Instagram: / arden10j Gaming Channel: / arden10j Twitch: / ardenj10 Twitter: / arden10j Donations are much appreciated but you're not obligated to give! Thanks in advance! Click to donate: streamelements.com/ardenj10/tip
I'm about to upgrade, again, this time to a double din touch screen Panasonic dmh-1500nex. You showed the things I wanted to see, what to cut for the extra room and that a large double din will fit. Along with a camera, I'll be good to go. Thanks for the video.
I have a question? I see a lot of people speak about needing to splice into the pink wire that provides power to the amp that powers the tweeters, other wise they will not get any sound. I didn't see you install a crossover module, or need to splice any wires. Did the wiring harness you installed power the amp?
How did you attach the center black trim to the dash? Don't remember seeing you do that. Pretty much mine is broke because I tried to get creative and I mounted an a cb radio where the radio goes and mount a media player radio where the storage area is and used a single din radio kit to mount the cb and a single din kit down at the bottom for the radio but the radio kit I riveted to the dash trim and over time it cracked and is broke. Figured the old one is brittle from age. Going to try to get this kit and 3D print a double din mount that uses the factory screws but make it like the single din mount if that makes sense. I used one of the new cobra radios and it looks really good.
Its been a while since I've done one of these but I'm pretty sure if you drill out the "plastic welds" with the right size bit then it will just snap in
Can you please provide the link for the radio and dash kit? Having a tremendous amount of double buying a radio and dash kit that are compatible. All advertise they are, none have been so far.
Great work man...I have a jesen vm9314 I have a issue I have a wire thats coming out the radio says bluetooth but I don't know were to wire it to?.I can't pair up .
lol glad I do my own work. You always take it to shops and they break something and don’t replace it and you don’t know about it till you have to replace something or when something moves that shouldn’t.
How do u fix gaps I did my 04 dodge ram 1500 I installed dvd/cd player in mine double din it's a pioneer I have a small gap on the right side of the radio
You may not have the power and ignition wires wired correctly. There should be a red wire and yellow wire for your powers. One is for constant power and one is for ignition. Make sure those are correct. If they are, then you may have the wrong harness
Go on Crutchfield and put in your truck info. Then find the radio you have or one of similar size (Single DIN or Double DIN). Click "See the installation gear you need" and it'll bring up any harness or dash kits you'll need
You have to physically push the power button when you first boot it up or if you disconnect the battery. But once you do that it will turn on with the key
I went with a Sony 5600 for head unit and Infinity reference speakers in all positions. The Sony is a single DIN body with a double DIN face. So no mid section dash trimming required. Slid right in.