Тёмный

Jeep JL Wrangler JT Gladiator Truck Front Track Bar Reinforcement and Sector Shaft Brace by Synergy 

Wayalife
Подписаться 218 тыс.
Просмотров 127 тыс.
50% 1

In a quest to find the source of his death wobble, the member doubletapdaddy on WAYALIFE.com filmed and posted up an interesting video clip and in it, you can clearly see his steering box pulling away from the frame rail and moving back in again as he turns his steering wheel to the left and to the right. And, while I'm reluctant to say that this is the cause of his death wobble, I will say that it can't be helping anything. Fortunately, Synergy has a solution for this movement and it's with their all new track bar reinforcement bracket and sector shaft brace. This thing is designed well, seriously beefy and you can be sure that once installed, any deflection you might be seeing in this area, will be a thing of the past. We hope that you find this installation video to be both informative and helpful to you..
ADDENDUM: I spoke with Synergy after posting up this video and was told that they now have new instructions and in them, they recommend that you apply blue loctite on the two bolts that secure the sector shaft brace to the track bar reinforcement bracket.
Come visit us at: WAYALIFE.com
Synergy Sector Shaft Brace: amzn.to/2JkQHLi
42mm Socket amzn.to/2DCcM1N
Socket Adapter amzn.to/2P2HjLE
Impact Wrench amzn.to/2Ycl1Lr
TEKTON Tools: bit.ly/2xdl2Cu
CB BAR: bit.ly/2K7kIv6
HITCH STINGER: bit.ly/2Zh4hCL
JL Air Compressor Mount: bit.ly/2SKOREe
WAYALIFE Merch: www.wayalife.com/store/
Support WAYALIFE by Buying Jeep Parts Here and at no additional cost to you: www.amazon.com/shop/wayalife
* Please note that the Amazon links posted are associate links and WAYALIFE does earn a small kickback for purchases made through them.
#trackbar #sectorshaft #reinforcement #bracket #reinforcementbracket #synergy #jeep #wrangler #jeepwrangler #jlwrangler #wranglerjl #jljeep #jeepjl #gladiator #jeepgladiator #gladiatortruck #jeepjt #jtjeep #jeepgladiator #wayalife

Авто/Мото

Опубликовано:

 

1 дек 2019

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 527   
@darrenroos6408
@darrenroos6408 2 года назад
Public Service Announcement for those that have the original design: There is a screw on the bottom of the aluminum block to prevent the bronze ring from coming out; however, even with this screw tight, the bronze ring in the aluminum block has a tendency of rotating (speaking from experience). If it does, there is a chance that your grease hole in the aluminum block no longer lines up with the grease hole in the bronze ring. A quick way to test it is if you apply grease and notice grease coming out between the aluminum block and the ring instead of the ring and the pitman arm nut, your bronze ring has probably rotated. Synergy has corrected this issue by designing a new aluminum block that has a set-screw drilled into the side of the bronze ring to prevent it from turning. They also have a new pitman arm nut design that includes rubber o-rings to help keep the grease in and foreign particles out.
@judsonhicks3807
@judsonhicks3807 4 года назад
I was just about to buy one of these, so perfect timing on the video. I love how all your install videos are very detailed, including things like torque specs, great job!
@wayalife
@wayalife 4 года назад
Awesome, so glad to hear it :)
@wyattblair2556
@wyattblair2556 Год назад
THANK YOU for sharing your knowledge and these excellent parts. I purchased my 2021 wrangler about three months ago. Completely stock with only 11,000 miles it had death wobble. The dealership told me they couldn’t fix it, so I have been following your videos on how to solve this problem myself. After replacing the track bar (which helped), I found this video and decided to give it a go. This tightened up my steering and solved my death wobble. I can’t thank you enough. I can keep my Jeep now.
@wayalife
@wayalife Год назад
Awesome, I'm happy to hear our video was helpful to you and that you were finally able to get your Jeep working properly again.
@jimsather6892
@jimsather6892 4 года назад
This video has been up for a while but I still wanted to say thank you! While the install isn't hard, your video made it even easier, like follow the bouncing ball... You have the perfect balance of showing the key steps and keeping it informative (like torque settings, etc) while not being exhaustive and boring. Anytime I can avoid putting my reading glasses on for an install, I give a big thumbs up. So thanks again!
@hunt4life56
@hunt4life56 3 года назад
I just want to thank you for your video's. You seem to not forget the small details that others leave out. I learn a lot form each one you do! Even the one's that i really don't need but glad you put them out anyway. I always learn something new!
@wayalife
@wayalife 3 года назад
Happy to hear it, thank you 👍
@01btg
@01btg 4 года назад
I love your videos. thanks for continuing to post. Helps me feel a lot more certain about work I am doing on my 19 Wrangler JLUR. Wish I had a shop like yours and not just my garage.
@wayalife
@wayalife 4 года назад
Awesome! So glad to hear we're able to help you out in this way :)
@lesszabo5625
@lesszabo5625 4 года назад
After reading an article on this product from Synergy I ordered one for my jt before I even took possession of it. Since I was putting 37's on it I felt it would be a good idea. Next I'll get one for the jlu. Thanks for the video of the install.
@daveschlossberg5138
@daveschlossberg5138 4 года назад
Les Szabo 🤘🏽
@wayalife
@wayalife 4 года назад
Very cool :)
@sorenmelchior
@sorenmelchior 4 года назад
I may have to do that as well (my 2door JLR is being made at the factory now), but I am not upgrading to 37's until I get 5.13 gearing installed. But I plan on inspecting my steering on my 2020 before I make a final call on the bracket.
@jaysteinfort1
@jaysteinfort1 4 года назад
Great video, Eddie! I installed the track bar and sector shaft brace on my JK after chasing a dead spot in the steering. Two things from synergy solved and significantly improved the driving feel. These braces and I put a single plane tie rod end on my synergy drag link pitman arm side, which eliminated flop. Edit: I think synergy drag link now includes this tie rod end. What I had found was there was a significant amount of deflection when steering on the end of the sector shaft. I measured it with a dial gauge at the time but forget the values. The brace all but removed that deflection and the dead spot in steering is gone. I would highly recommend these products from Synergy!
@bobbyfanman1734
@bobbyfanman1734 3 года назад
Wow! Outstanding tutorial, just excellent. Great camera work, your video makes it so easy to see what you are doing, no fluff and wasted talk, great job. I just got a new JT Gladiator and the steering is driving me crazy, so glad I found your video. Thank you very much.
@wayalife
@wayalife 3 года назад
Glad it was helpful! 👍
@clintonstewart3451
@clintonstewart3451 4 года назад
I installed this on my JL last week. Its definitely a must have upgrade. Great video.
@wayalife
@wayalife 4 года назад
Awesome :)
@ronvillanueva8768
@ronvillanueva8768 4 года назад
Is your JL also have like sticky steering on hot summer days ?
@dennisneu8864
@dennisneu8864 4 года назад
It's funny; didn't even know about this product until I was reading about tightening up the steering so when I search for the part your video came up. Thanks a ton for such a detailed vid and even the link to the giant socket.
@wayalife
@wayalife 4 года назад
Glad you found us and glad we could be of help to you :)
@lastminutetravels3034
@lastminutetravels3034 4 года назад
love the attention to detail in your videos. A very good step by step instructions on how to install a very well MADE IN THE USA product.. Thanks guys
@wayalife
@wayalife 4 года назад
Thank you. We're so glad to hear you enjoy our videos :)
@chrisjones2252
@chrisjones2252 4 года назад
Another great install video. Had my brace already because i did notice steering deflection with my lift and 37" tires. Just gotta find time to put it on. Will be on before Winter 4x4 Jamboree. Happy Holidays Eddie and Cindy.
@wayalife
@wayalife 4 года назад
Awesome :)
@epho4772
@epho4772 4 года назад
I just want to say thank you for step by step fully detailed instruction video including torque specs. 👍🏽 most install videos skip those. Again thanks.
@wayalife
@wayalife 4 года назад
Glad we could be of help :)
@epho4772
@epho4772 4 года назад
Wayalife just a quick question in the instructions it recommends a 2” bump stop if I have factory track bar. My Jeep Gladiator Launch edition is already 2” lifted from factory. If I add 2” bump stop I have almost no more travel left in the spring. Is that normal, or should I not add the bump stop?
@elih9588
@elih9588 4 года назад
I came for the good info, I stayed for the super sick unboxing edit! Thanks for all the good camera angles and torque specs, you rock.
@wayalife
@wayalife 4 года назад
LOL - thank you, so glad you enjoyed it :)
@DonatoXlll
@DonatoXlll 4 года назад
I'm still a month away from taking delivery on my Gobi JTR and already tempted with mods. Great vid, thank you !!
@wayalife
@wayalife 4 года назад
Awesome, glad to hear we can be of help to you :)
@jlopes68
@jlopes68 4 года назад
Purchased and installed. WOW huge difference! i would highly recommend this upgrade, once installed, you will be very pleased by the outcome.
@wayalife
@wayalife 4 года назад
Awesome! Glad to hear it made a difference for you as well :)
@frankdevries6988
@frankdevries6988 4 года назад
Thanks for a great how to video. Awesomely informative, and top shelf video editing! Before this I was planning on having a shop do the work. I'm definitely doing this job myself.
@wayalife
@wayalife 4 года назад
Frank DeVries awesome! So glad to hear we could be of help to you 👍🏻
@BrianShipley
@BrianShipley 4 года назад
I've ran the brace for two months now...no issues what so ever. Great video Eddie!
@wayalife
@wayalife 4 года назад
Glad to hear it
@C8sorbs
@C8sorbs 4 года назад
Ordered mine last week, before this video, and glad that I did too cuz when I tried to order the Synergy Track Bar after your last video it’s now back ordered into late December! As usual, great video!!!
@wayalife
@wayalife 4 года назад
LOL - Glad to hear you got your hands on one before they all sold out :)
@C8sorbs
@C8sorbs 4 года назад
Wayalife Fingers crossed 🤞because this looks like a winner!!! Thanks for putting this video out. You’re always helping out the community, bigly!
@roamingwithrob7179
@roamingwithrob7179 4 года назад
So aggressive with opening the box. Seems like a pretty easy install. Thanks for sharing.
@wayalife
@wayalife 4 года назад
LOL - glad you found the install to be informative :)
@zacharyfike1071
@zacharyfike1071 4 года назад
Good stuff Eddie. I plan to run the whole Synergy set up including this bracket on my Gladiator Rubicon.
@wayalife
@wayalife 4 года назад
Awesome :)
@gabrielyong9223
@gabrielyong9223 4 года назад
Great job Eddie.Now you have sturdy steering and toughest part for your next journey.And make sure you keeping warm during snowy season.Keep ot up buddy.
@wayalife
@wayalife 4 года назад
LOL - thanks :)
@jimbogas
@jimbogas 4 года назад
Just put this on. I felt that it stiffened up the steering. Great video as always!
@wayalife
@wayalife 4 года назад
Awesome, glad we could be of help! :)
@oldschoolmoto
@oldschoolmoto 4 года назад
way cool eddie not only do you have killer rigs and killer wheeling on your channel you have the most informative diy vids on the tube thanks
@wayalife
@wayalife 4 года назад
Awesome, so glad to hear you enjoy our videos :)
@anthonygendron9737
@anthonygendron9737 4 года назад
This is exactly what I need on my Gladiator. This thing sways back and forth in the worst way. Thank you for making this video!!!
@wayalife
@wayalife 4 года назад
Awesome, glad we could share this with you :)
@brian8978
@brian8978 4 года назад
Anthony Gendron this bs shouldn’t jeep fix that issue
@anthonygendron9737
@anthonygendron9737 4 года назад
Brian Rascon I agree but we all know how the dealership works.
@holylick5522
@holylick5522 4 года назад
Your videos are awesome. I think this is just what I need for my new JT to stop the wondering wheel. Thanks again for the great videos.
@wayalife
@wayalife 4 года назад
Before you buy this, try letting some air out of your tires and run them at a more reasonable psi. Something like 28-30 psi.
@terrystotzheim9719
@terrystotzheim9719 4 года назад
Another awesome install video Eddie! Seems that Synergy makes some quality accessories for 4x4's! Stay warm! Lots of snow here in Wisconsin!!
@daveschlossberg5138
@daveschlossberg5138 4 года назад
Terry Stotzheim 👍🏽
@rdmitch44028
@rdmitch44028 4 года назад
ordered on sunday, This video is so well done and detailed i will be playing it step by step to my local mechanic as he follows along doing the work. i would do it myself but the tools would cost twice what he would charge. Could not have been able to attempt without this video to show him. Kudos.....again!
@wayalife
@wayalife 4 года назад
Awesome, so glad that we were able to help out. thank you!
@Johnsi227
@Johnsi227 4 года назад
Could you let us know your results?
@rdmitch44028
@rdmitch44028 4 года назад
Johnnysi227 part backordered till June... hoping for the best and will post results.
@kensnyder2340
@kensnyder2340 4 года назад
Good video! You have a really nice shop and the blue Renegade is looks to be almost in new condition. Good thorough install.
@wayalife
@wayalife 4 года назад
Thank you. We have a whole series on our CJ5 where we brought her back to life :)
@frankansley7941
@frankansley7941 4 года назад
Great video--you two always have great lighting and camera angles. Your making me cold with the garage door open to get the good lighting. You were correct, get the heater installed!
@wayalife
@wayalife 4 года назад
LOL - thank you :)
@thewanderer577
@thewanderer577 4 года назад
I don't even own a JL or JT but watched the entire video just cause I enjoy seeing the master at work! Think I'm going to start playing dramatic music like yours when I wrench on my Jeep. 😉
@wayalife
@wayalife 4 года назад
LOL - too cool. Glad you enjoy our videos :)
@gerard0l6569
@gerard0l6569 Год назад
I REALLY enjoy your informative videos! You always get to the point, are direct and video/picture quality and sound is always great which makes for a favorable viewer experience! You also give alot of important steps and torque values, etc.... Keep up the GREAT WORK!! Nice Jeep. I just subscribed
@wayalife
@wayalife Год назад
Thank you. Truly humbled to hear you say such kind words and happy to know that you enjoy our videos.
@edselbritting9792
@edselbritting9792 4 месяца назад
Excellent job, I just purchased the steer smart yeti version, using your video for some tips so it goes smooth, thanks again for sharing your time and knowledge
@eric6650
@eric6650 7 месяцев назад
This video is precisely what my OCD was looking for. That free play is exactly what I was feeling with my 2024 Willys from factory, now even tho it being new, we all know “factory” is what it is. I feel this part with it’s quality construction will definitely give my “free play” a thing of the past(which is what Jeep should have done, bad Jeep).
@bobmccown4588
@bobmccown4588 4 года назад
Looks like a well-engineered support. Definitely adding that to my 'must get' list.
@wayalife
@wayalife 4 года назад
Awesome :)
@stephan5026
@stephan5026 4 года назад
I could watch these install vids all day long! You guys set the standard by specifying socket size and torque specs. I get slightly upset when I watch other ppls vids and they don’t provide that info lol Not that it matters, I wheel with a 97 TJ.. 😂
@wayalife
@wayalife 4 года назад
LOL - thank you. We're so glad you enjoy our videos :)
@OnMyMemoryCard
@OnMyMemoryCard 4 года назад
Synergy is rocking! Well thought out upgrades!
@wayalife
@wayalife 4 года назад
You know it :)
@daveschlossberg5138
@daveschlossberg5138 4 года назад
THANKS Ivan Valvassori !!!
@millstonejeepworx
@millstonejeepworx 4 года назад
Couldn't hold off..LOL. Ordered the brace, heavy duty draglink and tierod, and steering stabilizer relocation kit from Synergy this morning for my JTR. Great sales still going on online from many vendors so took advantage of that.
@wayalife
@wayalife 4 года назад
Awesome! Hoping it all helps you out :)
@jimsdimideas5383
@jimsdimideas5383 2 года назад
Nice job on the video. Appreciate all the details and good lighting/sound.
@wayalife
@wayalife 2 года назад
Glad to hear our video was helpful to you :)
@casey3057
@casey3057 4 года назад
Do I have a JL? No. Does this apply to me? No. Do I watch and comment anyway? Hell yes because Wayalife is the best fucking channel and it’s what you do! Great video as always guys.
@wayalife
@wayalife 4 года назад
LOL - thank you my friend :)
@toddmand6451
@toddmand6451 4 года назад
I’m glad I stumbled onto this channel! You rock! All though I am quite jealous of both your jeeps and tools!
@wayalife
@wayalife 4 года назад
"both" our Jeeps? We have a lot more than 2 :)
@garycraig4277
@garycraig4277 4 года назад
It's been a great year watching your videos Have a Merry Christmas
@wayalife
@wayalife 4 года назад
Thank you. Hope you have a very Merry Christmas as well :)
@greenJLmachine
@greenJLmachine 3 месяца назад
Thanks for making great instal videos! This is my next project for my JLUR!
@wayalife
@wayalife 3 месяца назад
Glad we could be of help to you 😎
@nachovalenti
@nachovalenti 4 года назад
Great job and very good advices as usual. I like a lot the unboxing moment 😁. Thanks Cindy and Eddie.
@wayalife
@wayalife 4 года назад
LOL - happy to hear you enjoy them :)
@1111Overland
@1111Overland 3 года назад
GREAT video. Looking forward to doing this on my friend John’s JL this weekend.
@pauldavey7229
@pauldavey7229 4 года назад
Love Synergy products, looks like I need to add some more to the list.
@wayalife
@wayalife 4 года назад
LOL - awesome :)
@pauldavey7229
@pauldavey7229 4 года назад
@@wayalife My problem is everything is doubled, Iv'e got a JL and a JT. I think I feel some of your pail lol.
@rickwatson1000
@rickwatson1000 4 года назад
One of your best videos Eddie!
@wayalife
@wayalife 4 года назад
Awesome, thank you :)
@dustinparrish8453
@dustinparrish8453 4 года назад
That was a great install video man!
@wayalife
@wayalife 4 года назад
Thank you :)
@millstonejeepworx
@millstonejeepworx 4 года назад
Awesome video! Thanks, already ordered RockKrawler's new 3.0" Pro-X 'no limits' Stage 1 lift for my JTR. Saw this on Synergy's site, and no have added it to my list. Will probably get there draglink and tie rod as well.
@wayalife
@wayalife 4 года назад
I think you'll be quite happy with all of it.
@stevetabor4447
@stevetabor4447 4 года назад
Good stuff Eddie a little bit of play turns into more wear later that’s a must for bigger tires sitting here thinking you be a awesome shop teacher for kids hope you an Cindy an your family have a blessed holiday season as always be safe
@wayalife
@wayalife 4 года назад
Thank you. We hope you have the same :)
@Jeep.Generation
@Jeep.Generation 4 года назад
Nice upgrade. I might need to look into getting this.
@wayalife
@wayalife 4 года назад
I think you'll find it to be quite nice.
@dmboverland1574
@dmboverland1574 4 года назад
Another great video!!! On my list of todo's as I just had dealership finish recall items and one being the steering which doesn't really help... I have been holding off on getting more mods done as dealership has been fixing all of the various issues off an on for about 6 months...
@wayalife
@wayalife 4 года назад
Glad to know our video was helpful to you :)
@bobbymuy989
@bobbymuy989 4 года назад
Thanks Eddie just added this to my Christmas list!
@wayalife
@wayalife 4 года назад
Awesome :)
@sawmanpeters6292
@sawmanpeters6292 4 года назад
Great video. Really helped with my install. Your detail is awesome 😎
@wayalife
@wayalife 4 года назад
We're so happy to hear that our video was helpful to you :)
@stevefife7598
@stevefife7598 4 года назад
Thank you good info. I see they make one for the JK. I'll have to upgrade my JK.
@wayalife
@wayalife 4 года назад
Very cool :)
@IamThatGuy187
@IamThatGuy187 4 года назад
I think you found your new calling, I’ve been enjoying your vids from 2010, I had a 2011 jk. Truly one of the best, to the point install videos on you tube, it’s easy to watch and understand. With a bit of promotion companies will be begging you to do install videos for there products. (If not already done). My 2 cents.
@wayalife
@wayalife 4 года назад
Truly flattered by your kind words. Thank you.
@jonalexanderson5273
@jonalexanderson5273 4 года назад
Its gotta be cold out there for Carharts and Sorel boots. All the power to you. Just getting first snow here in Boston
@wayalife
@wayalife 4 года назад
LOL - yeah, it's been suckin out here :)
@ksudyno
@ksudyno 11 месяцев назад
Thank you for the well organized video and helped out a lot on the installation. For the JK people, there are some differences. The 4 main bolts that hold the bracket on are all the same size There is no nipple for adding lubrication You will need the 42 mm socket just for adding the new bolt. I believe the OEM is a 23...
@turbojunki
@turbojunki 4 года назад
THAT is a brilliant set up!
@wayalife
@wayalife 4 года назад
We're pretty happy with it :)
@kyndred2008
@kyndred2008 4 года назад
like Always you do a great job at showing things done the right way,thank you sir
@wayalife
@wayalife 4 года назад
I really appreciate you saying as much.
@davidbuckles9950
@davidbuckles9950 4 года назад
Great video. You’re a natural teacher.
@wayalife
@wayalife 4 года назад
LOL - you're too kind. Thank you :)
@miguelmarlowe6
@miguelmarlowe6 4 года назад
Nice touch adding the links to the tools used.
@wayalife
@wayalife 4 года назад
Glad you found the links to be useful :)
@kevinnobody3052
@kevinnobody3052 4 года назад
Thanks for the step by step instructions. Nice video
@wayalife
@wayalife 4 года назад
Glad we could be of help :)
@ocampofitfammily1931
@ocampofitfammily1931 4 года назад
Another great install
@wayalife
@wayalife 4 года назад
Thank you :)
@sonnicman
@sonnicman 4 года назад
Eddie, as soon as I saw you with the overalls on, I said yep there's snow on the ground. Got a pair as well and their great for working out in the cold. As for the batteries, I was forced to move mine inside and they work wayyyy better. I hope you both had a great Thanksgiving. Next project is heat in the shop.
@wayalife
@wayalife 4 года назад
LOL - yeah, winter is officially here :)
@sonnicman
@sonnicman 4 года назад
@@wayalife Indeed it is. Got over 20 inches the last two days. Most of the trails you guys ran here in MA are buried in white stuff lol.
@tman560
@tman560 4 года назад
Terrific work-as always!
@wayalife
@wayalife 4 года назад
Thank you :)
@richdatsun8755
@richdatsun8755 4 года назад
Install the one made for my JK, thought it would be good insurance! That one comes with bearing instead of bronze bushing, be interesting how it holds up. Enjoy your videos 👍
@wayalife
@wayalife 4 года назад
Hope to report back after some hard use :)
@briancharles2162
@briancharles2162 4 года назад
Hey Eddie i was catching up on all the recent videos because I graduated from usmc boot camp. The gladiator grew up faster than jetlee (not that I'm complaining or anything). I finished watching the jkx series and started watching the jl/jtx I love the look of the gladiator and it was tempting me to get one (not yet) hope you have a merry Christmas and happy new year Eddie and Cindy. :)
@wayalife
@wayalife 4 года назад
Congratulations on graduating and for serving! Glad you enjoyed our videos and hope you had a wonderful Christmas :)
@samhouston5217
@samhouston5217 Месяц назад
Great video as always. Thank you. Installing that next week. Peace of mind.
@wayalife
@wayalife Месяц назад
Glad to hear you found our video to be useful 👍
@rpmwrx
@rpmwrx 4 года назад
This looks like a vast improvement over the JK sector shaft brace. Looks well engineered and there’s no way for the sector shaft nut to come loose with this setup like it does with the JK brace. It would be great if Synergy could re-design the JK brace so it’s the same as the JL/JT brace. Nice vid as always Ed 👌🏻
@daveschlossberg5138
@daveschlossberg5138 4 года назад
We are working on a revision for the JK brace right now actually. Will be like the JL/JT version you see here when its done 👌🏻
@rpmwrx
@rpmwrx 4 года назад
Dave Schlossberg awesome work. We added a brass bush to replace the needle bearing like the JL brace and it works well. I really like your solution to the sector shaft nut undoing itself. It’s alot neater than what we came up with. Please make some for the RHD market aswell. Keep up the great work.
@Talon1983
@Talon1983 4 года назад
Mine is being installed tomorrow can’t wait to see if it makes a difference.
@wayalife
@wayalife 4 года назад
Hope it helps things out.
@Strizzle81
@Strizzle81 4 года назад
How do you like it? @Family man
@Talon1983
@Talon1983 4 года назад
Matt it’s awesome. Seems like it should be everyone’s first mod.
@cgscprspecialist3937
@cgscprspecialist3937 4 года назад
Always great information happy new year
@wayalife
@wayalife 4 года назад
Glad to hear it, thank you :)
@---rg1gb
@---rg1gb 3 года назад
@wayalife . Love the videos Eddie. I've watched a few of them several times.
@wayalife
@wayalife 3 года назад
Awesome, so glad to hear it! :)
@robertgarcia6385
@robertgarcia6385 2 года назад
Really making me develop a complex….. awesome thanks
@jaypee6877
@jaypee6877 3 года назад
Those overalls are dope
@luisrodriguez3411
@luisrodriguez3411 4 года назад
Great video Eddie I'm running Synergy components as well very solid.
@daveschlossberg5138
@daveschlossberg5138 4 года назад
Luis Rodriguez 👍🏽
@wayalife
@wayalife 4 года назад
Awesome :)
@jim6682
@jim6682 4 года назад
Great detailed video as always. Thanks
@wayalife
@wayalife 4 года назад
Thank you. Glad you found it to be informative :)
@PhatboyHD88
@PhatboyHD88 4 года назад
Hey buddy did ya ever get the body damage fixed yet on the JL? Just curious seeing ya have JT damage to fix now also 😎,,and i just wanna thank you for another great video, i cant believe you don’t have 5 million subs yet , you are in my humble opinion the best 4wd channel on you tube ! Thanks again buddy
@wayalife
@wayalife 4 года назад
Thank you. Truly flattered you would say as much. We actually just picked up our JT from the body shop. Hope to get more videos with it soon. :)
@mikehalstead1139
@mikehalstead1139 4 года назад
You made install look so easy. Some others online have struggled with the sector shaft nut. I'm intrigued. Also hoping you do a video after driving. really want to know if you noticed any difference. Thanks.
@wayalife
@wayalife 4 года назад
Honestly, our steering was nice and tight with just the Synergy track bar, tie-rod and drag link alone. This brace was more like added insurance.
@bradjean4486
@bradjean4486 4 года назад
All I can say is wow jeep way to make a vehicle weaker than previous models before so glad for this info I will be looking into this for 2020 JT
@airtek4809
@airtek4809 Год назад
Very detailed video. Thank you.
@wayalife
@wayalife Год назад
Glad you found our video to be helpful.
@rockingkvideos3160
@rockingkvideos3160 4 года назад
Well done. I’m outgrowing “Rocky” my 09 2dr. Been looking at JL’s and JT’s, was waiting for the diesel but the one I drove with 3.6 8speed was quite a surprise. I’m not in a hurry and will probably follow a lot of your build on both, so these videos are a perfect reference library for me😀. Thanks for sharing. If the diesel were out, would you consider it after all your real life trips putting them to the test?
@wayalife
@wayalife 4 года назад
Awesome :)
@mauricewrangler8554
@mauricewrangler8554 4 года назад
Hey Eddie, great video. Must be nice to no have to remove coil spring! lol Merry Christmas
@johnbrockjr9464
@johnbrockjr9464 4 года назад
I talked with the Tekton guys at SEMA and am getting their Torque wrench soon
@wayalife
@wayalife 4 года назад
Awesome that you got to meet them. Good guys and they make really nice tools :)
@johnd5805
@johnd5805 4 года назад
Vinyl backed fiberglass insulation is a small investment for days like today. :~) . To whoever built the nice shop. With a small propane heater. I'm a metal building estimator and just quoted insulation. lol Great video. When you think how the engine, transmission and transfer cases hold up to the abuse you guys put it through, I'd say Jeep does a pretty good job. More snow videos for us way down south Southerners.
@ElmoUnk1953
@ElmoUnk1953 2 года назад
Good Job as always! 👍
@wayalife
@wayalife 2 года назад
Thank you. Glad you found our video to be helpful.
@grtelli
@grtelli 4 года назад
Love your channel. Stay warm
@wayalife
@wayalife 4 года назад
LOL - thank you :)
@user-io3hw7hx7q
@user-io3hw7hx7q 4 года назад
Awesome outstanding job have a great time thanks
@rustybonesgarage5026
@rustybonesgarage5026 4 года назад
Eddie, I am really liking your shop and the other jeeps you have, what in the heck do you do for a living?
@stovlsuzuki
@stovlsuzuki 4 года назад
@steve timleck kind of makes you want to work for him eh? lol doing youtube and doing what he does has to be a fun job.
@ED-zf6db
@ED-zf6db 4 года назад
You want to ride that D a little harder there Steve?
@SuperThunder911
@SuperThunder911 4 года назад
Another awesome video, thank my brother,more stuff to buy 👍
@wayalife
@wayalife 4 года назад
LOL - I hope that's a good thing :)
@turbojunki
@turbojunki 4 года назад
Man brother, you gotta get some heat in the shop. I’m in the same boat here in the northeast.
@wayalife
@wayalife 4 года назад
LOL - I got heat but it's one of those torpedo types. Works well but is crazy loud and way too much for filming. I've got a real heater as well but just gotta find time to get it installed.
@RealityCheckGA
@RealityCheckGA 3 года назад
Great video . Man you deserve more subs.
@wayalife
@wayalife 3 года назад
I appreciate that! Thanks!
@JeepTJ1999
@JeepTJ1999 Год назад
I’m no mechanic & it’s showing right now. You make this look so easy. I can’t even get past the first instructions. I’m very frustrated right now!!!
@ScottsOutWest
@ScottsOutWest 4 года назад
Consider painting your bolts, especially the 2 holding the sector shaft on the brace, so you can see if/when they loosen. Also, I mentioned to Dave that he should include in the instructions putting some blue Loctite on the 2 bolts that go into the aluminum shaft holder. With heavy wheeling they tend to loosen but the Loctite will solve that.
@wayalife
@wayalife 4 года назад
Check the description on this video, that addendum was already made.
@geofflau3002
@geofflau3002 11 месяцев назад
Great video. I was looking at this and asked my reputable local jeep shop and the tech said this part is more for pre 2018 rigs that had a different material steering box I believe steel vs aluminum. Anyway wanted to get your take as I have a Rancho front track bracket but it’s bottoming out on my axle. The shop recommended trimming the bottom of the bracket vs the synergy bracket and sector shaft combo. Note I do have a full synergy bar kit. Thanks in advance if youre able to chime in.
@wayalife
@wayalife 11 месяцев назад
I would never pretend to know more than your reputable local Jeep shop but pre 2018 was a JK Wrangler and there was no need for this bracket. 2018 is when the JL Wrangler came out and originally, with an aluminum steering box that did have issues warranting a bracket like this. Jeep has since change the box to being made out of iron and that fixed a lot of the problems they were seeing with the aluminum one. That said, I'm not sure I understand what you mean by "Rancho front track bracket" and it "bottoming out on your axle". To the best of my knowledge, Rancho does not make a relocation bracket for a front track bar. Also, is it safe to say that this bracket you have is mounted on the frame and you're saying it's hitting your axle at a full bump? Sorry, just a little confused here.
@geofflau3002
@geofflau3002 11 месяцев назад
@@wayalife thanks for the quick reply. Pleasant surprise while watching another of your install vids. The bracket I’m referencing is the RANCHO FRONT TRACK BAR SUPPORT BRACKET. Sorry for the confusion. The bottom of the bracket has a rounded edge on one side and a more squares off 90 degree on the other. The 90 degree flat side, specially the corner is bottoming out on the base of the sprint mount just lightly above the stock axle of my jt. So the shop said just trim it so it’s out of the way and no need to upgrade to synergy bracket. I hope that makes sense.
@raymondwinans978
@raymondwinans978 2 года назад
Wish I could give the video 5 thumbs up. Great job 👍
@wayalife
@wayalife 2 года назад
Wow, thanks!
@moorechez67
@moorechez67 3 года назад
Thanks, ordered! Any other lesser-known products like this you would recommend for the gladiator?
@duneattack
@duneattack 4 года назад
I see you guys are finally back home....where it's freezing cold.
@wayalife
@wayalife 4 года назад
LOL - "were" back home for a bit anyway. Had to head out again to see some family :)
@xplorefurther
@xplorefurther 4 года назад
Really like the vid. Learn a lot from you. Got my package here waiting to install. Just wonder what grease do you recommend for the sector shaft?
@wayalife
@wayalife 4 года назад
I use Swepco moly grease but really, any moly grease will get the job done.
Далее
치토스로 체감되는 요즘 물가
00:16
Просмотров 692 тыс.
Steer Smarts XD Drag Link & Tie Rod Installation
14:00
Testing 5 Unique Jeep Wrangler Mods!
19:36
Просмотров 252 тыс.
Cylinder Offset Changes Everything
23:45
Просмотров 2,5 млн
transmission    gear box  #automobile #熱門
0:10
Просмотров 9 млн
Оживляем Tiguan втайне от Ильдара!
1:12:26
Корейский мерс | меллстрой
0:15
Просмотров 171 тыс.
transmission    gear box  #automobile #熱門
0:10
Просмотров 9 млн