"Yes, it must be that you changed a new controller. There is a long blue or brown wire on the controller. You have to cut it off" see the response below
Usually the factory settings will not appear speed limit. But pay attention to the speed limit on the controller. JOYOR scooters, except Y8S, will install a speed limit wire on the controller. To release the speed limit, you must disconnect it
@@pepedeemus69 There is a bunch of cables from the battery compartment to the handlebar. On this bundle of cables (near the battery compartment) you'll see two tiny wire ends. It is disconnected. Many people thought that the two tiny cables were disconnected due to a shipping failure. In fact, this is the speed limit cable. When the cable is disconnected, the speed limit is lifted. If you accidentally connect these two cables together, your scooter will be speed limited. If you don't find these two cables, then you need to open the controller compartment to find it. That's assuming you've replaced the controller with a new one or connected the two cables together yourself. If you never changed the controller or touched those two cables, then your speed limit has nothing to do with the controller speed limit cable. Then you need to consider the display settings. The display settings are consistent with the method in this video
I also want to know if we can reduce the speed after increasing it! Do you have the answer please? If yes, can you please answer me :,)? Thank you very much :,)
@@ytmythirst2217 Thank youuu ^^ I have one last question to ask you if you don't mind please :,). I tried to increase the speed of my scooter like in the video but my P15 mode is already on 100 and the maximum speed is only 25 😭😭. So I can't increase the speed like on the video 😭😭 ! Can you help me please 😭😭 ?
@@Tucco_ No, the Y8S is a scooter model custom-made for German road regulations. The speed does not exceed 21km/h. If you want to increase the speed, you can only replace the display and controller.
Unfortunately I changed the parameters P 15 to 100, but the speed is always limited to 25 km/h. Perhaps there is a speed limiter? Is there a way to remove it?