Jet Powered Tesla

Подписаться 1,4 млн

Просмотров 6 млн

50% 1

I Mount 3 jet engines to my Tesla Model S to make the world's first Tesla with Jet Thrusters, I call it the Jet-Powered Tesla as I do in fact drive it under only jet power.
This build was extremely in-depth, I listened to what everyone was asking for in the past videos and I built almost every single part from the ground up, I counted over 200 parts in total.
The next project I'm going to be doing with this car is going to be even more extreme.
Not only did I make over 200 parts but I also had 88 folders full of video footage because the build took about 42 days total and my schedule was heavily affected by raw material shortages.
All the machines and equipment I use are on my Website: www.ShopWarpedPerception.com
But I do have a lot of other footage and cool videos that I took while filming this episode, I'm going to be posting them on my second Channel called "Unthinkable" Here's a link to that channel / @warpedlab and I will have the first jet-powered Tesla-related videos uploaded shortly after this one posts.
Thanks for watching and thanks for everybody's support!!
I'm gearing up to make more intense episodes so look out for those.
Chapters:
00:00 Intro
00:22 Building Jet Control Panels
03:38 Building Rear Controls
04:29 Attaching Jet Engines
05:59 Installing Fuel Tank
06:20 Build Fuel Gauge
06:29 Jet Engines All Done
08:03 Test Run
09:18 Blasting Alley Full Thrust
10:30 Driving on Freeway Jet Power
13:50 filling Up With Fuel
14:24 0-60 Runs at Strip
15:42 0-60 Run 1 No Jet Power
16:15 Starting Jet Engines
17:19 0-60 Run 1 with Jet Power
18:09 0-60 Run 2 with Jet Power
19:35 Why I Placed Engines
20:25 Outro and More Info
↓↓Social media Links↓↓
🐦 ► Twitter: / warpperception
👍 ► Facebook: / warpperception
◙ ► Instagram: / warped.perception
☢ ► IMDB: www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka

Авто/Мото

Опубликовано:

22 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 8 тыс.

@RichRebuilds 2 года назад

I connect with this on a spiritual level. Awesome Job Matt! See you shortly 👀

@WarpedPerception 2 года назад

I know you love electric and I also know you love diesel fuel hahahaha! For sure we have to get in the kitchen together soon and cook something up.

@Questchaun 2 года назад

Why? He didn't click bait anyone with a fog machine.

@TexasSean 2 года назад

The elusive cliff hanger from Rich rebuilds, I want to see the video collaboration!

@admiralthex 2 года назад

@@Questchaun can't tell if the fog machine is his "assistant" or if there was a video with an actual fog machine. 😂

@Questchaun 2 года назад

@@admiralthex when rich first started his RU-vid account He used a fog machine to pretend his flooded Tesla caught fire. To me a slimy way to get views.

@kylevanderaa1229 Год назад

I'll never forget hanging out in my condo on Chicago ave and hearing what sounded like an airplane taking off on the street. I looked out the window and saw a Tesla with three jet engines strapped to the back. I finally found this video, you are incredible!

@WarpedPerception Год назад

Thanks ! What hood you live in ?

@kylevanderaa1229 Год назад

@@WarpedPerception West Town near Chicago and Wolcott!

@WarpedPerception Год назад

@@kylevanderaa1229 lol! That's more of the hood than where I filmed this for sure! Thanks for the enthusiasm!

@danspence2848 Год назад

I was wondering what it's like to be this guys neighbor lol

@santa_claus-north_pole Год назад

Too bad it is illegal. Fun, (as most illegal things are), but very illegal.

@josephquinn6060 2 года назад

Tesla: We are fully electric and pollution free Matt: My Tesla burns 100 lbs of fuel in minutes!

@Eli-kr5bm Год назад

That engines running so efficiently, they are burning away the pollution, better than the coal burned to generate electricity

@CarlosAM1 Год назад

@@Eli-kr5bm in reality most plants in the us are transitioning to using natural gas, and multiple states already use a good amount of renewable or in some cases nuclear power, so an electric car can indeed be way better co2 wise than a gas car. Though def not a solution to traffic. Edit: just to clarify I fully support nuclear power, in case y'all missed that

@Jkur2009 Год назад

@@CarlosAM1 nuclear is the best, most reliable, cleanest energy source we have.

@CarlosAM1 Год назад

@@Jkur2009 I know, hence I mentioned it.

@KangJangkrik Год назад

@@Jkur2009 nuclear has great power, but also great responsibility

@RichardSmith-kb3uk Год назад

I just want to take a moment to show some appreciation, no, admiration for all the skills needed to so this. A person could make a good life off of having just one of 2 of the skills or areas of expertise to make all this happen. You've got them all wrapped up in one guy. I feel like I need to step up my game as a man. - Electronics, embedded systems - Programming - CAD (Computer Aided Design) - CAM (Computer Aided Machining) - Welding, Aluminum welding? You know how seriously hard that is? I've never been able to master it. - Knowledge of fluid dynamics (Air Flow) - Knowledge of Thermodynamics, Jet engine life cycle. - Creativity, look at all the problems that had to be overcome to make this not be a complete disaster! I'm just speechless. What an inspiration.

@Man_TM Год назад

"Yes officer, it's stock"

@user-ik9rq7nq3v Год назад

Апхах 12.5.1😂

@DoubleYouPee1 2 года назад

That aircraft style console is probably the coolest part. Especially the 747 style throttle gauges. 🤯

@newtonfirefly3584 2 года назад

Your comment clearly states how much You enjoy the look of the jet engine throttle levers. However, it is clear You have never actually been inside any jet engine aircraft cockpit or a cockpit simulator either. Firstly, the B-747, has four jet engines, as the B-707, not three. A B-727. DC-9, MD-88, DC-10, MD-11, L-1011 commercial aircraft and maybe some other smaller [though unlikely] have three engines, thus three jet engine throttle levers. The B-757, B-767 have two engines. All such jet engine aircraft have similar sliding throttle levers. The gauges are certainly not similar to the B-747-400, since the avionics and instrumentation are completely electronic with LCD monitors and as was required by the FAA, a few older physical instruments for backup [horizon, etc.]. there are no such old 'LED' or 'LCD' character displays. My engineering work led me to be within a team contracted to McDonnell-Douglas to support their testing of the MD-11 avionics and cockpit instrumentation from Sperry including the fixed based, full cockpit simulator with visuals [August 1988-December 1989]. Sperry also made the same avionics and cockpit, duplicated for the B-747-400 which was designed, built and produced during the same time period. Thus, also had the opportunity to use the simulator to 'fly the aircraft', from the pilot seat to test operation and experience it also. Also the military aircraft, including the propeller type use the sliding throttle controls too, for many decades, back to 80-90 years ago too. Actual pilots of various aircraft can give You their level of detailed information. All the Best. Sincerely

@Republic3D 2 года назад

@@newtonfirefly3584 What's the point of your comment? He thought the gauges were cool. You started with a derogatory remark and then went on a tirade about FAA and LCD monitors and your engineering work from 30 years ago.

@CactiKing200 2 года назад

@@newtonfirefly3584 get a life please, you wrote a essay off of a comment complimenting the way the throttle looks.

@ryderwe4194 2 года назад

@@CactiKing200 for reall wtf

@newtonfirefly3584 2 года назад

@@ryderwe4194 @ Nick J; Both of You clearly violate Your assessment, and seem to enjoy directing others to what You need; a fine example of common self-reflection and projection, usually without self-realization! Why are You both interjecting into my comments to another ?! Were they directed toward You? Do they pertain to You also? Do You think or feel some 'need' to interject, interfere and 'justify' the other user and his comments ?!! If, so , why ??!! It seems clear, that You could use Your own advice more than me. Sincerely

@stevush 2 года назад

holy s**t, the level of production is CRAZY. I was literally hypnotized when watching the construction part... 0_0

@WarpedPerception 2 года назад

Thank you! 🤩. That means a lot, to add it is hard enough to separate yourself from the project so you can see what others are going to see when they watch your video when you make it is a completely different challenge, sometimes you get it right sometimes you miss the mark..

@evansste Год назад

This is a great way to discourage tailgating. I'm all for it!

@charaznable8072 Месяц назад

That one SUV saw the flames and slowed down real quick lol.

@bychyke9581 Год назад

This guy is so damn admirable. A true engineer. Wow.

@JoelCreates 2 года назад

Having gone 53 mph on a radio flyer wagon with one of these strapped to the bottom, I know how insane it is to hear them fire up! Loved the detail in your control system, really well thought out and executed.

@WarpedPerception 2 года назад

Hahaha... I'll have to look that video up, 53 mph on a wagon man... Hall of a rush I'm sure. Thanks

@WarpedPerception 2 года назад

I just checked out that video, dude you guys should have totally called me up.. and you bought a king tech Engine oh man.. 🤦‍♂️🤦‍♂️.

@JoelCreates 2 года назад

@@WarpedPerception I'm sure we would've benefited from your expertise! If I were to buy my own engine, what would you recommend?

@WarpedPerception 2 года назад

I can DM you, the ones I have 2 suppliers, problem is their a pain in the butt to get.. but I know King tech well and well that's all I'll say about that.

@JoelCreates 2 года назад

@@WarpedPerception that would be most appreciated, you can use the email in my "about" section, or I can send you an email if that's easier

@mikeypal6384 Год назад

This video showed a complete disregard for highway safety. I love it

@fullauto2006 Год назад

Yea i was like what happens if it breaks or flies off or someone gets too close. Seems reckless tbh

@painexotic3757 Год назад

@@fullauto2006 that's what makes life fun.

@Mizra-dq3lj Год назад

@@fullauto2006 the virgin worrying about the safety of others vs the Chad " I love it "

@fullauto2006 Год назад

@@Mizra-dq3lj dont feed the trolls

@eyefishinggunkchannel1011 Год назад

that's what makes life fun no fun is goingin the desert or somet or out of the way doing shit can I imagine off i foundout he crashed and killed a 2 year old kid get u would Celeste that comment cos i dont se putting others at risk is good ya say yes cos it's dangerous and ppl love it but ppldont get excited about putting others at risk...did you no he safer on a plane than on the roads cos there's just complete idiots about..

@elhoussainefagrouche3267 Год назад

my man this is some serious mechatronics engineering holy cow, industrial IT, Arduino in a jet engine, 3D design and mechanical manufacturing, you got some real skills , Absolutely EPIC ! keep up the good work

@robindas1207 Год назад

yea exactly

@chrisyang05 Год назад

11:57 The driver of the white VW: "I want to get into this guy's slipstream" 😂

@MadofaA 2 года назад

I am very impressed by how you took one of the most silent cars in the world and made it one of the loudest! Genious! :-)

@ChristmasEve777 2 года назад

ONE of the loudest?? haha

@SothHONGEngineering 2 года назад

Right.

@bbs5400 Год назад

This guy can do everything, weld, code, wiring, CAD, I'm probably missing some

@deltas4764 Год назад

Man's a talent bank

@hebleh5771 Год назад

Im new here but he sounds like hes one of those rich youtuber/influencers but on the geeky side of youtube and without the snarkiness and douchebagginess

@furkanbademli8402 Год назад

and also fluid analysis knowledge

@schmoborama Год назад

Design. he knows how to fucking design jet engines - and their interface - my brother designs and builds some crazy shit but not like this guy

@YourDadsBoyfriend Год назад

common sense...he has none

@mrsimo7144 Год назад

Amazing skills both mechanical and electrical. Such decent work. Thanks from the UK ❤️

@Michael.Chapman Год назад

Maybe a warped perception but the execution is supreme... a joy to watch!

@ThinkCleverAndSmart 2 года назад

The fact that you made it all look so clean, even in the interior, is a statement to the quality work you do!

@ProjectFarm 2 года назад

Absolutely EPIC!! Looking forward to more videos on the Tesla with jet thrusters!

@Deutz-fahr-fan 2 года назад

It’s my most fav RU-vid video now

@WarpedPerception 2 года назад

Thank you !! Yes I have a few more on the way .

@jdmkarello 2 года назад

Always makes me smile when I see PF in WP comments and vice versa, love both of your videos. Keep it up!

@JJ-si4qh 2 года назад

An endorsement from Project Farm is quite the honour!

@jstdrv 2 года назад

You could make a jet powered lawn mower!

@VZYBOI Год назад

It is mesmerizing watching someone make literally anything they can think of using any material and tools!

@heinzotto1194 Год назад

Love the build quality! So satisfying. Looks almost like the two outside engines starve the middle one of oxygen. You could try reducing the fuel delivery to that one to see if it helps with the flame-out issue.

@mikaeljonsson2078 Год назад

Being a mechanical engineer for two decades now (and tinkerer to some extent), I can appreciate how much effort that went into making this video. Just awesome!!

@raven4k998 Год назад

so that tesla is no long zero emissions haha

@oscarnoriega4122 Год назад

just to remind you.... this guy knows design, welding, video creation and editing, circuit boarding ,3D printing and computer programming and has all the materials available. This just shows you that you can become whatever you want in life ! Well done !

@gargoyled_drake Год назад

no, it shows us that HE could become all of those things, not everyone can win the battle royal. but definitely stick to what you enjoy and find interesting, nothing will be more fulfilling.

@Cockalicious Год назад

Not everyone has the knowledge and the budget this guy has

@turtles38x19 Год назад

maybe he has a team of people helping him and we are being fooled

@samgerland6087 Год назад

Its really amazing, so inspiring.

@varadvithalkj1716 Год назад

black ops 2 🤣🤣🤣

@willward952 2 месяца назад

What a massively talented, skilled and ingenious bloke.

@Pounamu104 Год назад

Ok but the music drop while building the control panels is actually really good. 1:14

@joelsantora7434 2 года назад

Sometimes I think I have too many tools but then I see someone like this looney tune and a solitary tear rolls down my cheek. This was a beautiful thing to behold. Shot very creatively too.

@WarpedPerception 2 года назад

Haha... Thanks

@westvalley411 Год назад

To, all I have is a 3 in 1 screwdriver...haha

@1YouTube_you Год назад

@@WarpedPerception I would love to pay you for your plans ? How do I get those ?

@spaceflight3191 7 месяцев назад

Buying the most eco friendly car… just to strap some jet engines to it. I love it!

@billyhead1625 Год назад

The fact that you did all of this is what is amazing!

@RadioactvPanda 2 года назад

That build montage was "Chefs Kiss." You used so many techniques I've never even thought of. Like 3D printing directly on a piece and clear coating it in? That's genius. I cant wait to see what other build montages you come up with. Thanks!

@RadioactvPanda 2 года назад

Oh and your music and sound effects are perfect

@cameronsharon9617 2 года назад

Can we just admire how the jet engines at full speed sound like they are sharting the entire time. It’s so beautiful I might cry.

@fourdaydownload6099 2 года назад

Always wanted to know what is sharting

@cameronsharon9617 2 года назад

@@fourdaydownload6099 It’s when u fart and poop comes out.

@idlm-gn9eb 2 года назад

I remember you succeeded, you remember that you must sell the accessories to everyone, I will order with you first.

@ThatNofbody 2 года назад

@@fourdaydownload6099 now u know

@isaacsrandomvideos667 2 года назад

Lol

@ksrucin 10 месяцев назад

Love that Closed Captioning goes from [Music] to [Applause] when engines are spinning up at 08:33

@alihamzaprojects9569 Год назад

The best part for me was in the second attempt, when the jets were at full thrust, you see the jet mounts under tension, and as you began accelerating, the mounts sprang back. The low light gave the extra cool effect looking at the jet exhaust. The wheels were spinning cause the weight of the car was being lifted off from the pavement by the jets; you may angle the jets a degree or so down to keep traction on the wheels. Looking forward to the next run.

@alanleclair1 2 года назад

You have fulfilled every kid's dream: a jet powered rocket car! Well done Matt!! 🎉👏🔥

@jamescrawley7993 2 года назад

Matt must have talked to Robert Lazar, and then worked on this one! (Look into Bob Lazar), he would love this car!

@anarex0929 2 года назад

Kids think of rocket powered cars Chad's think of rocket powered sport bikes. 🤘

@wallylim516 2 года назад

You took the works the out of my mouth :)

@macjalac5845 Год назад

That's if it worked because does jet engines are doing nothing to push the car he is just using the normal motor...

@epicbengal7239 Год назад

With money Im sure every kid in america would have the chance to do it, not in 2022 anymore every kid is poor and lives with their parents

@llorttaf 2 года назад

Wow. Love the Control Panel, looks very professional.

@WarpedPerception 2 года назад

Thank you

@Cyromantik Год назад

I like that anecdote about the Coal-Roller there at the end. XD I can imagine looking at a Tesla with flames and getting very confused.

@LegitStreetCars 2 года назад

This is the coolest thing I've ever seen! Can't wait to go for a ride!

@lesterparker1594 2 года назад

Got here from your link. Thanks. This was awesome

@crownhic6827 2 года назад

A Tesla for the Eisenhower!

@WarpedPerception 2 года назад

Thank you, absolutely, version 2 is going to be much better!

@jayk7781 2 года назад

That would be a cool Chicagoland collaboration.

@Scorpion7substance 2 года назад

In the near 2030's people will be like, man did you see that Tesla he just rolled cold gas thrusters on me LOL

@katashegamer1508 Год назад

11:38 that range rover guy be like :look ima head out without your jet engine .....

@cll1639 2 месяца назад

I am IMPRESSED. What a fabulous video; what an engineer.

@coreyfreeman6226 5 месяцев назад

I just get excited seeing beautiful work like this. May yet go for another degree this time in Mechanical engineering.

@firefrets8628 2 года назад

As a kid, I was mesmerized by the idea that a jet engine exists that I could hold in my hand. I always wanted to see them used for a purpose other than watching the shadow of a really cool looking RC plane doing fly-bys for 20 minutes. This is something I didn't know I needed and by far the coolest use I've seen for these other than the guy who used them to fly with what was essentially a jet pack. Great job man and I can't want for the next one. This is probably about to be famous.

@MickeyMishra 2 года назад

Feel the same way. I remember drawing Jet cars all the time as a kid. This really is a dream come true to see some someone do it. A dream that is now a reality. One of the best days ever!

@jontrudell7529 2 года назад

It would be cool to make the engine bracket able to start in that position, then once engines are running you could throw a switch & have the engine come Up & into the Airstream

@WarpedPerception 2 года назад

I was thinking about this but the subframe that I built to hold the jet engines is sort of like a giant lever, as I bring those engines higher further away from the fulcrum point I need even more reinforcements, and because of the material shortages even this setup was weaker than I wanted it... For someone that builds stuff material shortages are the worst thing very frustrating but what can we do.

@horhaygonzalas3025 2 года назад

YOU HAVE THINGS THAT MAKE YOU GO. SPOT-ON.

@racerex340 2 года назад

@@WarpedPerception yeah, I was thinking the same, people don't realize that the jet mount like that is a giant lever, the further the distance bring the thrust from the fulcrum, the more that force is multiplied at the fulcrum. The amount of extra reinforcing required just to raise the turbines by a foot would have been extraordinary, probably would have had no choice but to go through the trunk and bumper with additional tubing, also complicating any mechanism for raising and lowering the turbines up and down going in and out of the airstream. Amazing build Matt, I know that you only showed maybe 1% of what went into this, extraordinary!

@scotty305 2 года назад

@@WarpedPerception This was such a fun video. Maybe a movable air diverter that can guide air toward the jet intakes when you want to run them at full thrust?

@mojo3008 2 года назад

Agreed. Ram air is awesome even if you don't get much from it. He could also put cones on the front to scoop larger volumes of air. Or how about one feeding a giant turbo to the other two?

@howdynick1329 Год назад

hopfully you keep that in. that is so cool to have, including the epic control interface.

@hermitsgrotto3812 10 месяцев назад

love your enthusiasm, your builds are good.

@xopexindustries 2 года назад

If you have designed this much so far, you can design a cap that covers the front to go up and down so that you can mount the engines a little bit higher and get frame support from the hood as well as ram Air. I love your episodes and I aspire to be like you, someone with ideas and dreams, knowledge, skills and money to make it all happen. I really got tickled when you didn't let the truck roll call on you lol love it

@td389 Год назад

Lol 9:33, ally way is now clean of all dust and debris. 😆

@user-wu3uc9zb8c 5 месяцев назад

09:30 I bet your neighbors LOVE you... Awesome build!

@carklimar Год назад

extremely creative and highly talented all-round engineer, who is also extremely skilled in craftsmanship...respect...!

@motorhead969 2 года назад

my dream is to be an engineer who is interested, devoted and inspired, basically an engineer like you, good job sir!

@WarpedPerception 2 года назад

Thank you

@coyotehd816 2 года назад

It always blows my mind just what people are capable of creating with such astounding attention to detail!!! This was one of the coolest videos I have ever watched when you think about the work put in 🤯

@The_Roman_channel 3 месяца назад

I got to give you mad props because you are EXTREMELY TALENTED AND GIFTED. I'm actually jealous of you because you have some really killer ass talent

@sterlingstroebel7116 Год назад

Dude. Super cool video. Well done!!

@nicolaswhyte 2 года назад

From an engineer to other I take my hat off this video it's absolutly nuts keep working men

@WarpedPerception 2 года назад

Thank you man, you know engineers keep the world turning!

@ghostofwolverine6065 2 года назад

from another engineer i believe this could have been better with different mounts rather than behind which either sides or top of the car for proper air compression in turbines bad english for that i am sorry

@ghostofwolverine6065 2 года назад

is it legal ? in america ?

@ghostofwolverine6065 2 года назад

@@WarpedPerception i dont mean insult it is still very good design because atleast you have done it i dont know thrust of jets still lot of respect ,

@omgaclownmonkey Год назад

@@ghostofwolverine6065 Yes but then you are creating a lever between the point of thrust and the mass of the vehicle, increasing the mechanical requirements of the mounting structure. Also, let's say you put the engine above the car and the attachment breaks, it may injure the passengers in the car. For a demonstrative video, I think this is the correct design to minimize risk, mechanical requirements, and complexity.

@ModestNeophyte 2 года назад

I am amazed. I had no idea engines that small could produce that kind of thrust.

@joaovitordejesusrocha7346 2 года назад

that small turbine cam push a 1.5 tons car? wtf

@basic-decaf Год назад

They don't.

@nekopop8159 Год назад

They can if you have like 5 or 7 and it will move it. Also cars do not weigh a “ton”.

@basic-decaf Год назад

@@nekopop8159 Correct, the Tesla Model 3 weighs 3,949 lbs, which is 2 tons. That being said, you would not need 3,949 lbs of thrust to move a Tesla Model 3 on its wheels, but you'd certainly need more than ~100 lbs, which is a rough estimate of the thrust shown in this video.

@nekopop8159 Год назад

@@basic-decaf Whoa Tesla cars weigh that much?! Compared to normal cars which they are so much lighter. I guess I didn’t do my research on the Tesla’s weight because I assume they weigh as much as gas cars do, wow that battery weighs like a whopping thousand pounds.

@jeffreymelton2200 Год назад

You are one of the most amazing engineers I have ever seen on this platform. You know you are doing something right when you are garnering more views than your subscribers. Even when yo have nearly 1.5 M subscribers. I love the content keep up the good work. After watching more of the video, I can comfortably say that you are the best. No one one this platform turns out, production quality stuff such as you stuff. Also you are the most technically sound on the platform, because of yor vast skill set. ie; CAD, Welding, 3d modeling, jet propulsion etc. and lets not forget design. And by the way those are some perfect weld beads too!

@isaaclerma9005 Год назад

A video of you showing how you even come up with your ideas about your inventions and how you plan it all out and what steps and order would be freakin awesome. Love your shhhhhiiiiiij!!!!!!!

@1ssac1 2 года назад

Love the caption 8:40 when they crancking up - Music and Applause :)

@streetstylez96 2 года назад

The production lvl with the water jet and 3d printer is amazing. Everything looks so sick

@WarpedPerception 2 года назад

Thank you

@primovid 4 месяца назад

Incredible manufacturing and design skills *with* a true appreciation for artistic design! Very few people can do this!

@stuarthamilton5112 Год назад

Excellent taste in music. Truly excellent. Chair raving to jets.... feels Goodman. PRO TIP do not tail gate the jet powered Tesla.

@mattr4078 2 года назад

Just the fact you took this on the roads is mad, in New Zealand you would get the military on you for an act like this.

@snoopy5736 2 года назад

Hes in a third world city

@butwait 2 года назад

All 60 members of the armed forces

@newtonfirefly3584 2 года назад

Do You actually live in New Zealand ? Are You actually aware of the Authoritarian Laws there or are You exaggerating them as well ? Sincerely

@mattr4078 2 года назад

@@newtonfirefly3584 NZ like AUS has strict road laws. Pulled over for loud exhausts, low cars, window tint, mods that aren't done by mechanics can get you stickered etc.

@whyisthistakenlol Год назад

Matt R just enjoy da vid lol

@PressTube 2 года назад

Put this setup on Brooks plaid and let him run some consistent tests on a dragstrip and see how much it shaves of his times :)

@WarpedPerception 2 года назад

I don't know who Brooks is but I'ma look it up. I ordered a plaid like a year ago but cancelled because of the yolk, I will order one when the come with a steering wheel and stalks... Or swap my body on one. But the 0-60 isn't that much different, big difference over 70mph tho.

@PressTube 2 года назад

@@WarpedPerception Brooks is the guy that has the ‘Dragtimes’ channel ;)

@martinthe3rd664 2 года назад

@@WarpedPerception It's possible to retrofit a Model 3 steering wheel and stalks to a Plaid. Some guy on RU-vid did that already

@jayz3947 2 года назад

This is great engineering! Do you have a team or work alone?

@lemongavine 2 года назад

@@WarpedPerception you would really avoid a car because of the steering wheel 🤦‍♂️. Consensus is you get used to it quickly and actually like it.

@pvdrijdt 10 месяцев назад

Wow man. The way you do this is incredible. Never seen anything like ir. You must be a magic man. Wow again. And thank you very much for this.

@40NoNameFound-100-years-ago 11 месяцев назад

How can this channel be doing everything and doesn't have many may subscribers.? This guy masters many fields...he is a true legend engineer.

@-powerband-gamer-6117 2 года назад

I cannot believe how much air those 3 engines move, they will surely give you a boost on the highway.

@ibnewton8951 2 года назад

An enormous amount of work and time for negligible and impractical thrust, but it is novel for sure.

@horhaygonzalas3025 2 года назад

IF YOU RUN OUT OF ELECTRICITY FIRE UP THE ENGINES. BACKUP. SPOT-ON.

@racerex340 2 года назад

It's a start... More reinforcing, upgrade the middle engine to match the two end engines, maybe upgrade all three in the future. It would be more impressive on a lighter gas powered 2wd car that normally struggles with traction, the fact that it helps at all on one of the quickest performing 0-60 production cars in history shows that it's a serious kit. If Matt could ever upgrade this to double or triple the thrust over time, the performance would be much more impressive on a P85

@kevinburns8473 2 года назад

Impractical? Absolutely. Fun and cool as hell? Also absolutely!

@batesy67 2 года назад

@@horhaygonzalas3025 that would be a great test. How much battery regen did the jets give him.

@kobelrudolf1794 Год назад

With the jet engine, the mirrors were folded in, which certainly took a hundredth or two. Great video Greetings from Switzerland

@StiffPvtParts Год назад

At that one particular moment, you were the proud owner of the LOUDEST Tesla in the world! Kind of makes me wonder what the internal diagnostic of your Tesla thought about the whole ordeal when you were going 60 mph down a highway whilst in neutral xD

@vitorcalembo 2 года назад

Man, I'm very impressed how this engines that might have a low compression rate can put a heavy car at 60mph

@TTime685 2 года назад

Well they might have low compression but they move a ton of air/fuel.. like a turbocharged piston engine with low compression does. A jet engines power to weight ratio is unmatched. Not really surprising..

@vitorcalembo 2 года назад

@@TTime685 makes sense... There are a lot of Otto turbocharged engines that have low compression and brings a good performance.

@boxr_4214 2 года назад

@@TTime685 however, the thermodynamic efficiency of these engines seems to be complete crap. 2 gallons per minute at 60 mph, that’s 0.5 mpg.

@MrBen527 2 года назад

@@boxr_4214 That's jet power for ya

@Blox117 2 года назад

@@boxr_4214 thats for the whole setup tho

@fred5477 2 года назад

The kerosene hose is short to prevent you from fueling a diesel road vehicle with it. In very cold weather you would cut diesel fuel with Kerosene to lower the pour point and prevent gelling in the fuel filter. I used to keep an empty fuel can in my old Mercedes so I could fuel with Kero. The real issue is it's untaxed.

@ZERONEINNOVATIONS 2 года назад

Interesting didn't know that trick thankyou

@spinspittah9533 Год назад

I never saw any youtuber doing things this Neat. Every inch is under a standard

@atousonk Год назад

How can anyone possess such fabrication skill is beyond me this is true engineering man not the bs we mostly learn at the uni.

@moerow8215 2 года назад

If you could mechanically raise and lower the turbines into and out of the neutral air zone that could add more boost and save your turbine bearings from wearing out. Great job like always though.

@spamspace6878 2 года назад

If you're just worried about the bearings, you could add a system that covers the front part when not in use.

@jeffjackson6358 2 года назад

Wrong. These engines are tested on a test stand with zero movement and the larger two produce 67 Lbs of thrust each.

@deekay2899 2 года назад

@@jeffjackson6358 yh but even when they’re stationary, air isn’t hard to find, it’s literally plenty around still. Behind a fast ish moving car, it’s thin. I don’t know if you know about slipstreams and towing when it comes to racing, but in the wake of fast moving cars, the air immediately behind tgem is thinner, giving less resistance to trailing cars, thus making them need less fuel to maintain speed, as well as an acceleration advantage for easy overtakes, hence the term slipstream. Like the original comment said, I still feel like if it was raised from an air neutral zone, it would ge more powerful

@Deeveeaar 2 года назад

Thats the coolest thing ive seen on RU-vid this year! Finally a tesla i can appreciate 😂

@InSaN3ViSioN 2 года назад

All Tesla's are appreciated, fool.

@Deeveeaar 2 года назад

@@InSaN3ViSioN maybe by you and others. Im not that fond of them myself.

@watema3381 2 года назад

This is right under the V8 Tesla made by Rich

@WarpedPerception 2 года назад

Thanks man !!!

@WarpedPerception 2 года назад

@@InSaN3ViSioN well right now I'm on my way to PRI show in Indianapolis, when I left my studio my car said I would arrive with 4% battery remaining, I got 20 minutes away and it dropped to -34%, now I'm sitting here charging for about 2 hours.. I'm not appreciating the Tesla at this moment

@IRLand713 5 месяцев назад

This is awesome. When I was a kid I drew up "plans" to attach jet engines to a snowboard, so I could go uphill. Terrible idea haha

@doc-holiday Год назад

Very interesting i loved it. Fascinating to see the time difference.

@egliux1357 2 года назад

8:17 be like: welcome to Tesla airlines. Please strap in your seat belts.

@jessejuliano8056 2 года назад

LOL 'why would he cut me off'. Bro.. no one wants to be behind that shit lol. Cool video man.

@ddegn 2 года назад

I thought the same thing. Who wants to have their paint stripped by jet engine blast? Agreed. Very cool video! It was crazy fun to watch.

@Thedude897 2 года назад

Yeah if I seen some clapped out jet engine Tesla I would cut it off too lol.

@cryptosaffa3869 Год назад

Amazing and very talented, well done. Great sound!!

@user-sk1yd8kh7p 8 месяцев назад

That's a crazy engineering tools you have in by putting your idea together and surelly you mad it my friend

@diymicha2 2 года назад

DIY: Use the linear pots just with a knob on them as they are. Engineer: Builds a giant throttle lever like the ones in a plane, with totally obersized pushrods. :)

@hotosabjatahaiprabhoo..kar8081 2 года назад

That'd be shut

@jonathannoone4435 2 года назад

I love the way you apologise about not having the materials available due to supply shortages... so I built it what I had around. It kind of reminded me of when Doc Brown apologises to Marty about not having time to pain his entire model of Hill valley. Amazing skills and love how everything you have done is neat and tidy - even taking time over the in-car controls. Top job!

@WarpedPerception 2 года назад

Ha! Thanks !! Yeah I forgot about that part in the movie.

@1outlawtrucker Год назад

Dude the interior looks like it came from the factory big thumbs up

@Sparky18059 8 месяцев назад

Brother Your Amazing. You Deserve Everything Life Has To Offer You.

@wstnli725 Год назад

Gosh! You did it! Make it fly. You could create your own company. Incredible! ¡Buena suerte!

@Scott_C 2 года назад

After watching this I'm impressed that you... Don't have a press-break (for your hydraulic press) or a hossfeld bender, you've got practically every other tool. You could even make them with the tools you have. Seriously an amazing job on this.

@pattas2005 2 года назад

12:35 - "I don't know what that warning was" - Probably the Tesla Autopilot thinking "WTF IS HAPPENING!!" Awesome video!

@WarpedPerception 2 года назад

Yeah that was weird... I've never heard that warning before. Thanks

@Dennis-ln6tv Год назад

i wished i was as talented as you in eletronics and crafting machine parts... you are amazing.. i'm looking forward to see your next outstanding videos

@Livinthedronelife Год назад

Crazy How talented you are Sir , Awesome video!!!!!!!

@surfbyrd1 2 года назад

You're the greatest! I love the spit 8MM socket at 6:27! Thank you for doing these! I'm a disabled Vietnam Vet that can't do these things anymore but it's like I'm doing them with you. All the frustrations included with all the success! God Bless you!

@WarpedPerception 2 года назад

Thank you! I saw that during the edit and I was wondering who was going to call that out, I didn't notice that when I was building it. Thanks for watching my videos and thanks for your service!! 🇺🇸

@SPDProduction 2 года назад

13:56 people said What the dog doing in the gas station 🗿

@guypool7524 Год назад

Well at the start of today, I'd never thought I would be watching a video on a jet powered Tesla!

@cal88usa 11 месяцев назад

This is so spectacular. You are a genius. OMG what can’t you do.

@flyin32hawaiian 2 года назад

Probably one of the best videos I’ve ever seen. The skill and craftsmanship to build this is top tier.

@zollotech 2 года назад

That build was amazing.

@foxxo-dev Год назад

Imagine being behind him

@shan_singh Год назад

in what context?

@Amocles Год назад

Bro I know I'm like doo doo doo doo doo driving down the road what's for dinner oh shit that guy's car is on fire what the fuck

@receptayyip1410 Год назад

It even did not blow the trash bins standing behind off the street.

@lawestwood5160 Год назад

@@shan_singh bro like behind his carr wtf

@kns67 Год назад

Great idea and execution! No to mention Brave!!! :)

@airgunningyup 2 года назад

awesome , shocking how much thrust these small turbines produce. must have some small brushless starters on these engines. this is the most incredible thing ive seen on youtube in a while;..

@peterzingler6221 2 года назад

Starters are brushed

@airgunningyup 2 года назад

@@peterzingler6221 very interesting

@joeyl3545 2 года назад

This is the best 30 minutes I've spent on the internet in the last year. I tinker all the time but even if I had your great workshop I would never have thought of this idea. keep up the great work! Thanks!!