Jointer & Planer Stand with Dust Collection!

Подписаться 235 тыс.

Просмотров 398 тыс.

50% 1

This jointer and planer combo stand with integrated dust collection makes the ultimate all in one board milling station!
Like these videos? Support me on Patreon: / oneminuteworkbench
Buy the plans: oneminuteworkbench.com/produc...
Have a question? Hit me up on social media:
Facebook & Instagram: @oneminuteworkbench
Twitter: @oneminworkbench
Find more cool stuff at: oneminuteworkbench.com

Хобби

Опубликовано:

3 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 628

@I_love_liberal_tears 3 года назад

So I downloaded your plans, but there is something that looks different to me. The plans are telling me to use 1/2" and 1/4",, when it looks like in your video you are using 3/4" and 1/2". Maybe its just my eyes I dont know. Also, after downloading the plans I see there are different ones. I am 5 foot 10 inches, but I have a bad back and don't want to be bending over to much. Do you think it would be better for me to go with the taller plans instead?

@OneMinuteWorkbench 3 года назад

Michael, thanks for buying plans! The build is 1/2” & 1/4”, and that is indeed what I used in my personal build. It is more than strong enough...using thicker material would increase weight and cost, but not performance. So, stick with the plans and you’ll be fine. Now, I’m 5’10” as well, and the standard plans are built so that I can joint and plane boards without having to engage my shoulders. This means I use my legs for the majority of movements, which helps prevent shoulder injuries. The best way to to see if it works for you is to build a temporary stand (by stacking material, maybe), and setting your tools on the temporary stand. Make sure the tables of your tools are at the same height as they would be in the final build specified in the plans. Then do some test cuts. If you don’t like it, move it up or down until you like the way it works. With that info, you can customize the build to be just right for you. I hope this helps! If you need anything else, feel free to reach out. FYI, the best way to reach me is email. I don’t always see all the comments. Best of luck!

@I_love_liberal_tears 3 года назад

@@OneMinuteWorkbench Ok, thank you for getting back to me

@victorapodaca679 4 месяца назад

Or you can change the caster wheel size to a larger size or add shims between the casters and the cabinet to raise the work height if it is determined that you need another inch or so.

@mrpogueman 4 года назад

I really appreciate how much you continue to contribute to the woodworking community without crazy expensive gear, really highlighting that anyone can do this and not be limited to their available tools

@OneMinuteWorkbench 4 года назад

Thank you, Brandon! I'm glad you're enjoying the channel!

@dwayneford1990 3 года назад

One of my favorite builds of all time. So simple, so elegant. Space saving genius.

@merlinsatrom9142 3 года назад

Brilliant! Great for a small shop like mine that’s a double car garage that has to have room for the cars all winter! Thank you for sharing your creativity!

@OneMinuteWorkbench 3 года назад

I’m glad you found it helpful!

@ericrickert3045 Год назад

I love the board holding up the bucket! Great design!

@scootersworkbench6347 5 лет назад

Great project. Will definitely watch again when I can get the planar and jointer. Thanks for sharing!

@OneMinuteWorkbench 5 лет назад

Thank you - I'm glad you like it! It should fit a wide variety of jointers and planers, so don't think you have to buy the exact ones I have. If you do build one, let me know how it goes!

@josephmartinez2231 4 года назад

Straight forward design that fits most people’s workflow in smaller shop areas or garages (my people) awesome

@OneMinuteWorkbench 4 года назад

Thank you! I'm glad you dig it!

@lancewarthen 2 года назад

So many tips that a novice woodworker never knew. Love it. Thanks.

@hidingfromu5293 Год назад

Well thought out. Nice job.

@stevenrayhoward 4 года назад

Just found and watched (RU-vid recommendation) your video! Awesome shop space saving solution. This gave me some excellent ideas... Thanks so much for sharing!

@sunburstmike8745 5 лет назад

You are an excellent craftsman ... esp. for things and types of builds we amateurs would be doing. Your "thinking on the fly" solutions are great. Keep up the good work!

@OneMinuteWorkbench 5 лет назад

Thank you - I'm glad you're liking the channel!

@mrskwrl 4 года назад

The best thought out and well executed station I've seen yet. Saving this for later.

@erichumbert810 Год назад

Awesome project!

@Mrhvac 4 года назад

That is really nice. I absolutely love this build. I will buy those plans when I'm ready to make my own.

@OneMinuteWorkbench 4 года назад

Thank you - I'm glad you dig it!

@jimlahey5354 Год назад

Smooth bro, real smooth.

@drkylepeck 5 лет назад

Nice! Loved it. Thanks for sharing the plans.

@OneMinuteWorkbench 5 лет назад

Thanks! I'm glad you enjoyed it!

@micromike8391 5 лет назад

Great job! Very efficient putting both machines into one milling station.

@OneMinuteWorkbench 5 лет назад

Thank you! I'm glad you enjoyed the video!

@WoodNerds 4 года назад

Perfect setup! Thanks for sharing!

@OneMinuteWorkbench 3 года назад

I'm glad you enjoyed the project!

@coreygrua3271 5 лет назад

Very practical solutions to common problems. Why let companies have all the design fun? Bravo!

@OneMinuteWorkbench 5 лет назад

That's what I'm saying!

@biologistangler7901 2 года назад

Thanks for making this and providing the plans for purchase, this is exactly what I was looking for; I even have the same jointer.

@greghamilton5872 4 года назад

Wow! Thanks Tommy! What a great video with some awesome tips. I like that you include your mistakes and how you corrected them. I really appreciate that! I'm looking forwards to more of your video tutorials.

@OneMinuteWorkbench 4 года назад

Thank you, Greg! I'm glad you enjoyed this, and I hope you enjoy exploring my other videos!

@aaudain1 4 года назад

Wow that's awesome great job

@nathanwooler8047 4 года назад

I like the design! I have the exact same jointer and thickness planer so it was great to see something built specifically for what I already have. Good job!

@OneMinuteWorkbench 4 года назад

Thank you!

@williambranham6249 5 лет назад

Thanks. I just get excited when I see something I can use to make my shop better.

@OneMinuteWorkbench 5 лет назад

You're very welcome, William! If you build one, let me know how it turns out!

@matthewsutton3682 4 года назад

Very well thought out

@OneMinuteWorkbench 4 года назад

Thank you!

@treggliebler6237 3 года назад

Very nice setup.

@SouthernGinger 5 лет назад

Very nice project! Thanks for sharing!

@OneMinuteWorkbench 5 лет назад

Thanks! I'm glad you dig it!

@daveknott4563 3 года назад

brilliant on the seal! congrats on a great build and video!

@dlove118 4 года назад

Love the build. Drill and countersink in one is a great little pickup to save a step when assembling. Speeds up your efficiency.

@OneMinuteWorkbench 4 года назад

Thank you!

@ecaff9515 5 лет назад

Excellent video and process. Thank you for the inspiration and the excellent plans.

@OneMinuteWorkbench 5 лет назад

Thank you! I'm glad you dig it!

@dreamlookautodetailingauto3353 2 года назад

Wow thats awesome! 👌

@sicstringerman 4 года назад

Awesome job. So nice. Thanks for the inspiration.

@OneMinuteWorkbench 4 года назад

Thank you! I'm glad you found it inspirational!

@claudebieniek385 3 года назад

Damn that’s nice, great thought put into it. Great craftsmanship

@johngunning2123 4 года назад

Brilliant!

@BunchiMajul 5 лет назад

Great built Tommy, really complete and full of awesome features 👏👏👏

@OneMinuteWorkbench 5 лет назад

Thanks, Bunchi!

@jeremyspecce 5 лет назад

Pretty impressed. I really wasn't even going to watch this because i didn't think it really applied to me, but i really enjoyed your project and it looks super functional. The way you incorporated the vac and dust deputy to the cart really is very slick and your bucket method is very creative and obviously effective.

@OneMinuteWorkbench 5 лет назад

Thank you! I take that as a great compliment and I appreciate it very much!

@craigwesson1788 3 года назад

Very well done !

@OneMinuteWorkbench 3 года назад

Many thanks!

@dirtybaywoodshop-joeporter5650 4 года назад

I love this idea so much! A great way to maximize space in a small shop like mine. Awesome video!

@OneMinuteWorkbench 4 года назад

Thank you! Glad you like it!

@alfredjealouse7040 5 лет назад

I really enjoyed this video man! It was great to hear the thought processes you were going through whilst building it. A really inspirational approach and video!

@OneMinuteWorkbench 5 лет назад

Thank you for a wonderful compliment! I'm glad you enjoyed it!

@vksubra1953 5 лет назад

That's a nice simple solution. Thanks for sharing

@OneMinuteWorkbench 5 лет назад

Thanks and you're welcome! I'm glad you dig it!

@jasonwest2064 Год назад

Great job

@AngieWilliamsDesigns 5 лет назад

This is a great project. Thanks for sharing.

@OneMinuteWorkbench 5 лет назад

Thanks & you're welcome! I'm glad you enjoyed it!

@StuffUCanMake 5 лет назад

Brilliant design!!

@OneMinuteWorkbench 5 лет назад

Thank you!

@jbb5470 5 лет назад

What a great idea! I work in my garage where space is at a premium and this would work great. Thank you for the video and the download. Really enjoy your channel and the cleaver projects you come up with!

@OneMinuteWorkbench 5 лет назад

Thank you - I appreciate the compliments! I'm not quite done with the plans yet, but hope to have them done today...tomorrow at the latest. Thanks again!

@stevenkennedy3911 5 лет назад

This is my new favorite channel. I love the flexibility of the dust collection system. I started making a similar cabinet today except I have added a folding out feed table for the planer. It also helps the reduce the noise of the vacuum when the jointer is running.

@OneMinuteWorkbench 5 лет назад

Thank you for the awesome compliment of being your new fav! Good luck with your build. Let me know how it turns out!

@GraspHisLove 4 года назад

This is old but I’d love to see the out feed on the planer

@chrishayes6057 5 лет назад

Yet another great idea and terrific video!

@OneMinuteWorkbench 5 лет назад

Thanks, Chris!

@antonio7815 5 лет назад

Very practical table, good job. Thanks

@OneMinuteWorkbench 5 лет назад

Thank you! Glad you enjoyed it!

@tonycabero 5 лет назад

Excellent design and build!

@OneMinuteWorkbench 5 лет назад

Thank you, Tony!

@Rocketfua21 5 лет назад

Tommy, you sir have ascended high in the esteemed ranks of makers and RU-vid creators to become my #1 source for DIY shop furniture, shop systems and fixtures. Coincidentally, I have some of the same equipment. Everything you build is ingenious (well thought out, not too expensive and easy to build). For the time being, until I 'pull the trigger' on whether to build a shed/shop in the back yard, or convert a bedroom into a shop, (no garage) I have a growing collection of shop tools and equipment, all still in boxes. This jointer and planer combo stand with integrated dust collection is near the top of my priority shop to do list. Your 'simple track saw' will probably be the 1st. So thanks for the inspiration Tommy, and please continue to build great projects and videos.

@OneMinuteWorkbench 5 лет назад

Thank you! Those some are some very solid compliments, and I really appreciate you taking the time to let me know how much you're enjoying my channel. Good luck getting your shop set up. Hopefully you'll be able to get all those tools out of their boxes before too long!

@Lutzboater 5 лет назад

Excellent design and execution.

@OneMinuteWorkbench 5 лет назад

Thank you!

@Dutchshedwoodshop 5 лет назад

Wow.. stop making me jealous all the time 😂 !!

@mambojambostudio 4 года назад

this is amazing

@peterherz5942 5 лет назад

Thank you for the brilliant video.

@OneMinuteWorkbench 5 лет назад

I'm glad you liked it!

@parapente725 4 года назад

So I bought the plans and mede his tall version. Everyone that comes in the shop loves it, all the storage, dust collection.... wow, that 5 gallon bucket fills so fast with planner I am thinking of removing the planner and replacing it with some other shop tool. It was a very fun project to do, pretty easy. Thanks for the idea!

@OneMinuteWorkbench 4 года назад

Thanks for being a customer and for sharing your experience! I used to have a big bin for my planer, but I personally enjoy dumping the smaller one more frequently than the larger one less often...it was a pain and real mess. That said, before you move the planer somewhere else, you could just hook it up to a larger bin that is more stationary...or at least easy to move around. Let me know what you think!

@markprocopio 5 лет назад

Very slick! Another awesome video. Thanks!

@OneMinuteWorkbench 5 лет назад

Thank you! Glad you like it!

@timflanigan8586 5 лет назад

The bucket retention is pure genius!

@OneMinuteWorkbench 5 лет назад

Thanks...I don't know if it's genius though, it was just the absolute simplest way I could think to make it work! I'm glad you dig it!

@bethanymay3056 3 года назад

Brilliant!!! You made this look so easy!! LOL

@Pyronics 5 лет назад

Great build!

@OneMinuteWorkbench 5 лет назад

Thanks!

@earljenkins6278 2 года назад

My Dewalt 735 planer just came in last night. I have been wanting this planer for a LONG time. I first watched this video about a year or so ago and immediately knew that when I got my planer, this was the plan I was going to use to set up my milling station. I just bought your plans this morning and I am hoping to start the build this weekend. Thank you for sharing and making the price of the plans affordable. Please continue to provide us rookies with great content! Again, Thank you

@OneMinuteWorkbench 2 года назад

Congrats on your new planer, thanks for buying plans, and good luck with the build! Also, thanks for letting me know you’ve been enjoying the channel - it makes my day 🙂

@benjaminrauschenbach6084 5 лет назад

Awesome dust extraction system!

@OneMinuteWorkbench 5 лет назад

Thank you! Glad you think so!

@OneMinuteWorkbench 5 лет назад

I can't begin to tell you guys how long I've been wanting to build this board milling station. It was such a pain to setup for jointing and planing before, and it is such a breeze now. Words can't describe how thrilled I am. Let me know what you think!

@darinnetherland3466 3 года назад

One Minute Workbench curious if you’ve had issues with your machines getting clogged up with waste. I’ve heard from a lot of people that shopvacs don’t have enough power to pull heavy waste that comes out of jointers and planers, and you need a dedicated 1-2HP dust collector for them.

@funfreq9282 3 года назад

Nice build idea!

@OneMinuteWorkbench 3 года назад

Thank you!

@alastairmackay4589 4 года назад

Excellent job. Very clever. 👍

@OneMinuteWorkbench 4 года назад

Thank you!

@dougwilke9253 5 лет назад

Great idea, I like the build.

@OneMinuteWorkbench 5 лет назад

Thank you!

@renobtankit6019 4 года назад

Nice build, well done.

@OneMinuteWorkbench 4 года назад

Thank you so much! I'm glad you enjoyed it!

@mirlor11 3 года назад

very clean work! the drawers came out looking nice

@OneMinuteWorkbench 3 года назад

Thank you!

@bryangittings4197 5 лет назад

That's an awsome milling station great video

@OneMinuteWorkbench 5 лет назад

Thanks!

@cancelchannel3394 Год назад

Great space saving unit, very efficient 👍👍🙂

@randyrodriguez4643 5 лет назад

Clever as hell! I've not seen another setup quite like this one, kudos.

@OneMinuteWorkbench 5 лет назад

Thanks, Randy!

@billysalisbury8074 3 года назад

Good job Tommy!

@OneMinuteWorkbench 3 года назад

Thanks!

@nickb.237 5 лет назад

What an amazing build man!

@OneMinuteWorkbench 5 лет назад

Thanks! I'm glad you dig it!

@markyour6998 5 лет назад

Hi love your quality and aesthetic approach. Like the detailed plans too.

@OneMinuteWorkbench 5 лет назад

Thank you - I appreciate the compliment! Sounds like you bought the plans; thanks for that also! Let me know how it goes with your build!

@SmallWorkshopGuy 5 лет назад

Wow, Tommy, that was great and a good idea to combine the two. If I had not already build two separate cabinets, I would definitely be doing this build. Great video (sound, explanation, closeups, etc.) . Very, very good job. Your channel has some great content and certainly shows those building out their small workshop how to build many things for themselves vs purchasing. Good for you!

@OneMinuteWorkbench 5 лет назад

Thank you for the wonderful compliments!

@123joshmallett 5 лет назад

Awesome build! I shall have one

@OneMinuteWorkbench 5 лет назад

Thanks! If you do build one, let me know how it turns out!

@adriandoan5371 4 года назад

Thank you for a great video

@OneMinuteWorkbench 4 года назад

I'm glad you dig it!

@vpreston20 11 месяцев назад

I bought the plans for this some time ago when I decided to buy a planer and have wanted to build it since. It was perfect because I have the same jointer and planer as you do in the video. I finally built it and finished it today and it is a nice addition to my shop. I modified the plans only slightly so the stand would have the same look and feel as other cabinets and projects in my shop. I used a white Formica laminate on the top horizontal surfaces and trimmed the edges with 1/2" red oak to hide the plywood edges and give it a finished looked. Used the same wooden drawer pulls I have on my other cabinets as well. I also used 3/4" ply for the base. Don't know if it needed that, but I had it on hand so decided to use it. The rest is according to the awesome plans and video. Thanks Tommy! I enjoy your videos.

@mimsphilip59 5 лет назад

Great build

@OneMinuteWorkbench 5 лет назад

Thank you!

@robwagner2789 5 лет назад

Great build and very good use of space. The best trick in this whole thing is having the cyclone on top in the dead space between machines and the bucket down below - that totally makes everything work! (I've got some rethinking to do for my shop...)

@OneMinuteWorkbench 5 лет назад

Thanks, Rob! I'm glad this project got you thinking about efficient use of space...that's pretty much what my channel is all about! Good luck!

@AUOffroad 4 года назад

Awesome work station. I will need to make one for my shop!

@OneMinuteWorkbench 4 года назад

Thank you, and good luck with the project!

@mickey533 4 года назад

Very nice!

@OneMinuteWorkbench 4 года назад

Thank you!

@GKChandlerBooks 5 лет назад

I really appreciate your demonstration of the usefulness of a 3D printer to the woodworker. Very practical application.

@OneMinuteWorkbench 5 лет назад

Thanks! I'm glad you got something out of it. I think there's a lot of misinformation out there about 3D printing. Some people think they are only for printing Yoda bobble-heads and other toys, or that 3D printed parts aren't durable enough for actual use. If plastic is the best material for a part, then a 3D printer is great for one-offs like those vacuum adapters. I'd like to incorporate more 3D printing into my videos, but only when it makes sense - we'll see. Thanks again!

@GKChandlerBooks 5 лет назад

I enjoy 3D fabrication, but invested in a CNC router before a 3D printer. It was the right choice for me, but I love the idea of creating parts, as needed. I look forward to future videos.

@paulbrosher2943 5 лет назад

Great video and really like the concept

@OneMinuteWorkbench 5 лет назад

Thanks, I'm glad you like it!

@Timshowtomake 5 лет назад

the bucket sealing is very very clever ;-)

@OneMinuteWorkbench 5 лет назад

Thanks! I'm glad you dig it!

@tonymaiettasr.7340 4 года назад

This is how I'll replace the lost gasket seal on my whole house vacuum. I inadvertently threw it in the trash and they don't make my model anymore and couldn't find a replacement ANYWHERE! You're a genius. I have the Dewalt but now need to get the jointer. I'm just retired and getting my shop started.

@FearsomeWarrior 5 лет назад

Great video and project. I personally have less room to move tools around. The small planer stand is what I plan on making. Mine is on a metal stand that used to be for a radial arm saw and with no wheels is a pain. I already built a cart for my DW735 planer and it has a large compartment underneath for chips and a turned pipe with gutter screen into a small compartment for fine dust. I put rails to slip in a cheap $2 air filter into the small fine compartment's door. Both compartments have removable bins made from 1/2 plywood to hold the chips and dust. I found designs for this on Jumberjocks and adapted it for me. Hoping I upgrade my jointer but the cart and one wall for machines with dust collection is my goal.