JEEP Wrangler LED Mirror Installation Tutorial

Подписаться 90 тыс.

Просмотров 239 тыс.

50% 1

In this video, I will be installation a pair of LED Mirrors on my 2014 Jeep Wrangler Unlimited. Feel free to watch this step by step tutorial and follow along.
Jeep Wrangler LED Mirrors - www.gtajeeps.ca/product-p/41.htm
www.adventuredexonline.com
My Jeep Build List - amzn.to/2AwJHCc
Camera Used: amzn.to/1Uos4vg
www.adventuredexonline.com
Thanks for watching!!
Follow me on Social Media
Facebook - adventuredex
Twitter - adventuredex
Instagram - adventuredex
Special Thanks to JeepAccessoriesGTA

Авто/Мото

Опубликовано:

4 янв 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 349

@dominicsedillo7552 6 лет назад

Dude....this video saved me hours of installation..step by step was on POINT.... final installation looks killer! Thanks 👊🏼

@demarcuscrump4904 2 года назад

What tools and sizes were needed?

@rpaz9684 7 лет назад

Cool video, clear no bad audio. Right to the point. Showing step-by-step instructions. No music blasting on how to vid making it hard to understand. Started to follow, already clicked on links for add on to my jeep. Keep up the good work.

@adventuredex 7 лет назад

Thank you! I love the feedback and will continue to make top notch Jeep installation videos!

@socomt5 7 лет назад

Just finished watching the video, honestly, I was not expecting much from the brightness of the side led's, I have to admit I am quite impressed. I will be saving this video for my side light install, Thanks AdventureDex.

@adventuredex 7 лет назад

+Denis Picciuolo thanks for the positive feedback Denis! They are very bright and great for being able to see to the left and right where the headlights can't reach!

@szudy76 11 месяцев назад

I subscribed because I own a Jeep 2014 wrangler JKU as well and your tutorials are soooo helpful. Keeps my husband from having to help me all the time :)

@ahreeves 6 лет назад

On the mirror separating aspect: put the connecting bolt back into the bottom about four clockwise turns leaving about 3/8” of the bolt away from tight. Then hold mirror extention arm, and use hammer to drive bolt down towards mirror housing, three good blows will separate the extention from the mirror housing. Time: 7 seconds

@adventuredex 6 лет назад

Thanks for sharing!!

@Eseugs1 7 лет назад

I just bought these mirror lights right before Christmas and had no way of how to make these lights be a plug and play type for in the summer time when I want to take the doors off. AdventureDex glad you posted this video! This will help me a lot when I install mine! Great videos! Have watched most of your videos and I've learned something from all them.

@adventuredex 7 лет назад

Thanks a lot Eddie! I am so glad that this video helped! I enjoyed making it and am glad you enjoyed watching! Feel free to watch this video when doing your install. It is not extremely difficult if you take it step by step! Thanks for the support! #jeepwave

@libniguerrero7363 5 лет назад

Im not sure if anyone else has posted this. But it's easier to separate the base of the side mirror from the housing by leaving the mirror screwed in the housing so you have more support when you're hitting it

@christopherdemmer4365 4 года назад

Libni Guerrero this saved my day. After 30 minutes of hammering with a screwdriver, I went to HD and purchased a 4” Hex Cap Screw, class 8.8, m8-1.25x100 then screwed it most of the way into the threads and hit it with a regular hammer several times. Using the longer screw was the only way I was able to separate the parts and it only took a min. Than you

@Jefftaylor2114 7 лет назад

I like these better than the light bars. it's more discreet and gets the job done, great video.

@adventuredex 7 лет назад

I agree Jeff! Thanks for watching!

@daltonaldrich4588 5 лет назад

putting the string on the end of the old mirror will save you a great deal of work THANK YOU VERY MUCH FOR THAT TIP!!!!!!!!!!!!!

@RockyXTV 7 лет назад

Awesome video! I've had my eye on a set of these for Project Dirty Willy.

@adventuredex 7 лет назад

+Rocky X TV they are sweet! Glad you enjoyed! #jeepwave

@TGRoman86 7 лет назад

Awesome video brother, thank you for the step by step tutorial.

@adventuredex 7 лет назад

+Titan Ro thanks for the positive feedback! #jeepwave

@scottmacarthur6223 5 лет назад

Great Video. I have a more basic 2013 wrangler, roll up windows, manual mirrors, this shows me I can add these even though I have the manual mirrors. Thanks again.

@original_silverdee 3 года назад

Well this video helped me decide to buy the mirrors, great video Bro, thanx!

@amirtv2479 7 лет назад

Great videos man. I love them. They really helped my jeep look great

@adventuredex 7 лет назад

Thanks Amir!

@amirtv2479 7 лет назад

AdventureDex up load more

@LouisCaputo 7 лет назад

Nice video. I think I'm a step closer to buying these now!

@adventuredex 7 лет назад

Thanks Louis! These are awesome! Totally recommend

@TheCscottfry 7 лет назад

These look great on your jeep!

@adventuredex 7 лет назад

Thanks alot Colin! #jeepwave

@mets0403 7 лет назад

So there is no way I have the patience or talent to do that. But still wanted to thank you for the video and they are freaking awesome looking!

@adventuredex 7 лет назад

+mets0403 Thanks for the support! If I can do it then I am sure you can! #jeepwave

@christophermartinez5314 3 года назад

Excellent installation

@matpinato8892 6 лет назад

6 and half hours later! lmao. Just got a pair of these same LED mirrors will install tomorrow thanks for the tutorial buddy

@adventuredex 6 лет назад

LOL Thanks for watching Matt! Goodluck with your install!

@baljeetsangha9884 5 лет назад

Very helpful!! My next mod!

@adventuredex 5 лет назад

Thanks!!

@Nerdblurt 4 года назад

These are on my list as I like the smoke turn signals and the lights

@Jeep79 7 лет назад

That's a great video dex thx i like those mirrors nice

@adventuredex 7 лет назад

Thanks Yaniel!

@Ro3Go 6 лет назад

Badass Dex! I've got a mirror I gotta change out. Some idiot hit my jeep mirror on the left and gotta replace. Thanks for the instructions.

@adventuredex 5 лет назад

Anytime Luis!! 🤙🏼

@AliBaba-nz5bz 7 лет назад

I love your vids keep it up

@adventuredex 7 лет назад

Thanks alot for the support!

@rclinchaib1853 2 года назад

Nice! love it

@chantalxox 7 лет назад

I love these!! Already looking into getting these. They're gorge!

@chantalxox 7 лет назад

Question!! What lights do I need to purchase to match the LED mirrors?

@adventuredex 7 лет назад

Thanks for the comment! Yea, they are always!

@adventuredex 7 лет назад

What do you mean match? Where are you planning on mounting the lights?

@TheJohnhazelair 7 лет назад

Gorge? No offense, but you typed out every other word- why not finish typing out gorgeous? Ugh society today. "Let's make fetch a word".

@chantalxox 6 лет назад

TheJohnhazelair Um... Why do you give a shit about how I talk? I'm a chick, not a dick so if I want to say gorge, I can. And yes, I made fetch happen. 😉

@waltervilellajr.7773 12 дней назад

Muito bom este vídeo , boa técnica , obrigado 🙏🏼 e que sigue fazendo más vídeos 🎉

@Buck_Rail 7 лет назад

Great video!

@adventuredex 7 лет назад

Thanks Buck! #jeepwave

@hersonvalle 3 года назад

I can’t wait to do it to my Jeep

@awesomeamador1975 5 лет назад

Great video! I was nervous to try this but I feel better after watching this video. Side question, what interior rgb lights did you get? Thanks again!

@SerpentineGX01 Год назад

Thanks a lot bro!

@michaelwright6751 7 лет назад

I ended up purchasing the Xprite Clear Lens Red LED Brake Tail Lights Assembly with Rear Turn Signal Reverse Lights For Jeep Wrangler JK which looked and worked just like the Anzio lights for half the price. Great test though, gave me insite and direction.

@adventuredex 7 лет назад

Thanks for the comment Michael! I am glad you found the video helpful! #jeepwave

@KingsDisasterGarage 7 лет назад

Great video they look great

@adventuredex 7 лет назад

Thanks alot!

@Nunyabizn3ss 7 лет назад

Thanks, I'll get them in short order. Will mention you in the notes.

@chrissullivan1756 6 лет назад

Those mirrors are so sick ! I will buy some for my jeep

@adventuredex 6 лет назад

Thanks!!

@marypoppins9596 6 лет назад

I’ll never do this but I’ll still watch

@adventuredex 6 лет назад

Haha Thanks for watching!

@adventuredex 7 лет назад

Thanks for watching! I hope you enjoyed! #jeepwave

@socomt5 7 лет назад

Off subject, where did you get your color ac covers? the Red really sticks out, and I think that would look good in my gray jk! Great vid btw!!! and happy new year.

@adventuredex 7 лет назад

+Denis Picciuolo Thanks a lot Denis! I have a DIY video on how to paint the vent covers! Check out my other videos! Thanks for watching! Happy new year

@kennyconley8383 7 лет назад

AdventureDex when hooking up the power of the lights that color wires did u hook it up too in your jeep at the bottom? that's where I got lost at. and trying to put it on a switch. confused

@danielgonzales9413 6 лет назад

AdventureDex i have a problem i think i installed in a bad way my mirrors connection cables, is there a way you can show me how to do it without the string u tie to the cables? I took it out without a tie string on the cables of the power mirrors

@adventuredex 6 лет назад

+Daniel Gonzales no worries just use a snake to feed the wires through. You can get one at any hardware store!

@redneckindustries 7 лет назад

Too much work!! I'm just going to duct-tape flash-lights to my mirrors :)

@adventuredex 7 лет назад

LOL that could work too! Thanks for watching!

@GoBrentSpence 4 года назад

LOL... Good Luck with that... :)

@forgingluck Год назад

Thanks for that, this'll help a lot - getting some in in a few days that I'll have to wire up myself, looks like a really cool product. Any tips for getting it through the door panel hole if one doesn't have the power mirror harness to help fish it through?

@armandomrgl85 5 лет назад

Great video, I was looking at your build list because I like your grill with the light bar installed to check out the grill & didn't see it listed, I checked out the links you provided is that custom?

@michaelmixon2479 7 лет назад

Good video! I might have used a door panel tool. They are really cheap and lessen the stress on the clips.

@demarcuscrump4904 2 года назад

Where to get tool?

@michaelmixon2479 2 года назад

@@demarcuscrump4904 Local auto parts store will sell them in a set.

@fernandochavolla6189 5 лет назад

Can you explain more how to install this side mirrors to me please im lost and dont know what to do i love watching you videos just in this installation im having a hard time hope to here from you soon and thank you for your RU-vid channel it helps alot

@michaelscott2063 2 года назад

I love those side mirror lights is it possible you could send me info on how to get them wow man I did not think that they would throw that much light from one side to the next that’s awesome

@chantalxox 3 года назад

Question: I have these and love them but on one, the light went out so only one of them work. Can they be replaced or do I need to change them all the way out?

@jayeparker9281 5 лет назад

my passenger mirror came apart with no problem, I am about to give up on getting the driver mirror apart.....whew....good video very helpful.

@FROSTY420692002 3 года назад

Does this work with Jeep gladiator 2020 since everything is usually the same on wrangler

@JeffreyDavidson-ll4xy Год назад

I know this is old, but hopefully you are still answering questions about it. I'm doing a similar job and I'm wondering what is the easiest way to get the turn signal light wires into the inside of the Jeep? The wiring of these to make the turn signals and spot lights work has me a bit stumped. Thank You!

@yoboijd4175 3 года назад

at the start of the video that was the biggest skit ive ever seen lmao

@oscarlebron4678 4 года назад

Hey, Dax, I was enjoying this video, but I have a couple of issues with it. First, during the wiring phase you connected the ground wire to the frame and you already had you quick connects on the other two wires, but where did you connect those too? You went from the negative ground to soldering the other three wires and you lost me there. Also, while serpentining the wires to the other side, how would I connect those?

@dermont5 2 года назад

Man I want these mirrors

@USfoolsgold 6 лет назад

After watching your very helpful video I bought a set of these. Unfortunately I couldn't get over the large gaps between the glass and new housing so I sent em back. Great video though.

@adventuredex 6 лет назад

Thanks for sharing! What large gaps?

@USfoolsgold 6 лет назад

On the set I ordered from Amazon there was a large gap between the outward side of the glass mirror and the new led housing. For me, the mirror looked way too small in that housing. Got mine from Lantsun on Amazon.

@adventuredex 6 лет назад

Yah that is usually how they are!

@adventurefamily2706 7 лет назад

good job bud

@adventuredex 7 лет назад

Thanks bro!

@colbyroy7610 7 лет назад

I wish my jeep was that nice 👍

@adventuredex 7 лет назад

Thanks Roy! It can be!

@buildersmark 5 лет назад

How about a led kit that you cut your mirror housing & install. Note also it would be good to purchase some OEM connectors to create harness from led wiring through door panel to give more professional installation.

@jakestcloud4947 5 лет назад

I cannot seem to find the indicator light wire on the factory harness. I’ve searched using a tester with no luck. Perhaps the amperage isn’t high enough to power the mirror indicator light? What color is the stock oem indicator light power wire on either side of the vehicle? I’ve tested the indicator light right to the battery and it illuminates just fine

@rossmitchell9599 Год назад

Sir, I have a 2019 jeep wrangler,and would love those Mirrors, will they work on my Jeep?

@MrPoseidonSays 5 лет назад

You make really nice explanatory videos! I just wished you owned a JL 😁

@Hallywood03 6 лет назад

Thank you

@adventuredex 6 лет назад

Anytime! Thanks for watching!

@JeepAccessoriesGTA 7 лет назад

Awesome!

@adventuredex 7 лет назад

Thanks for the support! Glad you enjoyed! #jeepwave

@fenixreborn1 6 лет назад

GTA JEEPS & 4X4 ACCESSORIES

@adventuredex 6 лет назад

🤙🏼

@vanillascoop11 7 лет назад

wow dude... that's a ton of work. great video tho

@adventuredex 7 лет назад

Thanks alot bro!

@tazin8r 3 года назад

Just wondering why you didn't use a three terminal connector where you used the three "Quick Connects" to extend the wiring for the LEDs? Would have made it much easier to disconnect when you take the doors off

@taadventures6312 6 лет назад

Great video man. Just installed a pair of led mirrors. Not those but basically same thing. Only problem I’m having is the turn signals only work if the spot lights are on. Not sure what’s up.

@adventuredex 6 лет назад

That is strange, you might of wired the whole thing up to a switch instead of having them independent! Thanks for watching!

@laylowmafia7072 Год назад

So when you have your parking lights on does this turn in the indicator on the mirrorsV

@robertofals4984 4 года назад

I have a 6 botton switch that goes in the inside of my roof, where you say that you have two possitive, one goes to the signal light. Does the other one go on the switch box or where does it go??

@RubiconUnlimited 7 лет назад

awesome glad to see a local Toronto supplier! how do you think these will hold up? how's the build quality? thanks for the awesome install

@adventuredex 7 лет назад

Thanks for the comment! They seem to be good quality! The housing is exactly the same as the Mopar so as long as you don't hit them on anything they should last! Thanks for watching!

@ahpamericanhandymaninparis4353 3 года назад

Hi I did install the two mirror with the LED light and everything work perfect, But the problem that I have right now it’s with the one wiring left for the Brinker, Also in my turn signal adapter I have just two wiring black and white what should I do to make it work ? Thanks

@galaxykitten8630 7 лет назад

Great video Dex! loving the jeep!

@adventuredex 7 лет назад

Thanks alot Ben! I appreciate the support! #jeepwave

@billyrtaylor8041 6 лет назад

Ben .Lux

@Teutobog 7 лет назад

Nice pro tip with the string!

@adventuredex 7 лет назад

Haha glad you like that! #protip

@danielgonzales9413 6 лет назад

Is there any tip if i did it without the string? I cant get my cables through

@adventuredex 6 лет назад

+Daniel Gonzales use a snake!

@airbornepalma 5 лет назад

How do you wire the blinkers

@carlosm809 7 лет назад

I'd like to get those for my 1997 80's series. Looks awesome! Can it be done?

@adventuredex 7 лет назад

Thanks for the comment! It could be done but it would have to be custom fabricated! You could possibly get a very slim flush mount LED and mount them behind the mirror. Hope that helps! thanks for watching!

@robbieginn4635 5 лет назад

will they work if you don't have electric mirror

@wolfstalker81 2 года назад

I was done with work on JL

@MManiac911 7 лет назад

I just saw these this month and was wondering if I could find a video of them, they look awesome. Did you wire both LEDs to the same toggle switch? Also, you had to cut the white/red wire for the indicators and splice the wire into it correct?

@adventuredex 7 лет назад

Thanks for the comment bro! I already had my pod switch prewired so I ran the two positives from the LED mirrors connected them together and connected it to the switch. For the indicators, if you have a true splice clip you don't have to cut the wire, you can clip directly onto it and it makes the connection very easy! Hope that helps! Thanks for watching!

@johnpsmith8356 4 года назад

How can you wire these to your DRLs and turn signals? I used a splitter running the turn signal wire to both but either one works or the other but not both. Any suggestions? Thanks!

@adventuredex 4 года назад

I don’t believe they can work simultaneously

@mcginn997 6 лет назад

What if I only want the indicator? Can I leave the other two wires tied off?

@williamsarosy2252 7 лет назад

What type of rosin solder did you use to wire? And as far as the quick disconnects, what size were they (12-10 AWG, 16-14 AWG, 22-18 AWG)? Thanks! Can't wait to do this to mine! :) Keep up the vids!

@adventuredex 7 лет назад

Thanks for the comment William, Unfortunately I don't know the answer to either questions. The quick disconnects that I would recommend are these (amzn.to/2nJUNQu) Thanks for watching!

@georgerabel4617 6 лет назад

Good video. Are those LED side lights legal for highway/street use? And are they adjustable for more forward use?

@adventuredex 6 лет назад

All depends on your local laws! Thanks for watching

@sylvanischurch3464 6 лет назад

I have a 2012 JK Sport 2dr. It's a basic model, so no power doors, locks or mirrors. Is there an install/ wiring video for that?

@adventuredex 6 лет назад

Thanks for the comment! Its the same process just use a snake to fish the wires through the door. Hope that helps! Thanks for watching!

@casmo38alicea40 6 лет назад

I was watching your video onto how install your LED lights side mirrors my doors have power locks power windows but not my side mirrors what can I do

@adventuredex 6 лет назад

It makes no difference in the installation, follow the same steps! Thanks for watching!!

@demarcuscrump4904 2 года назад

What size bolt and tool is needed?

@billyshavers7414 5 лет назад

Do they sale one for the YJ Jeep?

@pssita 7 лет назад

Beating the shit out of it.. made my day!

@thecarjunkie3609 7 лет назад

WxGuy lol I was just gonna say the same. Not an easy installation I must say

@adventuredex 7 лет назад

+WxGuy LOL the right side was smooth as butter but the left of course it was a pain in the ass! Thanks for the support! #jeepwave

@adventuredex 7 лет назад

Am sure you could tackle this installation!

@TheJohnhazelair 7 лет назад

How'd you wore to driver side door then to the wiring pod? I connect wires to driver door wires, then I tap into those to run to pod/turn signal?

@adventuredex 7 лет назад

Yes, you only need to connect the two LED's. The turn signals get wired individually cuz they are controlled separately by each side. Hope that answers your questions.

@hughes1765 7 лет назад

Hey man! I have heated and power mirrors on my 2015 Sahara. Will these replacements also be heated and power mirrors?

@adventuredex 7 лет назад

Thanks for the comment! Yes, these will work with no problems!

@julienagostini7952 3 года назад

Hello, thanks a lot for your video, we followed it step by step to make it, but one of my side mirror sis missing one of the 3 little screws behind the mirror, I was wondering if you knew what kind of screw is it to buy one, thank you

@adventuredex 3 года назад

Glad you found it helpful! Now sure on the screw as it’s been a while since I did this install. Thanks for watching

@julienagostini7952 3 года назад

@@adventuredex That was a fast answer, yes that was very helpful, mostly the string trick, and no problem, I just didn't want to have to take one out again 🤷🏻‍♂️ thank you tho

@marco9978 7 лет назад

the top

@adventuredex 7 лет назад

Thanks for watching!

@nccoach32 5 лет назад

These are the sprites?

@caospop 7 лет назад

Where did you get the LED turn signals, and the color changing LED lights inside the jeep.

@adventuredex 7 лет назад

Thanks for the comment! I have videos on both items on my channel but most parts you can find on my online store! www.adventuredexonline.com! thanks for watching!

@elvispolanco7270 7 лет назад

hey bro. I've been trying to tint my soft top from a long time now and I couldn't. Any tip?

@adventuredex 7 лет назад

Hey Elvis, thanks for the comment but I am not sure what you mean by tint your soft top?

@jonathanstafford3383 Год назад

Just installed… everything seems good except the indicators are just on the dont flash when I turn or emergency the just stay running and I made sure I hooked it up to the corresponding yellow wire on light harness

@victorcuevas5179 Год назад

It's the red and white wire

@akamike102 6 лет назад

my jeep is a 2010 door panel is diffrent and my mirrors are not powered or heated any suggestions yo make it work

@adventuredex 6 лет назад

Its the same process just the bolts on the door are in slightly different places. Thanks for watching!

@YOUNGGGGQI 7 лет назад

Will the heat mirror work after this been installed?

@adventuredex 7 лет назад

Yes, everything get reconnected and works perfectly! Thanks for watching!

@Sniperssx 3 года назад

i have the same as yours but LED not lighting at all don't know what could be

@ay-ay-ron8895 Год назад

Still currently having trouble separating the mirror

@ronniegriffin3671 6 лет назад

(looking at the front) my right side indicator has two white wires one with green stripe and one with a brown.... my left had red and brown..

@adventuredex 6 лет назад

When you are unsure just use the process of elimination! Hope that helps!

@christophermichaelson9050 7 лет назад

Your wire stripper has an "insulated" and "non insulated" area for crimping connectors. You are using the "non insulated" area for crimping your insulated connectors. Just thought you should know.

@adventuredex 7 лет назад

Thanks for the comment Chris! I appreciate the insight! Sometimes in rushing you make mistakes!

@adammichener5530 6 лет назад

Where did you run the wires through the firewall?

@adventuredex 6 лет назад

Through the firewall under the drivers side dash! Its a rubber grommet that you will see! Thanks for watching!

@ArawnTheUndead 7 лет назад

Could you hook the side mirrors up to ur brights instead of the switch?

@adventuredex 7 лет назад

+Justin Manning Yes, they can be hooked up to any power source. Thanks for watching!

@gustavomedina912 4 года назад

thank you for your help , just to add put wd40 on the mirror to loseit up and use a long bolt to hit it down its easier.

@joseproag5657 3 года назад

Do you hit inside were the bolt goes ?

@gustavomedina912 3 года назад

@@joseproag5657 y take the bolt out put wd40 on the hole and put the bolt half way in and hit the bolt down so it push the mirror assembly , it was easy r for me .