Jeep Wrangler 392 gets Rigid DSS Driving lights: Install 

Guilty as charged. I resemble that remark. 😊

I like the lights and I don’t notice any excessive or distracting hood glare. They are very bright and do well on dark trails, I don’t notice the hood blocking any light, mounted low like i have them. I still like the mounts I got, although they are starting to fade in the sun, as others have noted. When I mounted mine, the 392 hood was fairly new and there weren’t a lot of options. Now that it’s been around for a while, I’m sure that manufactures have come up with more options. I like the low profile. Good luck with your install, let me know how it goes. Thanks for watching.

I’m sure you got it figured out by now with my late response… the square part of the bolt slipped into the slot for me and I was able to tighten it down. But you may need to down size the bolt if that won’t work. Worst case may be to use a flat bolt with locking washer and red lock tight. Hope you got it to work. Let me know what ended up working. I wonder if Rigid changed something up. Good luck.

Hope it helped. Thanks for watching.

Not at all if you are using the factory installed AUX switches. All you have to do is install the power wire from the lights to the AUX switch you want to use, and the ground wire on to a ground point, and you are good to go. Jeep made it easy.

@@mybucketlist5940 How about my jeep Willys 2020 don’t have the AUX switch

Glad you found it and it solved a problem! Thanks for watching.

No I’d didn’t have to. The lights come with the wiring harness already set up like that so you dont have to do any splicing. You only have to make the connection to the existing Jeep wires. Good luck and thanks for watching.

Worked like a champ! Thanks again

Glad to hear!!

They are the spot lights and throw off great light and are plenty wide.