jeep grand cherokee water pump replacement 

Diy how to replace and install a water pump on a 6.4L or 5.7L hemi with #fred_eazy21
This waterpump can be purchased here on amazon:
www.amazon.ca/...
Replacing the hemi water pump procedure for the 392 6.4L hemi will be similar to the 345 5.7L Hemi
Oem mopar part number for the 2019 Jeep grand cherokee srt srt8 is:
MOPAR 5038677AD
The Jeep Grand Cherokee SRT8 Oem coolant is OAT orange
Mopar 68163848AB
Today we used Preston all vehicle coolant which is yellow.
Tools list:
19 mm combination box wrench for hemi temperature sensor
Metal pipe to give extra leverage to the ⅜ ratchet or breaker bar for tensioner pulley
⅜ ratched with extension
16mm box wrench or socket for tensioner pulley bolt
15mm socket for centre water pump bolt
13mm socket for hemi thermostat & waterpump bolts
11 mm allen key for water pump breather
Channel locks for radiator hose clamps
Pipe wrench for if you don't have an 11mm socket to remove the water pump breather
Pliers to remove thermostat
Crowbar & microfiber towel to pres in metal tube into water pump
Drain pan to catch coolant
Flat head screwdriver to assist with hose clamps & clips
Pick for if you don't have a flat head screw driver.
Hammer to hit the water pump with
Vice grips in case you don't have channel locks
Changing the water pump in a hemi took my about an hour on my Jeep grand cherokee srt
For more Great #Mopar & #jeep content please subscribe!