John Deere 425 445 455 Rear PTO Install 

You are welcome man, glad I could help. The 3 point will be much cheaper and more useful in my opinion, the rear PTO is very pricey and you will only get so much use. In fact, I never really used it and my buddy Steven hasn't either. Thanks for watching.

@@FloridaDeere I understand but if I wanted to put the gear on mine. Does the whole set up come together like the one you took off I hope I asked the right question thanks for any help

@@trw_53 The rear PTO kit can come in varying degrees of completeness. Ones with just the hardware, but no switch, or it doesn't have a guard, maybe one missing a lever, who knows. When you examine a kit for sale, just make sure it comes with all the required part. Have the seller provide proof of all parts if possible. You can use them for tillers, a flail mower, finish mower and maybe even a stump grinder along with other equipment, but they are still small tractors. My PTO kit was complete. If you don't find a complete one, it's not necessarily something you should pass on if you can source the missing parts. Just make sure you are paying a discounted rate.

@@FloridaDeere thanks for all your help 👍

So, the shaft is actually an extra believe it or not and not a cheap one. It's just a ball press and release. If you slide the stubby into the PTO, it will click and it's in there, no more difficult than that. I hope that clears it up. Thanks for watching.

eBay and my buddy Thomas often has ones available, but they seem to never come cheap. Go to the page info and contact me via email or text and I will shoot you Thomas's contact and keep checking eBay as well. Thanks for watching.

I can't remember the part number off hand, they are a NLA part, but you could find them on eBay would be the most likely spot to grab one. Thanks for watching.

I got mine through someone on eBay when it popped up for about $650, which seems super cheap now, but was probably about average, maybe a hair less than average at the time. It came complete with everything, which was good, you have to understand and make sure that you get the entire unit and not just part of it. Some units are sold as partials, Meaning they may come with most of the stuff, but may be missing say, the shield or a wiring harness. You want to try to get the whole things as tracking down more parts could be both difficult and expensive. But as you can assume about what I've said so far, they are NLA from Deere, so you will likely have to find a nice used one like I did. They are out there, you just have to be patient and have your checkbook handy. Another way to come upon one is finding a tractor with one already on it. Maybe the tractor is beat up. In that case you can buy the tractor, sell it for whatever and yank the PTO and put it on yours if you get a good enough deal. And no, the ones for the X series will not work unfortunately. Thanks for watching. My buddy Thomas, who often comments on my video, usually poor attempts at comedy🤣, buys and sells tractors and parts through his company Vintage Green Iron. I'll see what he has available, they usually go quickly, but you never know.

Ugh, hard to say, I had not experienced that issue myself, at least not on that tractor. I did just have a minor issue on a diverter valve on my 1023's third function. A few taps with a brass hammer fixed that. I find the hammer works for a lot of things if used gently. Thanks for watching.

Honestly I'm not sure, but it is a NLA part, so you'd have to find a used one on eBay most likely or with a great deal of luck stumble upon one on a tractor for sale. And they don't come cheap, I'd expect to pay over $1000.

Thanks man, my aim is to provide info that either not out there already or provide a different perspective on some material that is out there already. Thanks for watching.

Black RTV, seemed to work fine the first time around.

Ha, that's how I started posting videos originally. I'd go to RU-vid when I wanted to learn something and if I couldn't find it , I'd do a video. Wish I understood the whole RU-vid thing way back than.....as if I truly understand it now.

Thanks, the first time, I had directions and Steven had printed them out for this time, but it was pretty straightforward. The funny thing was I gave the in-between guy all the books and manuals and he didn't have them for Steven, he said he was going to return them to me, which was weird and also it hadn't happened yet.

Sounds like maybe a clutch or belt issue?

To be honest, I liked the HDAP's better. However, I do have R4's on my 1023E, but may go to Versa Turfs or the HDAP's when the time comes. I don't hate R4's as much as some hate on them, but they aren't the perfect tire either.

They come up on eBay every now and then. If you are really lucky, you may stumble upon one on a parts or resale tractor. They go from $600 to maybe past $1000. The older 300 series rear PTO, which is generally worthless is not over $1100-1400 on eBay. I say worthless because there aren't many 2000 rpm attachments, as opposed to 540 rpm attachments. Thanks for watching.

No I believe the X400/500 series requires an entirely different PTO. I will be doing some videos coming up on the 585/595 series before year's end. Thanks fro watching.

The 455 is a great tractor. I have never owned one but hope to one day. I have had a 445 and 425 AWS, the AWS are great mowing tractors. Plenty good for other things too. Thanks for watching.

@@FloridaDeere yea i stumble on this one in a trade . i got it home put some new fluids an filter in it . turn the key an she fired right up no smoke no blow by no nothing . beside needing new tire's side panels an a hood . couple oil ring's in the rear end replaced due to leaking . one thing has me stumped atm is the PTO. every where i looked people say i might have a cut in a oil ring behind the back plate . that engages the Pto . i took the deck off it to sand it down to repaint it. I was going to sell it . but i don't know much about it to even say what it could go for . like you said. it is a very good mower cuts very good . i might not do a full restore on it. i might just fix the problems it has an just sell it to some one who wants to fully restores it ;)

I just got a 455 all wheel steer myself. Got it free because the previous owner put gas in it and it started making funny noises. (imagine that) Well, Changed the oil and flushed the fuel system and the engine sounds great. Rest of the machine needs work. Deck lift cylinder leaking bad and deck not lifting. Pulling the deck tomorrow and EVERYTHING is getting greased. Thinking hard about putting oil and temp gauges on it because it already looks like hell so why not?

Chad, I am checking some of my Deere friends for one, I will get back to you...hopefully with their contact info. Also, thanks for watching.

That would be amazing. I run a landscaping business (2nd year) and just added a 445 to my fleet. I want to expand the usability of it. Thank you so much for getting back to me. I wasn’t expecting it.

@@chadkrcma1013 No problem man, but they are pricey though. Just warning you.

@@FloridaDeere From what I’ve seen I understand that. I’m assuming it’s going to be over a grand

@@chadkrcma1013 About that give or take, both guys I know don't have one available. My very local contact has two available for the next series up, the X4/7 series, but only one on his 445 but he intends to keep it.

It's funny you say that, his 455 has 4XX hours, my old 445, his now and now sold again had over 1030 hours, so he opted to keep the "newer" differential. However, he had several issues with the lower hour diff and in hindsight, that may have been the best course of action. Old hindsight being 20/20....

@@FloridaDeere What kind of issues did he have? Some leaks?

@@jbmortensen There were no known leaks, the diff in the 455 had less than half the hours, so we switched the PTO versus changing out the rear diff. Thanks for watching.