Тёмный
No video :(

Jeep LJ 1 Ton Project Overview | Superduty Swap, Rubicrawler, Full Traction Long Arm 2019 

Rockquest Off-Road
Подписаться 3,3 тыс.
Просмотров 12 тыс.
50% 1

IT is FINISHED! My dad's newly built 2004 Jeep LJ Sport 1 Ton Build. We go over the features and highlights of the exciting transformation! Please feel free to ask any questions! Take care!
2004 Jeep LJ Sport
4.0 HO Inline 6
4 speed 42RLE Automatic Transmission
NP241OR transfer case
Advance Adapters Rubicrawler 2.72 Crawl Box
Full Traction 6 inch Long Arm with Triangulated 3 link rear
Tummy Tuck Belly Pan Full Traction
38/13.5/R17 Milestar Patagonia tires
17x9 American Racing Ansel Off Road Wheels 5.7 backspacing
Dana 50 front axle shaved for clearance with Artec Truss
5.38 gears, Yukon Grizzly Locker, Mile Marker Hubs
Sterling 10.5 rear axle
5.38 gears, Yukon Zip Locker (Air Locker)
Viair On-Board Air Compressor and 3 gallon tank
Stock Front Bumper with Winch Plate
Superwinch TigerShark 9500 winch
Custom Tie Rod and Drag Link with Chevrolet 1 Ton Tie Rod Ends
#lj #lj1ton #jeepljbuild #fulltraction #milestar #jeepyj #stockjl35s #xj1ton #lj1ton #lj #jlrubicon #jeepbadgeofhonor #jliconlift #yj33s #jl35s
The Jeep Wrangler Unlimited or Jeep LJ is a name for the Unlimited version of the TJ. It was only made for the 2005 and 2006 model years. What makes it different is the length. There is an extra 10 inches of length which creates a longer wheel base. You will mostly notice the length when looking at the distance from the rear fender and the front door. The standard Unlimited comes with a limited slip rear Dana 44 axle with 3.73 gearing. This allows for better towing capacity. Off road enthusiasts like this for the beefier rear axle that can withstand more abuse than the standard Dana 35. It also has more locker options than the Dana 35 and can handle a much larger tire size due to a larger in diameter axle shaft. Another advantage of the extra 10 inches would be the greater amount of cargo room. There are some disadvantages as well from an off-roading perspective. The rear approach angle is compromised a bit with the rear axle positioned a few inches forward from the back of the Jeep when comparing with the standard TJ version of the Wrangler. The longer wheel base introduces an issue with rubbing more often on the skid plates that protect the transfer case and the transmission. A larger lift is required to achieve the same angle clearance as the standard TJ.
The Wrangler Unlimited has become a desirable model for those that want the longer wheelbase and plan on lifting it and don't want to modify the standard Wrangler and extend the wheelbase themselves. The longer wheelbase creates more stability and a stronger base for towing. The Jeep LJ can tow a significantly larger amount than the Standard TJ.

Опубликовано:

 

6 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 56   
@CarsAndKracl
@CarsAndKracl 4 года назад
There are so many days I regret getting rid of my LJ. Nice build!
@rockquestoff-road2839
@rockquestoff-road2839 4 года назад
Thank you so much!! I know that feeling but hey life happens 👌🏻I have kids so the 4 door works best for me for sure 👍🏻I will love watching my dad in his LJ for sure though 🔥
@jeepn0811
@jeepn0811 3 года назад
Same. I miss mine. This is an awesome clean build
@yz125rider194
@yz125rider194 3 года назад
Anyone wanna buy one I have one on par with this build bit with Koa coil overs
@JeepTJWheelin
@JeepTJWheelin 4 года назад
A tremendous build for a worthy Jeep.
@rockquestoff-road2839
@rockquestoff-road2839 4 года назад
Thanks man!
@jeshuaoffroad9791
@jeshuaoffroad9791 4 года назад
Jesus this is absolutely beautiful I regretfully just sold my red Tj. But I acquired a 2018 jk but nothing will compare to a Tj or an lj in my eyes
@rockquestoff-road2839
@rockquestoff-road2839 4 года назад
Too true...my dads LJ is so classic and has so much character...although with 2 kids my JL is definitely better for my situation...but it would nice to have both heheh
@cgscprspecialist3937
@cgscprspecialist3937 4 года назад
No flares looks awesome just like it is
@rockquestoff-road2839
@rockquestoff-road2839 4 года назад
Thank you! Really like the stock look too and after testing it everything fits perfectly...thanks for the input
@stevensrspcplusmc
@stevensrspcplusmc 4 года назад
I’m with you and your dad.. I like the lines of the Jeep stock fenders and flares.. nice build 😊👍
@rockquestoff-road2839
@rockquestoff-road2839 4 года назад
Thanks man!!! Appreciate the kind words!👍🏻
@justinm.791
@justinm.791 4 года назад
Beautiful Jeep, I hope we get to see it in action!!!
@rockquestoff-road2839
@rockquestoff-road2839 4 года назад
Absolutely!! Loved our first short trip with it and looking to go again soon! ✊🏻
@nathanmciver6496
@nathanmciver6496 2 года назад
One of the best lifts I have seen! I would like to accomplish this at some time possibly, I just know the requirements! Nice to hear you had no issues with driving the vehical at a 6" lift! I could tell by the tire stance and everything else that you probably wouldn't have any issues! Like you said, the geometry looks as it should! Really nice vehical
@rockquestoff-road2839
@rockquestoff-road2839 2 года назад
Thank you man!! Glad you enjoyed it and found it helpful! We love this lift!!
@kyridgejumper
@kyridgejumper 4 года назад
Awesome so glad you have posted it please keep up on the updates
@rockquestoff-road2839
@rockquestoff-road2839 4 года назад
Absolutely!!! Can’t wait to wheel it and go on some adventures!!!
@matthewhatton3637
@matthewhatton3637 4 года назад
Love it a lot cleaner looking then the XJ was 🤙
@rockquestoff-road2839
@rockquestoff-road2839 4 года назад
Ty man!!
@ryansremark6983
@ryansremark6983 3 года назад
Those booger welds though...
@rockquestoff-road2839
@rockquestoff-road2839 3 года назад
Hahah yep some of them are not pretty but they are strong lol
@jamesray3920
@jamesray3920 4 года назад
Nice lj i didn't know you still can get a full traction 6in long arm lift kit i own a 2005 lj rubicon wrecked that looks completely different i also have a full traction 6in long arm lift hard top altas twinn transfer, sitting on 35x12.50 Mickey Thompson arb roof rack arb bull bumper 9.0 rc warren winch and hanson off road full wrap around basket jerry can holder with swing out tire carrier, i started sagging on back due to weight i bought a pair of rc spring correction plates ans acos adjustable spring mounts turns out i really didn't need acos with zero adjustment on acos and rc springs correction that a long add a 3.5 inch liftt rear i highly recommend the rc rear spring correction plates it will take a lot of the curve out of the spring and add some lift My lj to me it the last real all metal body old school i also have a sprintec supercharger like you im still working out some bugs i keep blowing my tps throttle position sensor, and my question is with the full traction 6inch lift do you feel a sway when driving ive own many tj this first jeep i had a lift on the jeep and not sure what to expect when driving i live texas i bought many of the things on my jeep before i bought the jeep so true on full traction and hanson off road it will take long time to get any parts due to not popular in the jk or jl era but it dose feel good to be the odd ball not the cookie cutter look i also installed black magic big brakes on front and trying to find the exhaust system that was specially made for 6in will never be made again but the small muffler was not made from full traction but made by( spin tech) you can still buy this muffler nice to know old school still alive and well a look from many years ago i buid my jeep for overlanding Let me know about your ride feel.if you have any sway i get nervous over 65 mph i will put a RU-vid viedo up in near future
@rockquestoff-road2839
@rockquestoff-road2839 4 года назад
So cool man! Sounds like a really cool build...I do not have any sway on the rear...my guess would be worn bushings on the wishbone on the rear or the heims are worn...anything loose at all will let the suspension move side to side which would make it feel loose in the rear...hope you track that down soon! Love being unusual and have different parts that not many people use! So fun!
@jhinton088
@jhinton088 Год назад
Gorgeous build! One of the cleanest ljs ive seen i love it. I have a 98 tj same color and i hope it looks half as good when im done. I had a question not sure if youll see but is there a reason you went with a y link steering and not a high steer setup with separate high steer arm? Thinking maybe not enough lift to run high steer but not sure which handles better. Im in the process of setting up steering with a full 67wms axle on 4.5 inches.
@rockquestoff-road2839
@rockquestoff-road2839 13 дней назад
Hey!!! Thank you for the kind words! The high steer required a lot more work to the knuckles and steering box. This was simpler and cheaper.
@jhinton088
@jhinton088 13 дней назад
@@rockquestoff-road2839 hey thanks for the response!
@zsickpuppy
@zsickpuppy 4 года назад
Did you narrow the the new axles or did you run them at the full width ?? The stance on that jeep looks good. Nice job, good looking jeep.
@rockquestoff-road2839
@rockquestoff-road2839 4 года назад
We ran them full width...the front is a 99-2004 Superduty/Excursion Dana 50 which is 69.25 inches WMS to WMS (wheel mounting surface)...the 99-2004 Dana 60 is the same width and the rear Sterling 10.5 we used is from a 2005 F350...it is 70 inches WMS to WMS...we used some American racing Ansel Off Road wheels in the 8x170mm lug pattern with 5.7 inches of backspacing to tuck the tires in as much as possible because we didn’t want it to look super wide 👍🏻thank you man! Appreciate the kind words!
@TrentsGarage
@TrentsGarage 3 года назад
That's a 4 link in the back FYI. The 3 link is up front.
@rockquestoff-road2839
@rockquestoff-road2839 3 года назад
Well actually its a solid wishbone upper in the back....the front suspension is 4 link with a track bar 👍🏻
@kevinclaypool6345
@kevinclaypool6345 4 года назад
Seriously boss project.
@rockquestoff-road2839
@rockquestoff-road2839 4 года назад
Thank you Kevin!!
@kevinclaypool6345
@kevinclaypool6345 4 года назад
@@rockquestoff-road2839 Seriously man yall have done some phenomenal work with this suspension. If you and your pop started a 4x4 shop yall would be INUNDATED with people wanting work done
@rockquestoff-road2839
@rockquestoff-road2839 4 года назад
Oh man that has always been my dream that never quite came true...but you never know ;) we do some work with friends or friends of friends on occasion...it is really fun
@trsoff-road321
@trsoff-road321 4 года назад
Why the dana 50? Out of curiosity
@rockquestoff-road2839
@rockquestoff-road2839 4 года назад
Just to be different 😁...everyone runs 60s for obvious reasons...found a great deal on this 50 with 5.38 gears already in it and a locker...it is basically a Dana 44/60 hybrid...dana 44 size pinion with a 9 inch ring gear....dana 60 outers, U joints and knuckles...reverse rotation high pinion and you can shave it for quite a bit more clearance...it’s heavy but not really a big deal overall...we used a Artec 60 Swap bracket kit which fit almost perfect...we only ever broke a stub shaft on our stock dana 44 front end in our XJ build with 37s so it should hold up great for what we wheel!
@eddietuckerjr.2858
@eddietuckerjr.2858 4 года назад
Why did you decide to go with the Full Traction long arm instead of some other newer designs? Just curious...I'm not trying to flame FT or anything.
@rockquestoff-road2839
@rockquestoff-road2839 4 года назад
No problem man! We just wanted to try because no one else was running them anymore these days...the 3 link rear with wishbone design is also 1 of a kind...I think Teraflex and others have great 4 link triangulated setups and axle truss mounting configurations but we ended up just trying it to be unique and we like the wishbone...customer service and the ordering process was HORRIBLE and the owner is ridiculous so I would not buy FT again or recommend it to anyone...but the kit itself with some mods and adjustment is superb and has so torque raise or sag...really nice geometry and road ride at 70 is amazing...can’t believe how stable with one tons and 38s...rides really soft too
@eddietuckerjr.2858
@eddietuckerjr.2858 4 года назад
@@rockquestoff-road2839 I read a ton about how bad the customer service is. But, I like you said, there are plenty of people who say good stuff about their kit. If you don't mind me asking, what problems did you run into with them? I am trying to decide to take the plunge on their 4" LA kit.
@rockquestoff-road2839
@rockquestoff-road2839 4 года назад
It took around 6 months to get the kit finally...and they said the shocks were on back order from bilstein...we called and checked over several months and the owner said the same thing every time...we looked up the part numbers and got them on amazon and called bilstein and they said there were no issues getting them at all...weird...they would not refund the shock order and kept saying they would send them when they got them...finally got them to refund a month later
@rockquestoff-road2839
@rockquestoff-road2839 4 года назад
So if you just get the kit itself and be prepared to wait for several months you won’t be disappointed in the quality of the parts for sure...it’s just a matter of sticking it out 👌🏻
@JeepAroundTexas
@JeepAroundTexas 4 года назад
Sweet build, what part of Texas? I’m in Waxahachie 35 miles south of Dallas.
@rockquestoff-road2839
@rockquestoff-road2839 4 года назад
Thanks man! We are in Tyler! You are not too far away!
@JeepAroundTexas
@JeepAroundTexas 4 года назад
Rockquest Off-Road not far at all! We go to Mount Barnwell to play sometime. Check out our Jeep Around Texas FB group if you get a chance.
@rockquestoff-road2839
@rockquestoff-road2839 4 года назад
Absolutely!
@GorillaSRT8
@GorillaSRT8 3 года назад
Love this build! How does it handle on the road? Slow and sluggish with the one tons or is it hardly noticeable ? TIA!
@rockquestoff-road2839
@rockquestoff-road2839 3 года назад
It drives really well!! It’s more loose on center as far as the steering goes but it’s just something you get used to. The Jeep corners really flat and the rear end is never torquing or flexing on corners or hard acceleration...really surprised me how well it works with the rear wishbone 3 link and no track bar or sway bar...it stops extremely well but that’s just because the 1 ton brakes are so much larger...the stock master cylinder works perfect with the larger brakes. Drives straight and true at 70. As far as power goes it’s really about the same on acceleration which was never anything to write home about stock...with 5.38s the acceleration is stock strong...at Highway speed is where you notice more though...pulling hills at 60+ requires a downshift or 2....the 42RLE has such a deep overdrive ratio that stock it struggled up hill too...If you could run a 14 bolt rear or dana 60 rear and a dana60 front perhaps you could get 7.17 gears that would make overdrive usable but we think it’s just unnecessary...we just turn OVerdrive off on the dash and it handles hills at speed much better...you can choose to put overdrive back on for downhills but we don’t drive Highway much in it...hope that helps!
@GorillaSRT8
@GorillaSRT8 3 года назад
@@rockquestoff-road2839 thanks for the quick response! I’m thinking about going with SD 60 and sterling 10.5 rear. I have a 06 LJ rubicon with stock motor @46k miles. 6 speed transmission. My main concern was the added weight and the engine struggling with the bigger axles. Sounds like road manners are still good and acceleration is about the same, so that is a relief since I do daily it
@rockquestoff-road2839
@rockquestoff-road2839 3 года назад
@@GorillaSRT8 Awesome Jeep man 46K miles wow!!! It will drive so nice on tons you will not believe it!
@GorillaSRT8
@GorillaSRT8 3 года назад
@@rockquestoff-road2839 just placed an order on all the parts including wheels with 5” BS. Going with race line beadlocks. Are you still using the stock brake master cylinder?
@rockquestoff-road2839
@rockquestoff-road2839 3 года назад
Man going beadlocks right away is the best plan...in hindsight that’s one thing we would have done differently. Yes we use the stock master cylinder and it’s perfect. People are always talking about changing master cylinders and capacity etc. but we have had these axles on a stock Cherokee with the stock brake system and now this LJ with stock brake components and it works perfect...you will be surprised how much better it stops than stock on baby tires lol
@mgkeleher
@mgkeleher 4 года назад
I think the word your looking for is "anti-squat"
@rockquestoff-road2839
@rockquestoff-road2839 4 года назад
YES thank you haha it’s hard sometimes when your filming to remember the right phrase😁
Далее
TJ/LJ *FLAT BELLY* Rock-Link Long Arm Install
17:36
Просмотров 3,4 тыс.
Fake watermelon by Secret Vlog
00:16
Просмотров 3,1 млн
لدي بط عالق في أذني😰🐤👂
00:17
Просмотров 4,6 млн
Dennis's LJ | TeraFlex
15:38
Просмотров 25 тыс.
How Much Did My “Junkyard” 1 Ton Swap Cost??
24:05
One Ton Axle Swap Beginner’s Guide - Jeep Axle Swap
18:23
Llamazeen Gets a Dana 60
16:56
Просмотров 25 тыс.
Stretched Jeep LJ Build Gets Homemade 1 Ton Axles!
25:10
An LJ Named "Sulley" Overview
7:33
Просмотров 62 тыс.
Doolan's Tracer Jeep LJ Build | GenRight Off Road
3:57
Fake watermelon by Secret Vlog
00:16
Просмотров 3,1 млн