along for the show. ❤️

@stuartcookie133 5 лет назад

Thanks Eric,the cats outta the bag now. Secretly been pitching the show "This old screw" to TLC starring Pam Anderson, sure to get picked up now!

@markferraro5250 5 лет назад

excellent video Eric you did great very educational

@timmayaz3182 5 лет назад

I'm trying to get better at working on my own car, but when I see all the computers and diagnostic tools you need to use (and understand how to use) to solve so many problems on modern cars, I know there is a limit to how much I will EVER be able to do myself. I don't have the money or knowledge to use all that fancy stuff effectively. I love watching you do it though!

@videosandmoremouse4626 5 лет назад

Mick from UK. This has happened to me a few time's. Check and double checked and did just same as you. Did reboot. And car runs fine. Some injectors are coded. So if you put new one it you have to tell ecm or so that's what you have done. So some time it forgets. And you end up with a misfire.. Or injector has a hissy fit. Tell injective module to shut that one off.. It happens. You did everything by the book. Hay you mite of just give up. And some people don't know you can do a reset. Been watching your cha for few weeks you work same as me. Work though what wrong. Sometimes coming back next day. To figure out what's wrong. And one video you did. Where you had a fault you had was down to power steering Val fluctuating... Your like me never give up. Your ace at what you do

@chrisfreemesser5707 5 лет назад

I own a Swiss watch Eric...runs as smooth as a Jeep Commander!

@robhalter 5 лет назад

Well done diagnostic work.Kind of eliminates any electrical issues.I also think it is a lubrication issue could have low on oil at one time or lack of maintenance .dirty oil can cause lots of issues with very small oil passages on displacment on demand engines.

@jerrypeal653 5 лет назад

Gotta love them confusers !

@Teenagegoogoomuk 5 лет назад

Hey Eric. I seen it again on your vids. If you take a 1/4' drive #10 socket and rap it with some 33+ you'll have your mini roll of tape.Thanks for all you do in making these vids.

@PaulHigginbothamSr 3 года назад

My brother has this engine in his pickup. I was always very pleasantly surprised at the amount of acceleration this 2006 pickup has. I would equate the acceleration near to my car in 1970. It was an ss396 with 350hp with cold air cowl induction. I recently got a dodge Journey RT with a 3.8 v6 and while no slouch with the vvt engine with a 62te transmission awd and it gets really excellent mileage about 2.5 times better than my brother's pickup. I think it would be a very close 1/4 mile race as the pickup might beat it off the line until about 150 yds when the Journey would pass it with very light panels like the back & side doors & lower rear fenders and an extremely light hood.

@ToyotatechDK 5 лет назад

You did 100% correct in my opinion Eric.

@polishedturdspeedshop 4 года назад

Classic interpretation of how the lifter and pushrod interact ;)

@edwardfast4525 5 лет назад

Darn jeeps,you are good with those computers and electrical.

@moldingpro7208 5 лет назад

The owner is very fortunate to have brought this vehicle to YOU. Many other "mechanics" would have thrown numerous expensive parts at this vehicle to no avail - leading up to, maybe, replacing the PCM.

@KevinReinartz 5 лет назад

I always find it hard to throw parts at something for no good reason, it's the main reason i work for a municipal shop, if i say it needs something it gets it, and if nothing is needed it gets shipped, and my paycheck stays the same. The industry does need more guys like him. They should be heavily rewarded

@KCautodoctor 5 лет назад

So this is the infamous "logic lock" situation your posted over on Diag.net website. Glad to now have a video to go along with your original written description of this issue.

@BeezyKing99 5 лет назад

Haha funny... I've just come from a video that says exactly what you said on a video titled "dui suspect drags cop"

@nhra7110 5 лет назад

wow, fascinating! Thanks Eric

@badranger2004 5 лет назад

Got to love the 16 spark plugs in the 5.7

@lonwillis783 5 лет назад

Wow hard reboot! Good Job Hope it works....

@PaulHigginbothamSr 3 года назад

After all that and it was the computer not the lifter. If I were this guy and your tests the next day were normal I would be a very happy camper.

@BigMac2222 5 лет назад

Fantastic job. The in cylinder transducer was pivotal in your diag. I can imagine a lot of well meaning techs verify ignition/injection/solenoid integrity and call for additional teardown time to find nothing physically wrong. You have the ability to recognize when the evidence does not fit the hypothesis and changed direction accordingly. I know you like to joke about being a dummy but this is one that a lot of good mechanics would have hit their head against the wall not knowing where to go next.

@willemstreutgers1154 5 лет назад

Well Eric, what we learned is that they have build-in a safety procedure that stays in the memory of the ECM. erasing the fault codes is not enough apparantly. So next time why not first try a reset of the ECM? And only when the fault appears again search further. Thanks for the lesson learned, it will safe me a lot of time when i encounter such a problem.