Thanks for all of the setup tips, and the heads up on Tamiya clear yellow. I'm gonna put clear yellow on my light kit to dim it down. Also working on putting Zippo flints in my bumper, also using gold and silver leaf to accent underneath
You wellcome bro 😎 sounds like is goin to come up bad ass 👌🏻same here I’m adding some chrome parts that redcat came out with they arrived today, I’m also working on a clear kit I’m half way to get it done just waiting on some dry flakes n a few other things I need hope it comes up looking nice is my 1st doin doin on a scale model 😎
My man! You got that ‘6-4 lookin real clean!!! Thanks for the tip on the throttle, something I didn’t even think of doing. I’m like you, I didn’t like the front end raising up as soon as I hit the throttle!!!
Thanks you bro 😎👌🏻you wellcome I’m glad it can help you out !! Yea they put to much speed on it because at soonest you pull up that throttle the front raises up but with this settings will make it slow then but will it will pick up fast but without raising up from the from 👌🏻😎
@@soy1de3aztlan hey bro how is it going? So I just got the tiny tv for my redcat 64 however I’m having issues with connecting it to the 6 speakers I have.do you think I might need an amp?
@@JoseRivera-mj9fx it might be that it needs a amp or a stronger battery!!! Is picking up sound ? An is the sound distortion ? Or is not picking up no sound at all ?
@@soy1de3aztlan well I connected the tv to the speakers (6) it sounds but on a low volume of I crank up the volume the sounds turns into a static noise
Thank you bro !!!Yes I didn’t talk about the end points!!but go to settings like I did on the video scroll down to where it said endpoints then get on there is goin to show you from channel 1 to 6 now the front servo will be channel 3 to make it hop or to go high or low!! Channel 5 an 6 are the back servos , what you wan to do it go to channel 5 then you can make your servo horn go up or down to your desire high or lowered fo the same with channel 6 if is hitting the back bumper when you do 3wheel I wan to make it go higher not to much also check channel 6 then just make sure that channel 5 an 6 are level the same high after that press Saved for a min turn off your remote an turn on !! You should be all set n ready to hit em 3wheels without rubbing the back bumper!! Or an easy way is when you doin 3wheel on tne back Conner that it hitting just raise it up just a bit so it won’t be rubbing !! 👌🏻😎
Have you check you steering servo ? It might be that there’s been alots of bad steering servos !!! It should work perfect but if is doin that it might be that the steering servo is giving up !!!
You wellcome bro 😎 yea look him up as 3Dscaleparts.com he’s name is Mike he also has a continental kit a few other parts just look on the 1/10 section it will show up everything he has for the 1/10 model !!
Hey man! So I just got my 6-4 yesterday and for some reason it will not reverse I’ve tried just about everything I could think of just was wondering if you can think of what’s wrong with it and dope lookin ride
Thanks 😎!!! That’s wierd no Matter what it should reverse without a problem or messing with the settings!! Something might be wrong with the motor or the transmitter!! You should get in touch with redcat n see what’s the problem if there’s a problem they have to give you a new one the car has a year warranty!!!
From 3Dscaleparts.com !! Is been a while I think it was like $25 but now I got all my chain steering wheels form jevries he has chrome /gold they go for $29 for the chrome one an $32 for the gold one they look real nice !!!
I had try before a few things like sandpaper,hot water an so on but it seen like nothing works good at the end!! Besides they don’t look right wen it comes to paint em I just left em alone a while back right after jevries came out with the jevries true 13’s an now not to long ago redcat came out with em redcat Daytons so if I where you i would just get some jevries true 13’s or some redcat Daytons , they are even cheaper an better quality an dope looking 😎👍🏼
@@soy1de3aztlan wear did you get the little Mexican style blanket that’s in the back window of your car on the video that’s pretty cool I’d love to have one to put in a mint green 64. Did you make it or order it online if you ordered it if you could, please tell me where that be great if I’ve been looking for the old-school style stuff to put in my car.
@@bryanflott2767 the “Mexican mini zarape”the “Mexican blanket “ one of my friends made a trip to jalisco mexico an he brought me a small gift that had the Mexican zarape the blanket, an I just took it n put it on the 64 !!! But I don’t remember where but I had seen on line this guy that had em made for scale cars !!! Look it up on geogle or Ebay as “Mexican Zarape “ it should pop up or type “Mexican zarape for scale cars !!
@@soy1de3aztlan Thanks man! I ordered it this morning. I did the Real Sticky interior kit (white trim) & then I added white dingle balls. Also installed chassis led blue lights. Next I'm gonna chrome out suspension & maybe install spark sticks at rear bumper so it sparks when the rear end drags. When I finally get done with most of what I want to do then I'll install stickers & antennas
@@M.L.1 yea bro it goin to look bad ass !!! I wan to installed the spark sticks too i found em on eBay they only thing is holding me back is the mount bracket or the mount block I haven’t seen it around I don’t have a 3dprinter so is hard to get it !!! That also helps for the back bumper not to scrape on the ground!!!
Thanks homie !!! Yea they fit on it good without a problem! The only thing is that it sit lower but that’s about it no big deal 😎😎!! Yea I might do the skirts or maybe the bumper kit they look real cool !!! Might modify the bumper kit to put a wire wheel on it 😎👌🏻
@@HOGSIDESJTV14BOSSHOGRECORDS I feel you I was thinking the same thing an do a candy green with a grey top with patterns but it is a little pricey + have to buy other light kit that is like $48 😓😓
@@HOGSIDESJTV14BOSSHOGRECORDS lol that’s right homie I feel you on that I don’t have a impala but I do have a 95 town car but there’s to much money goin in to em 😓😓lol an adding this new hobby hell some things I think I can buy spend this money on my 95 then on this toy but is cool is fun lol
@@chatobalencian1504 you wellcome bro yea I did a few adjustments on it !! Like you can have the car turn on then go to the channel you wan to modified then if you pull down the switch then pres down on the 100% you goin to see an arrow now pull up the switch n the arrow is goin to moved to the right that’s for how high you wan that wheel down is how low you wan it to go !! Will you moving # you goin to see the car goin down or goin up !!!
I just got my son one and used for literally one hr already went out!!! Are the gears cheap?? I dont know what it is for 600 bucks unpaid I think it sucks
Damm that’s not good at all bro you should get in touch with redcat let em know they should take care of it !!! Paying $600 an lasting only for one hour probably something came defected on it !! I been having mines sence the 1st batch that came out till now is been working fine I had play with it till the battery goes dead!!
Hey homie how u been? I can’t find your email ,I wanna send you a short video of my new build custom 64/59 chassis with full drop in tub lol hmu so I can send it to you
Hey was up homie!! Been oright just been having some problems with my back that why I haven’t been around that much , how about you bro haven’t heard from you In a good min lol !!! Oyea damm that’s sound real cool 😁😎
Hey how’s goin bro 😎yea I end up getting the 59 😁yea I was on line for the 1st time !! I thought I was goin to get one of the 1st ones but that was fast I place the Oder right after they had it available but I got the #247/1000
@@6ickness1 yea I did last night I received it like 2 days but didn’t get to open it till las night I got allmost all together I still got to fix the skirts the rub on the wheels but I got the kit light on it i got the skirts just need to add the foam tape hope I can take a video to uploaded tonight!!! How was yours ? It’s real nice it did blow mi mind away 😁
No for that you will need to add or take of em metal plates , or when ever you hopping it don’t droop the from all the way down raised it up a little till you get how you wan it !!!!
@@soy1de3aztlan I think I have to much weight in the front and middle .I have moved all the electronics and added an interior also 6 Bluetooth speakers
@@soy1de3aztlan I just uploaded a short vid of my sixty four on my RU-vid channel it’s still a lot of work to be done but so far it’s coming along except for the front servo issue
