Тёмный
No video :(

Jeep JL Wrangler and JT Gladiator ARB Twin Air Compressor - Air Down With A Button- DIY On Board Air 

Mohawk Designs Off-Road
Подписаться 10 тыс.
Просмотров 13 тыс.
50% 1

I am getting ready to get more trail time with my Jeep. I finally got my on-board air setup Installed. I decided to make airing down a little less time consuming and to integrate the air down process with an electronic valve into the air line plumbing for the ARB Twin air compressor. This allows me to quickly and evenly air down all four tires at the same time with a single push of a button with a hook-up at each corner. I ended up purchasing all components separately and created my own kit for the air lines, couplers, and hoses to keep the cost down. I had this Idea on the back-burner for some time and finally get to share it with you guys.
Links For Items Used.
ARB Twin Air Compressor: amzn.to/3ISY3iA
3/8" Air line & Push Connectors: amzn.to/3J2MPbD
3/8" Electronic Solenoid Valve: amzn.to/3sdxIFf
3/8" to 1/4" Bulkheads: www.ebay.com/i...
Universal Air Hose Couplers: amzn.to/3GzZ4uJ
Lock on Closed Air Chucks 1/4": amzn.to/3oji4as
1/4"x 50' Polyurethane Air Hose: amzn.to/3sdyAtv
1/4" Brass Barb Fittings to 1/4" NPT: amzn.to/3L2gH9R
Push To Connect 3/8 Fittings: amzn.to/3J1s6VI
NPT Tank Valve: amzn.to/3of841V
1/4" NPT Fittings: amzn.to/3GkP1JF
Braided Compressor Whip: amzn.to/3AQGJbv
Digital Tire Inflator: amzn.to/3L6ZImy
10 Gauge Wire For Supply: amzn.to/3L58LEM
Wire to Switch And Ground: amzn.to/35Ka4J8
Wire Connectors: amzn.to/3rmjz9N
Wire Bolt Connectors: amzn.to/3L8wELx
CA Glue: amzn.to/32RPKEs
Follow me On Instagram / mohawkdave555
My Amazon store: www.amazon.com...
Linktree: linktr.ee/Moha...
Sponsors, Affiliates, And Promo Codes
---------------------------------------
67 Deigns Made In USA Device Mounts- 67d.com/mohawkd...
Diode Dynamics- www.diodedynam...
PRP Seats- www.prpseats.c...
Addictive Desert Designs- www.addictived...
KEMIMOTO Coupon CODE '' Mohawkoffroad" 15% OFF- www.kemimoto.com/

Опубликовано:

 

26 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 48   
@thomassorenson6371
@thomassorenson6371 2 года назад
Dude this is amazing, everything I’ve imagined how I would want to do an air setup, but I’ve always been unsure of what to buy!! And you’ve done all the work for me, thank you!!
@MohawkDaveOffRoad
@MohawkDaveOffRoad 2 года назад
Thanks for watching!
@thomassorenson6371
@thomassorenson6371 2 года назад
@@MohawkDaveOffRoad All of my parts and compressor will be here today! Should have it all installed by Sunday! I’ll make a video for you!
@justiny4360
@justiny4360 2 года назад
@@thomassorenson6371 Did you make a video by chance?
@HAMMER_2.2
@HAMMER_2.2 Год назад
SAME, SAME, AND SAME!!!
@AaronAdventurez
@AaronAdventurez 20 дней назад
pretty slick setup
@SamuelSoto17
@SamuelSoto17 2 месяца назад
Awesome video thank you going to try and replicate!
@stefankruger1057
@stefankruger1057 2 месяца назад
Heads up: Your lock on closed air chucks links to open air chucks. Thanks for the vid and parts links I really appreciate it! Had the same idea and no where to start.
@MohawkDaveOffRoad
@MohawkDaveOffRoad 2 месяца назад
Thanks for the heads up.
@Sam1986E
@Sam1986E Год назад
Best setup i have seen so far! thank you
@Doc.s-Huckleberry
@Doc.s-Huckleberry 2 года назад
Nice design. I am in the process of copying this but I'm having trouble with the wiring. Any chance you'll do a quick video breaking down the wiring? Trying to use an Aux pod for air down/air up.
@bradleycunningham998
@bradleycunningham998 Год назад
Awesome onboard air setup!
@Warpetrie
@Warpetrie 2 года назад
Haven't seen an OBA setup with the solenoid for airing down, that's pretty slick and I'll have to include that in my system as well! Also love the guage port in the cab, very handy 👌🏼
@rborges111
@rborges111 Год назад
Great project. Congrats... I want to do something like this!!!!
@iONsJeepingAdventures
@iONsJeepingAdventures 2 года назад
I’d also ad a one way valve on the Solenoid to keep the Elements out
@MohawkDaveOffRoad
@MohawkDaveOffRoad 2 года назад
That is a good idea. Thanks for the suggestion.
@ChasingDreamsLivingLife
@ChasingDreamsLivingLife 2 года назад
Awesome Setup!!!
@iONsJeepingAdventures
@iONsJeepingAdventures 2 года назад
Great video gave me ideas I’ll install the arb in the fender areas and maybe put hookups under the seat to keep them out of my nasty elements cuz I thank my winters would destroy the ports
@MohawkDaveOffRoad
@MohawkDaveOffRoad 2 года назад
Thanks for watching! That is exactly why I put it in the back. Mud, snow, and salt are not a good combo for the compressor. I have seen what they look like after a year of salt.
@davideiannello4464
@davideiannello4464 2 года назад
Just ordered my arb with the mount for behind the fender. I planned on the hookups to do a full air up at once but the idea of the solenoid for the air down is just as good. I assume I can figure out the setup from the solenoid instructions themselves.
@MohawkDaveOffRoad
@MohawkDaveOffRoad 2 года назад
@@davideiannello4464 Just two wires. Very simple.
@dainperrault585
@dainperrault585 Год назад
love this!
@jacoblastant3976
@jacoblastant3976 Год назад
did you utilize a splitting air manifold, or just run T's at every tire/wheel?
@TheDamralh
@TheDamralh Год назад
Nice job, How do you connect the switch on your OEM panel please 😊
@RogueMech
@RogueMech Год назад
Nice work!
@MohawkDaveOffRoad
@MohawkDaveOffRoad Год назад
Thank you!
@rickcovarrubias352
@rickcovarrubias352 Год назад
Love this system. Can you send a diagram of where the hoses, (T), and release valve go? I have the compressor. Just need to order the hose kit and run it... Thanks in advance
@Molanding
@Molanding 9 месяцев назад
Great video and setup. One question, how are you monitoring each wheel to 12 when they are all connected to the solenoid? Maybe I missed it but you are splitting each side and you only have one monitor. Awesome rig!
@MohawkDaveOffRoad
@MohawkDaveOffRoad 9 месяцев назад
Thank you. So all four wheels are connected together. All four tires have the same pressure when all of them are hooked up. Each wheel is split off from the main line that is connected to the compressor and the main line is split off to the release solenoid and the gauge. When you are airing down or up the pressure in all four tires equalize. Hope that helps.
@johnrodriguez3917
@johnrodriguez3917 11 месяцев назад
What wheel is that? Jeep look sweet!
@joshuathorpe3808
@joshuathorpe3808 Год назад
Sick setup. Did you happen to put plastic caps over the red connectors under the Jeep? I am thinking mud would not be ideal in the connectors.
@justiny4360
@justiny4360 2 года назад
Can we get a diagram 😁
@ChasingDreamsLivingLife
@ChasingDreamsLivingLife 2 года назад
agreed!! exactly what I was trying to figure out. Maybe a simple drawing of the routing of everything.
@justiny4360
@justiny4360 2 года назад
@@ChasingDreamsLivingLife Yeah I am hoping he sees this. I already got everything. Going to try and figure it out soon.
@ChasingDreamsLivingLife
@ChasingDreamsLivingLife 2 года назад
@@justiny4360 I drew it out on a piece of paper… think I have it figured out
@justiny4360
@justiny4360 2 года назад
@@ChasingDreamsLivingLife Would you mind sharing?
@ChasingDreamsLivingLife
@ChasingDreamsLivingLife 2 года назад
@@justiny4360 have an email or something? Message ya somehow
@justintetzlaff3651
@justintetzlaff3651 2 года назад
I was looking at different four wheel at once set ups and I'm liking yours a lot. one quick question, why not add a air down valve set to 12 psi to the output of the solenoid? you wouldn't have to sit there and monitor the air down, just connect the hoses, hit the switch and then check it at the end.
@MohawkDaveOffRoad
@MohawkDaveOffRoad 2 года назад
Thanks!, you can do the pre-set valve. I run different psi for different conditions, it's easier for me to just have the gauge on. Sometimes I start out with 15 psi and I'll go as low as 5 psi.
@durtadventures4348
@durtadventures4348 2 года назад
Dude, sick Design, i slike the airdown solenoid, do u happen to have an amazon shopping list???
@MohawkDaveOffRoad
@MohawkDaveOffRoad Год назад
Thanks. It’s in the description.
@TwistedOff
@TwistedOff Год назад
👍
@drrockf4d
@drrockf4d 2 года назад
That is awesome! Was looking to do a DIY system myself, thanks for all the detail. Have you checked each tire to see if they truly are equalized? I know some reviews of up down air system were off by as much as 6 psi between the tires.
@MohawkDaveOffRoad
@MohawkDaveOffRoad 2 года назад
Thank you. Yes, I checked the tires individually and they are all at equal PSI.
@mihaistreza
@mihaistreza 2 года назад
Get Apex valves, from 40psi - 10psi in 20 seconds 😝
@brianbrenda63
@brianbrenda63 Год назад
If you get a puncture, will all 4 tyres lose pressure?
Далее
Музыкальные пародии
00:28
Просмотров 19 тыс.
DIY Your Own *MODULAR* 4 Way Inflation System!
23:01
Просмотров 12 тыс.