No video :(

JEEP WJ ADJUSTABLE REAR LOWER CONTROL ARMS - MXR PRODUCTS FOR YOUR 99-04 GRAND CHEROKEE

Подписаться 31 тыс.

Просмотров 22 тыс.

50% 1

Huge Thank you to MXR for supplying me with adjustable rear lower control arms to fix the rear steer issue on my Jeep WJ. The Green Hornet is finally a Driver!! #Jeep #Grandcherokee #WJ #controlarms
@MaXpeedingRods.
Rear Control Arm link：bit.ly/3n1wZUI
Coupon code: PDH--get 15% discount for all orders.
WJ DEATH WOBBLE? TRY A MOOG RK660669 Track Bar - amzn.to/32riQXu
MXR ADJUSTABLE REAR LOWER CONTROL ARMS: DanH--get 15% discount for all orders
www.maxpeeding...
WATSON SYNTHETICS
Use Discount code DANH10 for all your Watson Synthetics products!
www.watsyn.com/
TOPDON BATTERY TESTER - amzn.to/3uEH9NE
BUDGET BOOST LIFT:
Rough Country 2 inch Spacers (WJ) - amzn.to/3qVPYlj
Rough Country N3 2 inch Front Shocks (WJ) - amzn.to/38cQh2o
Rough Country N3 2 inch Rear Shocks (WJ) - amzn.to/3p1sWrr
Daniel 2.20 Blessed be the name of God forever and ever for All wisdom and power are His.
Hey, what’s up, guys? I hope you enjoyed another project. Please remember that this video product is meant for entertainment purposes only and intended for people of driving age, and that is not “made for kids”. Also Please Keep in mind I am not a professional and I have no professional training so don’t try this at home. If you decide to modify or fixing your own vehicle please keep it legal, roadworthy, and most importantly SAFE. Thanks for watching and I’ll see you on the next project! ✌

Опубликовано:

18 апр 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 130

@domprovo7863 3 года назад

I love all of these videos, can’t get enough!

@ProjectDanH 3 года назад

Thanks Dom!

@josephsalemi6272 10 месяцев назад

nice work! I just paid for my 04 Grand Cherokee to have all this done. 282K on the body!!! it feels amazing to drive. great video.

@ProjectDanH 10 месяцев назад

That is awesome! Keep it going!

@stormtrooper_jeep_zj 3 года назад

@Dan H, When changing out control arms in the future, remember to leave them hand tight at the mounting locations then proceed to torque them down with the vehicles weight sitting on the ground. That way there us no presprung movement preventing articulation in the future or premature wear on the new bushings. This is especially helpful when using poly bushings to prevent unnecessary squeaking.

@ProjectDanH 3 года назад

yes! your absolutely right! I knew I missed something! thanks for the comment!

@SuncoastCreate 3 года назад

Your gonna want to look at that V shaped center control arm as well. Ball joint or something in the middle too

@ProjectDanH 3 года назад

Oh yeah buddy That a arm is definitely getting changed soon!

@mikekoerner1614 3 года назад

Love the channel. Just got these control arms in the mail, waiting on the upper for my wj. Keep the videos coming!

@ProjectDanH 3 года назад

Thanks! Will do brother!

@GoatOffroad 3 года назад

Glad you like MaXpeeding Rods! And that they hooked you up! Su-Weet!!! 🍦🍦🍦 Great video! ❤️🐞

@ProjectDanH 3 года назад

Thanks Bug! They definitely came through for me big time!!! 🍦🍦🍦

@outdoorsmansgarage 3 года назад

I do know that the yellow color on those things would have bothered me that much I'd have to paint them but I guess it's all up to personal preference nice job Dan

@ProjectDanH 3 года назад

Thanks brother! No yellow for me... this jeep has already attracted enough bee's 🤣

@danhambrick6331 3 года назад

Nice job Dan.I don't blame you for painting them black...😂😂👊

@ProjectDanH 3 года назад

Lmao... Thanks buddy! Yellow... Yuck!

@jaysmith5084 3 года назад

He should have scuffed them up because shiny paint doesn't stick to a shiny surface .

@ProjectDanH 3 года назад

@@jaysmith5084 I don't care that much 🤣

@DEInTheGarage 3 года назад

I need to get me some of those! They sent me an a-arm for Ruby months ago, but I havent had time to put them on. That is turning in to one sweet WJ, Danno... Jealous!

@ProjectDanH 3 года назад

we should do an A Arm collab vid!

@erinchen2292 3 года назад

Awesome! Thank you so much for bringing such a wonderful video, kudos to you!👍👍

@ProjectDanH 3 года назад

Thank you for the cooperation! 1 more video to go!!

@johnweber4169 3 года назад

Nice looking lower control arms. Those old busings were done. Definitely better in black. I feel your pain when wrenches are turning and rust dust is falling.

@ProjectDanH 3 года назад

Thanks for the support brother! What rust plagued part of the country are you from? lol

@johnweber4169 3 года назад

@@ProjectDanH Kansas. Although I don't think we get it like the North East but that orange locktite and crumbling rust chunks do happen here as well.

@ProjectDanH 3 года назад

@@johnweber4169 That's a damn shame!

@edzimdahl1158 Год назад

And the proper time to tighten all the nuts and bolts is AFTER wheels back on and set back down, give a couple real good shakes and rocks,,, then tighten everything

@myjeepwjarebuildpaulsteven7986 Год назад

Another great Video Dan. I have decided to change out mine with adjustable. Having some trouble with centering and aligning rear axle ✅🇺🇸

@brackoncorbridge1966 3 года назад

Wish I got free hook ups for my wj man I might be a little jelly. Don't forget to change your rear upper control arm.

@ProjectDanH 3 года назад

Lol.. I replace it as soon as I can find some free ones!

@RobertWilliamsSr 2 года назад

Watching that rust fall off while you worked reminds me of my WJ - any time I had to hit it with a hammer chunks would fall off :)

@ProjectDanH 2 года назад

lol!!! north east vehicles are decaying

@VaporheadATC Год назад

You worked a little harder then you needed too. You can remove the old control arms without remove the tire nor lifting the Jeep up. The only time I needed to lift the Jeep up was to align the mounting holes with the new control arms. You can do this instead of trying to fight a ratchet strap.

@r.weaver3769 3 года назад

Increasing length of front lower control arms from stock, will increase caster reducing death wobble and adding stability on highway (think Mercedes, higher caster, more stability at highway speeds). Did that at Alignment shop I worked at, on a lifted 4x4, all of the sudden I was the guy for lifted vehicles, and all I wanted to do was work on Mercedes...LOL. Ratchet straps, gotta love'em

@ProjectDanH 3 года назад

You're absolutely right! I figured it replace all the worn parts first, then i can dial in the arms as needed. thanks for the comment!

@cliff400 Год назад

But it will increase pinion angle also so can't get much increased caster there or you'll kill that ujoint

@alexchliwnyj5941 2 года назад

Wow another example of Jeep quality engineering. What were they thinking with those stupid oval rubber bushings. I bought my first Jeep, a 2003 Grand Cherokee because it was already setup to tow behind the motor home. Now I know why it was so cheap. Yesterday when I pulled the wheel to do brakes I saw that the rubber bushings were loose in the front and rear suspension. At 150,000 miles the suspension is shot and all the control arm bushings are shot. Thanks for the video at least I know how easy it is to replace everything.

@ProjectDanH 2 года назад

Rubber bushings are standard in the automotive industry, they provide a very comfortable ride and deaden vibration. unfortunately they wear out over time.

@smitty4699 3 года назад

harbor freight fixed the jack stands. Their jacks are awesome. I have 2 of the Daytona ones. Beasts

@ProjectDanH 3 года назад

Oh Man... They straight up lied to me.. the Selden store told me it was gonna be another year before new ones were released.. I got 90% cash back and left

@smitty4699 3 года назад

@@ProjectDanH i stand corrected. I returned my old ones and they were out of stock on the replacements when i brought them back last year. I never remembered to try and replace them and figured they must be in stock by now but I just checked the website and they arent! I have the 6 ton ones from HF that werent affected by the recall and I use them all the time. There was a casting issue with the recalled ones where the teeth werent made long enough.

@ProjectDanH 3 года назад

@@smitty4699 I heard they used inconsistent drill bit sizes to bore the hole for the lock hinge.. That would be a reason why some teeth aren't one enough... I guess that makes sense

@abstract1dea 3 года назад

Everything that breaks is an opportunity for an upgrade!

@ProjectDanH 3 года назад

Bingo!

@user-hf4zv6zw2r 7 месяцев назад

I’m gonna order mine , and I have my black rattle can ready to change that color lol

@davismusk9687 3 года назад

Saving another WJ.....good job!

@ProjectDanH 3 года назад

Thank you sir!

@DEInTheGarage 3 года назад

You need an Nebraska Nut Rounder for that jam nut!

@ProjectDanH 3 года назад

I know!! my biggest one was was a 16th too small!!! time to invest in new but rounders

@Greg-qs2jp Месяц назад

I know this is a old video of yours but aren't you supposed to put red lock tight on the threads so the jam nut don't back off over time.

@peteestrada8829 3 года назад

You may not to take the trip, but there are about 10 premium looking Jeep Commanders here in SA. 🍻

@ProjectDanH 3 года назад

Hmmm. I love a good XK 😍

@gregj.gotham4402 2 года назад

Check your upper 3 point link. Where are ya in NY I’m in central NY right off 81 Tully NY Great you fixed it but still check the 3 point upper I had to replaced mine turned out to be a big job.

@ProjectDanH 2 года назад

Yes I have a spare ready to go! Eastern Long Island 🍻

@TiMeToRn- Год назад

What's the point of doing adjustable control arms if you're just going to set them to the same length as the stock control arms? Why not just get stock control arms at that point? If it's lifted, shouldn't it be longer?

@ProjectDanH Год назад

So I can adjust them whenever I want. Lol. Needed to do the rear upper ball joint with a spacer before I dial in the control arms

@robertgrauman8602 3 года назад

Nice. I've got all 8 control arms on order for my ZJ. They're not adjustable like those, but to each their own.

@ProjectDanH 3 года назад

awesome! I don't care what style they are as long as they work! lol

@EverydayOffRoad 3 года назад

Good choice to paint those arms. Cheddar-yellow is not becoming on your WJ. BTW 6ton jackstands are perfect for lifted Jeeps. Good job.

@ProjectDanH 3 года назад

Lol! Sharp cheddar! I returned the stands and got 4 6Tons from auto zone 👍

@jesusrperezd Год назад

My WJ is 2.5 lifted with boot booster, How can I know how much extend /distance I need? if they are going to be the same length of stock why buy adjustable ones?

@ProjectDanH Год назад

so you can make adjustments to your ride.. trial and error.

@edman1015 3 года назад

Great Job Dan

@ProjectDanH 3 года назад

Thanks brother 💪

@uriluzifer Месяц назад

hello mister Dan, I have a question. Not long ago you installed the side members made in China on the bottom rear of your WJ. Are you satisfied?? Greetings from Switzerland

@willd3808 2 года назад

hey buddy i think you got some jeep on your rust

@ProjectDanH 2 года назад

LMAO! I THINK YOURE CORRECT!!!

@1611AuthorizedVersion 3 года назад

Well done sir, excellent video.

@ProjectDanH 3 года назад

Glad you enjoyed it!

@codyc820 9 месяцев назад

How have these held up from MXR? Looking to buy a set but not decided on the cheaper route, my WJ has a small 2.5" lift.

@ProjectDanH 9 месяцев назад

Not too bad.. I'm gonna be repainting them soon

@13yearsaprepperr.jtilbury.51 3 года назад

they look flash Dan ,,, Black with a dan sticker would be my vote

@ProjectDanH 3 года назад

great idea brother!

@misstransgender 3 года назад

awsome job

@ProjectDanH 3 года назад

Thank you

@hauptsache_4x4 3 года назад

You only have to tighten the screws when the vehicle is completely on the ground again.

@ProjectDanH 3 года назад

yes

@hotroddinlogan1043 3 года назад

You need your steering wheel aligned Dan? Lol

@ProjectDanH 3 года назад

HAHA, yea... this thing was all jacked up

@markgabello58 2 года назад

Good job

@ProjectDanH 2 года назад

Thank You

@yoshawnsmith3573 3 года назад

Gotta get me a pair

@ProjectDanH 3 года назад

definitely!

@juggernaut_zj 3 года назад

i love my harbor freight jack it's exactly like snap ons but that's a hell no on my part on their jack stands

@ProjectDanH 3 года назад

yes.. can't believe their quality control was so bad they had to recall something as simple as jackstands

@wadaqabdullah7221 3 года назад

Man I guess you need to extend the control arms little bit

@ProjectDanH 3 года назад

once everything is dialed in I will extend them. 👍👍

@1manmanythings144 3 года назад

You could be feeling alittle shimmy due to those tires being trash. But you probably knew that :o)

@ProjectDanH 3 года назад

Hahaha That's hilarious! Come on man you knew I knew that! 🤣🤣🤣

@misstransgender 3 года назад

is that a touch screen radio

@ProjectDanH 3 года назад

You can touch the screen all you want... but it wont do anything🤣

@simanov25 3 года назад

Hi Dan I bought same brend of arms. But I notice that bushing it's lose. I can spin bushing by hand! Is that normal?

@ProjectDanH 3 года назад

I don't think so. I would check with customer service. bushings should be tightly pressed in

@simanov25 3 года назад

@@ProjectDanH Ok thanks for answer

@1stzjtruck706 3 года назад

I have been using my Pittsburgh jack until my wife bought me a new Daytona 3ton high reach. I have also been using a set of 12 ton jack stands that I got on the parking lot sale for $30. What are you going to do about the rear upper control arm?

@ProjectDanH 3 года назад

nice! I love yard sale tools! I'll probably get up there after after I do the fronts

@victorcruz9785 Год назад

What's the name of the website

@parkerhiggins6023 2 года назад

I put a 6 inch lift on my jeep and now my rear axle moved forward and now I need get the rear axle moved back to put bigger tires on. Will these help move them back more to put bigger tires on?

@ProjectDanH 2 года назад

It possible these could help you with your adjustments. 6 inches is a very large lift on an WJ

@cliff400 Год назад

Probably need adjustable upper control arm as well

@rodom303 3 года назад

Aw hell ye

@ProjectDanH 3 года назад

🤙

@davedonlick2146 3 года назад

Do you think the tires are causing any wobble issues too?

@ProjectDanH 3 года назад

not too likely. usually it's a track bar thing. it's possible bad tires can set off the DW if your track bar is bad.

@nickward891 2 года назад

I was about to order a set of these, but they wanted $193.07 for shipping….. things must be made of lead haha.

@ProjectDanH 2 года назад

OMG.. They are solid... LeAD 🤣🤣🤣🤣

@Therydon 2 года назад

How have they held up?

@ProjectDanH 2 года назад

So far so good!

@Rafu01 Год назад

Have you been happy with the control arms in longer run?

@ProjectDanH Год назад

Yeah!! So far no problems.. Had to torque the nut down twice since.

@Rafu01 Год назад

@@ProjectDanH Ordered some for my ZJ now. Maybe Ill add some mild threadlock while installing..

@michaelangelos5117 3 года назад

Looks like a pipe wrench would have worked out okay for that.

@ProjectDanH 3 года назад

I lent my pipe wrench to my mechanic... Go figure

@peteyjay3761 2 года назад

About how long did it take ya to replace the rear LCA's?

@ProjectDanH 2 года назад

not long, maybe 2 hrs.. it was pretty easy.

@peteyjay3761 2 года назад

@@ProjectDanH sweet, thanks brother!

@TheBeardedJeeper 3 года назад

Should have kept them yellow and called the jeep Colonel mustard

@ProjectDanH 3 года назад

OMG that's amazing! 🤣🤣

@15farcry 3 года назад

I love seeing how crappy the part you are replacing looks. It only confirms the reason why you're doing it. LOL

@ProjectDanH 3 года назад

Yea the original control arms were totally destroyed! I was moving jack stands all over the place in this Project. I had them under the axle in a very wide stance at first but had to bring them closer to center to get the control arm bolts out.

@15farcry 3 года назад

@@ProjectDanH Also Dan, when dealing with bushings, you want the weight of the vehicle on the axles before tightening the control arm bolts. When you tighten the control arm bolts with the vehicle jacked, then when you lower the vehicle on its own weight, the bushings twist. When doing it the other way, the bushings are not under stress.

@ProjectDanH 3 года назад

Ahhh dang it! You're totally right! I blew it 🤦‍♂️

@nathanraycraft9710 10 месяцев назад

I just paid $100 for the same control arms how can I get em for free like you did? Lol butt seriously

@EvanHartenburg 3 года назад

You could have painted them before putting them in

@ProjectDanH 3 года назад

Of course I thought of that! But I'd have to do it right. Take it apart, send it down, tape it off and do two or three coats... That would have taken all day and it was getting late!

@misstransgender 3 года назад

lot of rust on the under frame

@ProjectDanH 3 года назад

The Rockers are shot

@misstransgender 3 года назад

@@ProjectDanH YOU GONE PUT IN THE AFTER MARKET REPLACE MENT