Jumper T16 Radio: Model setup tips

Подписаться 174 тыс.

Просмотров 63 тыс.

50% 1

Original T16 video: • Jumper T16: A lot of r...
OpenTX playlist: • OpenTX & EdgeTX Mixing...
Helicopter setup video: • OpenTX Mix School: Swa...
You can see more R/C related videos on the channel - / painless360
Looking for a video on a specific topic? All of my videos are arranged into easy to use playlists and have lots of text tags on them too for easy searching.
If this video was helpful or you liked the content then please consider subscribing and supporting the channel by visiting / painless360
Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit.
You can follow me on social media too. Look for the 'Painless360' name - / painless360 and Instagram as well.
Thanks for watching, please LIKE and SUBSCRIBE and Happy Flying!

Опубликовано:

11 май 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 249

@stevenshook5676 4 года назад

Lee, just purchased and received my new Jumper T16 Pro (the one with the Hall effect gimbals) and been reading and watching everything I can find on the radio JumperTX and OpenTX. Steep learning curve but I have finally yesterday found the courage to bind the Jumper to my TinyHawkk (was a RTF model with the controller). Took a minute or twelve to figure everything out but made it. Just wanted to thank you for the all your videos on the Jumper T16 because they were invaluable to me in getting started. I hope you continue to use the radio now and again as well as continue to make top notch videos on the radio too. Thanks again!

@toddspeck9415 4 года назад

So stoked I got the Jumper T16 pro Hall. Sure have been learning a bunch about it. Thanks for making this helpful video.

@tonydean2455 4 года назад

too bad it doesn't work... V1.2.1.85 internal RF module is corrupted

@toddspeck9415 4 года назад

@@tonydean2455 My internal module works great. Wonder why yours is not working? Did you connect it up to a computer. I have not done that with mine. Still kind of figuring out all the adjustments and settings on mine. But overall I really like it. Reach out to these amazing you tubers. Bet someone might know something to try. Hope you get it working.

@MadRC 4 года назад

Fantastic overview as always. I have one coming and was interested in seeing how different it looked to the X9D on the mono screen.

@NeilHodgsonDARKHOURS 4 года назад

Thanks again for great videos on the T16 I just having problems with setting up a variometer sensor and D8R-II plus and getting it working on the T16. I did bind to the radio but now not sure what the next steps are from here Thank You. I just got back to Ont. Canada from being over for 3 weeks in England and just loved it over there.

@r.u.kidding8696 4 года назад

Your commentary is outstanding, thank you.

@j.q.higgins2245 5 лет назад

Thank you for sharing - this is extremely helpful!

@81olsen 3 года назад

FINALLY! Thank you very much, very helpful.. I was having a hard time trying to find how to set up a wing... again thank you for this video..

@Painless360 3 года назад

Glad you found the video. I'm getting you are not a regular viewer. Lots of INAV builds on the channel.. Best of luck

@markx4452 4 года назад

perfect, now it's open tx 2.3.5 on the T16 but same way; GREATTT, thanks a lot

@MCsCreations 5 лет назад

Fantastic, Lee! 😊 It's a bit different from the X9D, but not so much. 😊

@raptorpome2577 4 года назад

thank you very much spot on just what i was looking for a few little bits are out of date now but it helped me a lot i have only just purchased the t16 pro & now i have found out the t16 s will be coming out with built in charging bugger.

@Painless360 4 года назад

I don't like the way they keep releasing updated versions...

@raptorpome2577 4 года назад

@@Painless360 well that is the modern world we live in.... He says after only just moving from 35Mhz TX to the 2.4Ghz jumper t16 Pro. can I use any of my old Tx's with my t16 to learn other people to fly buddy box or do I have to buy another t16 and do I need a cable or can I link them via WiFi

@blackmennewstyle 5 лет назад

Welcome to "JumperTX" LMAO! I really like this Jumper T16 radio just because it looks like the Futaba T16SZ which is such a beautiful ergomic radio! I'm almost ready to buy one but they don't have my favorite gimbal which is the M9R :/ Maybe they could consider to clone them as well in the future lol Have a great week and keep on flying :)

@interman7715 4 года назад

ABMNS PRODUCTION Actually 18mz styling .

@fpvforever1790 4 года назад

your videos really help me get started... i wish the manufacturer would use only DEAD CAT style frames for NO PROPS in the camera FOV. thanks

@helir00 5 лет назад

really helpful vid chapper

@planksimonproduktion9399 4 года назад

Very very helpful thank you very much!

@brokepilot6969 5 лет назад

Hi. Thanks for the info here. Helped me set up my T16 and it's ready to go for me to have a fly. However, I have a quick question. How do you switch between telemetry screens? I've set up 2 different telemetry screens. Screen 1 is for INAV telemetry and screen 2 is normal data. However, I can't seem to figure out how to switch between those 2 screens. Thanks.

@madforit9661 4 года назад

After following your guides. I cant get the reciever tab in Betaflight to respond after I have bound it. Can you do a video showing this ,Not on a servo but on the quad Thanks

@djdubz 4 года назад

great video....can the t16 bind to frsky, flysky, spectrum out of the box? or do you need to buy a external module for it? if so, what does the t16 bind to with it's internal tx?

@neilgillies6943 5 лет назад

Good and useful video Lee, maybe you can answer why there's no 'crosstrims' function available? It's on opentx taranis etc but not on my T16.

@emilgabl9069 5 лет назад

Hi, I love your videos. How do I set up a fixed wing aircraft when binding my Flysky t6 receiver? Does “multi” mean multi rotor? I’m just having trouble setting up my ZOHD Orbit.

@luissantos2748 4 года назад

Good job Lee, can you tell me how to define a key to Throttle Cut? Thanks

@Nelsonv2 4 года назад

Alert !!! I just got the Jumper T16 Pro. To work with dsm2 and dsmx receivers BOTH internal RF and externa RFl have to be ON in the model setup menu. After hours trying to make it work with the internal RF only and no response I try both on and wala!! works.

@kkuenzel56 5 лет назад

Thank you for the video! Being new to OpenTX I learned a few things. Hope you make more videos on this. BTW, what does "Weight" mean in the settings?

@Painless360 5 лет назад

Weight is how much of the signal/control is passed on. If you are new to Opentx then check out the 'Introduction to Taranis' and the 'OpenTX Mix School' playlists.. They may help..

@termitehards 5 лет назад

masha Allah ...a very helpful video, I am contemplating this radio, insha Allah planning to use it with DragonLink, hoping you will cover that soon insha Allah, thank you

@Painless360 5 лет назад

If you want long range then, for me, it's Crossfire.. Dragonlink isn't something I have here.. Best of luck!

@termitehards 4 года назад

Painless360 thank you brother 😉

@mike_oe 3 года назад

Nice video. And useful, if the buttons actually work. My model select button (wheel long press) just stopped opening the model selection menu. Most likely ribbon cable issue, but at an annoying time, as Im travelling with my radio, and cant get it to work with the plane I carried along :(

@makmefast 4 года назад

i need help lol. i bought the jumper t16 pro and a eflite havoc with as3x and safe mode. i cannot get the channels to work properely

@dingdongk03 5 лет назад

just wonder will it work with graupner gr-18c ?

@fernando.julio2306 4 года назад

hello Lee, help me I am not so expert in this stuff but if I do Understand I have receivers from Frsky then I can bind it with jumper 16 pro without module on the back off the transmitter ? or I am wrong ! I do need a module frsky ? thanks for your help

@sarfraz781 4 года назад

Hi thanku for guidance about t16 jumper pro is it captible with gusoline engine 50 cc or 100 cc

@Painless360 4 года назад

I can't see why not. Always do a range test in the area you intend to fly in.. Best of luck!

@scrc511 4 года назад

Hi, would you be kind enough to make a tutorial on how this come to play as far as setting up the mixers/inputs? Multpx: The Multpx setting defines how the current mixer line interacts with the others above it on the same channel. “Add” will simply add its output to them, “Multipl” will multiply the result of the lines above it, and “Replace” will replace anything that was done before it with its output. The combinations of these operations allow creating complex mathematical operations.

@paulriggs3437 4 года назад

Thanks for sharing..... I have a bunch of old Walkera quads and micro heli's.....have you any tips on setting up a Walkera Devo model for a heli ? in particular Genius CP v2....thanks a million

@Painless360 4 года назад

See my video on Opentx swash mix setup.. It should help... Happy flying

@paulmason114 4 года назад

Great report I just bought the lastest jumper t16 don't know if it was a good idea for first radio can you addvise me on the best receiver for t16? I have 2 iA6B can I bind them to the jumper?

@Painless360 4 года назад

OpenTX is a very powerful system but can be overwhelming for the new pilot. I'd recommend watching my OpenTX mix school for the basics. I've not tried those receivers here myself but the supplied 4-in-1 module has a ton of options, one of which will probably work with those. Best of luck!

@jeffeaston2183 4 года назад

Thanks Lee, your videos are great. I recall seeing one video where you described wireless buddy box connection with the T16. I cannot find that video and was hoping you could direct me to that video. I have a T16 with both internal and external 4:1 RF modules and would like to set up wireless buddy box control.

@Painless360 4 года назад

Have you tried googling 'wireless trainer painless360'? That should find it..

@stevemann6082 5 лет назад

nice screen on the T16 whats it like in the sun for glare ?

@paulmason114 4 года назад

Little help can I bind FS IA 10B Receiver To the jumper t 16

@spyder000069 4 года назад

Does any know if you can display the transmitter battery voltage on the screen instead of just the icon?

@spyder000069 4 года назад

I figured it out. Hold down telemetry and setup a widget. Choose VALUE for the widget type and change the source to BATT.

@COZ-1973 4 года назад

Hi..great info..i just bought the pro version..is it possible to set up Helicopters as this is what i use/fly most of the time..? thanks.

@COZ-1973 4 года назад

Just seen you have a heli setup ..thanks..

@TNFDRWS 4 года назад

I was wondering if you know how too or if its possible to set-up a lemon type reciever on this radio with a gyro and safe mode, I have been buying the admiral recievers from motion RC and have not been able to figure out how to set up they gyro and stability mode? any help would be greatly appreciated. obviously this is for fixed wing models.

@Painless360 4 года назад

Possibly, I don't have one to try. Happy flying!

@peterlehmannl5972 4 года назад

I’m all but convinced to update to the jumper from my old aurora9. The only sticking point is if it will bind with my hitec optima receivers. I’ve done some searching and am getting conflicting info. So as you have actuall hands on experience with the radio,probably not hitec?,you may be able to give some informed advice.

@Geoffh777 4 года назад

Yes, in your model setup, just set the internal RF module to MULTI then Hitec then choose Optima or Minima. I've just done this on my new T16 Pro. It'll be sad to pension off my Aurora 9...

@pankajjaiswal6498 5 лет назад

Lovely !

@StunnyFPV 4 года назад

Setting this radio up for a friend... using flysky (I may end up swapping the rx for a FrSky if i can't figure this out). Trying to bind the flysky fs a8s... the Rx does go into bind mode, but it wont bind to the radio. Using external RF Multi FS2A_RX (People had success using this instead of the flysky setting, but i went ahead and tried all flysky modes too). any ideas?

@Painless360 4 года назад

All I'd try is stuff you've already done. If you get it working please let me know..

@diablo3D 5 лет назад

Hi, please, give me an advice. is the jumper t16 reliable for controlling the f5j models according to your tests? perhaps using the Frsky xjt transmit module? thank you for answering Boban

@Painless360 5 лет назад

It all depends on the receiver that you are using. If you are using a 'real' Frsky XJT module in the bay then I dont see why not. Best of luck

@dayatgendut1645 3 года назад

Great. do you have problem with switch SA,SB,SC,SD normali in 3 position. But in actual my TX only 2 position.. in hardware setting in 3position..Thanks.

@Painless360 3 года назад

Not sure, what are the setting for the switches in the radio menu? What have you already checked/tried?

@FPV347 4 года назад

Hey I had a question, I have a bugs 3 mini and a jumper t16 pro. The original transmitter of the bugs has an acro mode, it is now connected to the t16 pro and I don't know how to get it in acro. can you explain this to me please. thank you in advance

@Painless360 4 года назад

I've no idea, it's probably another channel that needs setting up. Channel 5 or 6 usually. Best of luck!

@rcrahul3657 4 года назад

Hello there! I got this transmitter already, and quite happy about the overall feeling. One question though.. How to bind this Jumper T16 to the Radiolink R9DS kind of receivers which uses DSSS and FHSS protocols? I am somehow unable to bind those receivers in SFHSS option in "MULTI". Do I have to choose some other protocol for FHSS / DSSS?

@Painless360 4 года назад

I've not tried that here. If I get my hands on one of those receivers I'll give it a go..

@smashemquads6980 4 года назад

Can anyone help. With the T16 can u use the 6p numbered switches for models?

@Painless360 4 года назад

Yes you can. See my videos on 6 position switches.. Happy flying!

@Crazy_leggs 4 года назад

Lee, i purchased a T16 in june of 2019 and its worked great, the other day i went to go fly and my radio no longer responds to button input, it was working fine when i left the house. i changed out the scroll/button board but still not responding to button pushes... have you ran into this on your T16?

@Painless360 4 года назад

I've not run into that, please let me know how you get it working again... best of luck!

@joecarnes9174 5 лет назад

This this my first go at open tx, I've had spectrum and old school 72mhz jr quattro for 20+ yrs. Wow watt a learning curve, I'm having all kinds of trouble figuring this thing out. Thanks for a great video with lots of info. Guess I have a ways to go lol. Has anyone used this with spectrum bnf planes? I've been trying to with the 1.2m optterra bnf, I can get it to bind but that's it. Can't get it to arm the motor or anything else...

@Painless360 5 лет назад

Be careful as there are a few DSM options (11ms, 22ms, X, 2 etc.) so try them all until you find the one that works.. (make sure that prop is off! :D )

@darrenfisher5838 5 лет назад

Hi great vid do you no if you can copy models from xlite to jumper t16 in companion Regards

@Painless360 5 лет назад

Yes. Use the X10 setting as shown..

4 года назад

Please can you make a video of how to get it to work with the inductrix boards. The original inductrix FPV... little yellow one? No one seems to have any information on that.

@Painless360 4 года назад

Sorry, I don't have that model here so that would be tricky, best of luck with it..

@NeilHodgsonDARKHOURS 4 года назад

Hello Lee! great video I have a question how do I get the Jumper T16 logo boot screen. right now I have a stupid picture as my radio is turning on. Thanks in advance

@Painless360 4 года назад

Mine came like that...

@brownie6451 4 года назад

When I put the 4 in 1 module in my Qx7s it wont support telemetry, or fail safe. Was really considering one of these, however if this radio doesn't support these it wont work for me. I guess what I'm asking does it support telemetry, and fail safe for the FrSky recievers? Thanks for your consideration.

@Painless360 4 года назад

Please see the other videos in the series.. happy flying!

@lionbandit400v 5 лет назад

Great video thankyou! Question, is it hard to change from mode 2 to mode one?

@Painless360 5 лет назад

Not sure, I've not tried. There is a setting in the OpenTX menu and the access to the gimbals isn't too tricky. I'll bet another content creator has already done this.. Best of luck with it..

@lionbandit400v 5 лет назад

@@Painless360 thanks Lee.. I'll do it when my radio arrives next week and let you know how it went... cheers!

@The_Real_Zaineman 4 года назад

@@Painless360 Thanks for the Vid, I forgot how to make / copy a new model. So easy, just hold down roller. Hugely frustrating forgetting to hold down the roller. Zaine

@TheDigitalAura 5 лет назад

Mine has been on order for over a month now, still not shipped as it appears the factory can't keep up with demand.

@josephdavid8091 4 года назад

Did you get it eventually? I am considering buying one and am concerned if this issue is still present.

@johnnoble01 5 лет назад

I've lost the screen on mine because I changed the time out to 0. How can I reset to default as I have no way of seeing what the he'll I'm doing! Please any advice would be useful! Just found if I shine a torch on the screen is can see the setup screen . Was enough to read set the screen. Jumper should make it so you can't turn the screen off inadvertently!

@pankajjaiswal6498 5 лет назад

I too lost the display, recovered it by changing contrast values by connecting to my pc via a usb port.

@wilfredocampo4215 4 года назад

Hi Painless360, Hi Oscar, just wondering if these remote has Access protocol software installed already? I have the Pro version and it’s opentx 2.3.2. I used to have the Frsky X-Lite S access and the flashed all my receivers to Access, now I’m wondering if they work on this controller or is there any way to download the access protocol and install it into this unit?

@Painless360 4 года назад

I doubt it. I don't have the Pro here to check..

@wilfredocampo4215 4 года назад

Painless360, Thank you for your quick response. Another question, I am just wondering how to update my R9m module and some Frsky receivers from Jumper T-16?

@rcplanesjohnreap2777 4 года назад

On a wing model there is no need to reduce outputs to 50% .. that will just reduce the maximum throw on both elevator and ailerons to 50%.. use 100% for all... the combined result will be fine

@Fredhobby 4 года назад

hello mate, nice videos, very helpful, could you please help with how to setup opentx model for 3D Heli? thank you

@Painless360 4 года назад

This is something that I've already made a video or two about. Please see this video - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-P4soR6QgOk0.html - that should help you find those videos and help you find the answers you need quickly. Best of luck!

@scrc511 4 года назад

Hi there. I’m subscribed to your channel and I’m wondering if you have any video of the Jumper T16 setup for Helicopter. I have a Goblin 380 currently bound to my Futaba 14SG, it has a KBAR flybarless unit and I will be purchasing a SFHSS receiver for it so I can bind the T16. Thank you so much.

@Painless360 4 года назад

Hi there. I only have one video on how to setup OpenTX for a swash-mix but most modern helis have some kind of controller that handles that the old fly-bar used to do and more. If it has one of these installed then setup should be simple with you just matching the channel order it wants with no swash mixing needed on the radio.. Hope that helps..

@Painless360 4 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-u-NykZnjRM0.html shows how I setup a flybarless heli here in OpenTX..

@richardlong3615 5 лет назад

No sign of the FrSky T9 Lite yet?

@amhfpv Год назад

why jumper T16 can't run R9 2018and access 2019 i can't bind my Rx (R9Mini)to it . if you cane help please

@Painless360 Год назад

It is a function of the support in the multifunctional module, not the radio. I don't use R9 here so not sure I can help... Best of luck

@Crazy_leggs 5 лет назад

How do I change the endpoints on the t16 to go to 1000 at the bottom of the throw to 2000 on the upper side

@Painless360 5 лет назад

Please see the OpenTX mix school playlist on the channel and the simple plane setup video. You can change the travel of the channels in about 4 places.... Best of luck!

@smalltimer4370 4 года назад

Why doesn't the T16 have a Heli option when selecting new model? Is there a way to add one?

@Painless360 4 года назад

The Heli part of the LUA script that is there to help create models wasn't very well developed. It's not something many do but I've made a video on how to setup swash mixing on the channel.. Best of luck!

@shalikaperera2395 2 года назад

This transmitter can use for big rc airbus ? (Please reply )

@Painless360 2 года назад

I prefer the RadioMaster version. See my Kit picks 2021 video.. Best of luck

@diablo3D 5 лет назад

will ask. is it possible to use the transmitter module Jeti duplex TG2EX in transmitter jumper T16?

@Painless360 5 лет назад

I've not tried it but the support for the JR bay appears to be pretty standard..

@diablo3D 5 лет назад

@@Painless360 thank you Hi, please, give me an advice. is the jumper t16 reliable for controlling the f5j models according to your tests? perhaps using the Frsky xjt transmit module? thank you for answering Boban

@adriancjones 4 года назад

Is there a way to do a factory reset? I added models from a Joshua utube vid and now it keeps doing emergency mode. I deleted all models on open TX and did the firmware update, but it’s still doing it.

@Painless360 4 года назад

I'd ask him if it was his file that broke it. I'm not aware of one. Best of luck..

@adriancjones 4 года назад

Painless360 once I removed all my models from the sd card it stopped do the emergency mode error.

@neilfpv 5 лет назад

My T16 is arriving next week. Looks like it doesn't come with a battery. Which battery should I buy? Thank you for the video.

@goode426 5 лет назад

May I ask where you ordered from? I had ordered 5 weeks ago and the company finally sent word to me that they were going to refund my $$ back. They told me that they would sell me a Sky something at a 20% discount and I had 2 weeks to let them know. So if you would please know where your radio cam from I would really appreciate. How long did you have to wait? I have purchased 2 planes but I have no radio Lol cheers!

@neilfpv 5 лет назад

@@goode426 I ordered it from pyrodrone.com/ Most likely the seller where you bought it from sells FrSky. There is an issue now between FrSky and Jumper. The Jumper T16 product is becoming famous and people are buying it. It's a newer product and people like it. I've seen in forums that FrSky is afraid of losing the business so their authorized resellers of FrSky are being asked to stop selling Jumper T16 product too.

@Richard-rs8tx 4 года назад

I find that I am able to bind several Quads, Syma, Hubsan etc HOWEVER, NOTHING will ARM Any help appreciated. Basically - some "step" is missing?? I have viewed and tried several inputs from other video's etc. by no luck. So Far

@Painless360 4 года назад

Please see my 'quad building. For beginners' playlists or my Betaflight BNF video.. Best of luck!

@shozzy69 5 лет назад

Painless can you please show how to add images, software update and also a range check thank you so much cheers

@Painless360 5 лет назад

I'll add that to the list - stay tuned! :D

@drifter1949 5 лет назад

@@Painless360 I too need help with adding model images, I have tried adding some tricopter images without success

@lloydpedvis238 5 лет назад

Is there a reason why when setting up a new model, that there is only a glider and plane options, and not a quadcopter option

@Painless360 5 лет назад

Yes all covered in review video. OpenTX haven't bothered to make the rest of the wizard for their most expensive FrSky radios.

@aftabbangash4484 5 лет назад

Plese tel me function of servo reverse setting in jumper t16 plese and me fast

@Painless360 5 лет назад

Check out the OpenTX mix school for a full overview of all the elements of OpenTX and how they work. Servo reversing (sometimes called channel direction) changes the direction of the channel.. Hope that helps..

@Nelsonv2 4 года назад

Sorry correction : Alert !!! I just got the Jumper T16 Pro. To work with dsm2 and dsmx receivers BOTH internal RF and external RF have to be ON in the model setup menu. After hours trying to make it work with the internal RF only and no response I try both on and wala!! works

@endyX286 4 года назад

awesome radio.is the program same as opentx?

@Painless360 4 года назад

Almost, it'll be officially supported by OpenTX in the next version out very soon..

@diablo3D 5 лет назад

Hi. Please, what language does the Jumper T16 support? Does Czech Language Support? What is the Open Tx installed? Thank you

@Painless360 5 лет назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-c5yYpbOpXGc.html should help answer that..

@diablo3D 5 лет назад

@@Painless360 Thank you

@stewartdavis8618 4 года назад

Hi Great channel, have you heard of anyone having trouble binding Flysky Rx's as I've tried 3 of mine and none will ?? any help appreciated.

@Painless360 4 года назад

The ones I've tried here have worked OK but I don't have many to test all versions of the FlySky recievers..

@baxterlong5145 4 года назад

Try setting your rf mode to MULT FS 2A PWM/IBUS instead of flysky

@InLikeTech 4 года назад

Hi, I have a few basics. 1. @1:47, You should also have mentioned here that holding down the "Page" button will take you back a page (Page Up); 2. @4:19, if you select "No. I need to change something," how do you go back to change something?; 3. @4:31 How do you delete Model10? Model10's popup menu, the one you just made, do NOT have the "Delete model" option. Why is that?; 4. @12:09 how do you remove your settings from CH5 (for example) without deleting CH5 from the list? Thx.

@Painless360 4 года назад

Please see my OpenTX series where all of those things are covered. You can not delete the current active model memory. Happy flying!

@flyincrazzy 5 лет назад

Hi, I just received my T16 (versioin 2 with hall) i have tried to set up dual rates for one of my models but nothing i change on the input page seems to make a difference. I even tried to add expo to the standard set up and it was not reflected on the model even though there displayed graph replicates what the expo should look like. changing weight also doesnt make a difference. please help :(

@Painless360 5 лет назад

See my video on DR setup. Best of luck!

@flyincrazzy 5 лет назад

@@Painless360 followed every step. no luck. thanks anyway

@flyincrazzy 5 лет назад

@@Painless360 created a new model from fresh, problem has gone. now to try to solve the nil aileron response 🙄

@lahorehobby2954 5 лет назад

Plese sir tel me where is servo reverse function in jumper t16??

@Painless360 5 лет назад

In a number of places - channel direction in the output screen, the polarity of the weight of the channel in the mixer... See the OpenTX mix school on the channel for step by step guides and tutorials. Best of luck!

@Kuxxra 5 лет назад

Anyone here has issues with MDL (model) or SYS (system) buttons with T16. I love the radio very much. Right out of the box i cant add any models because MDL button does not work. Help please.

@gregmiller1494 5 лет назад

I have seen others with this problem and they had to open up the radio and re-plug in all the ribbon cables to solve this issue.

@btsc1 5 лет назад

Can you do a quick video on updating the firmware? Jumper just released a FW update 4/28/19 to fix the page issue and thumb scroll wheel.Can't seem to find any info on this, afraid to brick my new T16. Thanks

@Painless360 5 лет назад

Thanks for the idea, great suggestion for a video. Leave it with me..

@j.q.higgins2245 5 лет назад

@@Painless360 There is a very straightforward tutorial out there on another British YT channel. I don't know if you are happy with links to other YT content but can update if you agree. (And no, I am not affiliated with or otherwise beneficiary of that channel. :-))

@Painless360 5 лет назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-c5yYpbOpXGc.html :D

@TheM6aae 5 лет назад

How do you change the splash screen? Added a lua script & the original jumper to logo disappeared! Looked in the images dir but,not there!

@Painless360 5 лет назад

Did you flash the firmware on the radio? It's unusual that changing something as simple as a lua script would change the Startup image. That's normally something you select when you flash firmware?

@neilgillies6943 5 лет назад

Dump a file (of the correct proportions - the size escapes me at present) called 'splash.jpg' (or .png etc) into the 'IMAGES' folder, it'll pick it up on bootup.

@Painless360 5 лет назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-c5yYpbOpXGc.html :D

@Sam-gr8pl 5 лет назад

T16 is compatible with all receivers? Like spektrum?

@Painless360 5 лет назад

Via the mulriprorocol module, pretty much..

@leefalconbridge6674 5 лет назад

How do you get the TBS theme please? Fantastic videos thank you

@Painless360 5 лет назад

It was on there from the factory on mine..

@leefalconbridge6674 5 лет назад

@@Painless360 ok great thanks received mine yesterday has the crossfire lua but no theme. Never mind appreciate the reply

@ernie5229 5 лет назад

Does anyone know how to bind the Jumper 16 to either DSM2/x or FlySky? After hours of work, I can't figure it out. I'm new to OpenTX but have 20 years in the hobby.

@Painless360 5 лет назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oND7jcKHAwE.html covers it..

@emilgabl9069 5 лет назад

@@Painless360 Does the t16 have a bind button? What protocol is Flysky?

@vovsen123 5 лет назад

I'm trying to add pictures of my planes to T16 but I'm apparently not using the right format/name or? I have tried to look at the PNG's format that is in images but to no vain. the ones i paste to the folder don't show up to be selected in the models. could you made an answer in a future video? thanks in advance.

@Painless360 5 лет назад

Will do, thanks for the idea.

@vovsen123 5 лет назад

@@Painless360 figured it out myself. the filename must not be longer than 10 characters and no embedded blanks.

@gregmiller1494 5 лет назад

Can you copy a file from someone else, like from your radio and then copy it to my radio, so I don't have to do all the setup from scratch?

@Painless360 5 лет назад

Yes, with some work. See my videos on model memories and EEPROM management in OpenTX.. best of luck!

@richardwilabee5998 5 лет назад

Can you tell me how to change to a different switch on my flaps. It defaulted to a switch I'm not used to using for flaps.

@Painless360 5 лет назад

Check out my OpenTX videos as they cover that. You can edit the output in the mixer for the channel you want to change, highlight the switch currently in use and then move the one you want - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wzcilKe_1NE.html

@richardwilabee5998 5 лет назад

I figured it out

@Painless360 5 лет назад

So the video wasn't needed?

@charlesmcguire9711 4 года назад

More Jumper T16 setup, tips, and tricks videos like this please good Sir. Doubt that you need it, but have suggestions if it would help. Please and thank you. Cheers Mate.

@Painless360 4 года назад

I;m not planning any as this is basically a 'very close cousin' of the X10 ;) The settings and setup are the same..

@charlesmcguire9711 4 года назад

@@Painless360 thank you sir Makes sense

@charlesmcguire9711 4 года назад

So sorry to bother you again, but not everything from my taranis am or sound pack works on the t16 jumper. Specifically, shtreal doesnt work. Any idea why? Thanks mate.

@Artie6937 4 года назад

Would you happen to know if it could mode 3

@Painless360 4 года назад

Yep, all modes supported with some tinkering with the gimbals and OpenTX

@updownallaround 4 года назад

hello sir, my name is Luis Monreal ive been in the rc hobby for 30+ years, recently i bought the t16 plus, i want to learn more about open tx technology, i saw your vids on youtube, tried to update my firmware but now i get an sd card warning when i start the radio, any advice or links i could use, thanks in advance!!!

@Painless360 4 года назад

Happy to help but please watch ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-olIqTiSJHIY.html and come back to me with more detail of what you've tried..

@updownallaround 4 года назад

@@Painless360 will do thanks for your reply

@bennedictbyy 4 года назад

Does it work with Frsky-XM+( FCC )?

@Painless360 4 года назад

Yes

@bennedictbyy 4 года назад

@@Painless360 Cheers! Btw, any chance you will be reviewing the Flywoo Explorer LR HD 4'' 4S Micro Long Range? Seems like a pretty good quad for a reasonable price!

@short5stick 4 года назад

how do you see sdcard version file I dont see that

@Painless360 4 года назад

Long press menu button to access radio menu. See T16 and Opentx series..

@TheDigitalAura 5 лет назад

Well my radio finally came and I'm having a terrible time trying to assign fresh images, I think it's the right size and in the right folder but doesn't show when I go to apply to my model, it does however show when I load the system menu and view the contents of the SD card. Any Idea what I could be doing wrong?

@Painless360 5 лет назад

It took me a couple of tries to figure it out so I will be making a video on it very shortly. Keep an eye on the T16 playlist. Best of luck

@TheDigitalAura 5 лет назад

Fantastic, thanks. This radio is great, but it's driving me crazy.

@Painless360 5 лет назад

Can you send me the file you're trying and I can fix that as part of the video?

@TheDigitalAura 5 лет назад

proxy.duckduckgo.com/iu/?u=http%3A%2F%2Fwww.robotcombat.com%2Fproducts%2Fimages%2FBLH8700_lg.jpg&f=1 The first model I made, figured an Inductrix would be a good start. Tried resizing it and still no good.

@Painless360 5 лет назад

Thanks for that - the image is huge but resizing it here works great. What have you tried to get it to display?

@paulpark4899 4 года назад

how long does the battery last?

@Painless360 4 года назад

I can easily get several days flying... happy flying!

@ScowlerJase 5 лет назад

Jumper T16 not shown as being compatible with OpenTX on their website ( OpenTX ) - also heard a few things about it being a clone of a certain Frsky radio with hacked firmware? Was about to buy one but will avoid now until the details are all known.

@Painless360 5 лет назад

It's not a clone and it's an officially licenced fork of Opentx - see my review..

@PcandTech 5 лет назад

Would you recommend the radio?

@Painless360 5 лет назад

I really like it but there are reports of the roller breaking if you're too rough..

@j.q.higgins2245 5 лет назад

@@Painless360 Definitely one of the weaker points of this (otherwise great) TX. I personally tend to click only on the lower end of the roller bar, where the actual switch is located; this helps reduce the overall amount of pressure required as well as the stress exercised on the potentiometer and the rather fragile joint pin at the upper end. EDIT: O.K. - Just read through the rest of the comments and found that the above - can be said with much less words :-) and - doesn't seem to work always and for everyone...

@BigWillieFPV 4 года назад

Hey guys I’m having issues with using the JumperT16 pro with the BnF umx sports cub the linked video is exactly what I have plane and tx the module binds but no control on AETR they just go crazy and the jumper keeps saying telemetry lost telemetry recovered over and over. Funny thing is I came from Futaba 14SG and I got a dx9 module made up years ago for the bnf stuff and it works perfectly with the umx sports cub. Just when I thought I was out Futaba pulled me back in. Any ideas on what going on with the J Tx? thanks champs ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Jk-MavS7Dl8.html

@aerialcombat 5 лет назад

I can't arm the quad I've bound with this transmitter, can someone help?

@Painless360 5 лет назад

What troubleshooting have you already tried?

@aerialcombat 5 лет назад

@@Painless360 well I've bound it after switching USB cables now I can't arm it. Something about assigning another switch or something, this is for the tinyhawk s

@Painless360 5 лет назад

Please see my review of the Tinyhawk and my video on setting up Betaflight for BNF models - they should get you sorted. Best of luck!

@aerialcombat 5 лет назад

@@Painless360 I got it, but I'll watch you videos anyways

@emilgabl9069 4 года назад

Does anybody know how to change from mode 1 to mode 2 in the settings?

@Painless360 4 года назад

Radio setup menu. First page I think. See my videos on changing modes...

@emilgabl9069 4 года назад

Painless360 thanx I found it...I issue I’m really having is the keys are stuck. My page button does not work. Everything is kind of screwed up on radio. I can’t get to inputs or mixer pages.

@Painless360 4 года назад

They might not be stuck - there is a common issue with this radio where the ribbon cable comes loose..

@emilgabl9069 4 года назад

Painless360 I’ve taken ribbon out and put back in etc...still doesn’t work.

@Painless360 4 года назад

Bum, I hope you get it sorted. These kinds of annoying issues are why I stopped making videos on it or talking about how great these radios were here on RU-vid.. Many other channels still do in fact..

@emilgabl9069 5 лет назад

How can I update firmware?

@Painless360 5 лет назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-c5yYpbOpXGc.html :D