I'm really grateful! I have the TX16S and I had to spent many days trying many methods! Tried installing SMT32 drivers and the famous VPC, also tried with ImpulseRC_Driver_Fixer and Zadig, but nothing worked! So, I was tired ans stressed so much, just as the first time that I tried to install an uncompatible modem driver in a Mandrake Linux distribution hahaha. But then I saw the video title and thought that maybe it could work, even though it was a Jumper T6, so I gave it a try as my last resort, I watched it and thought "it's toooo simple! that won't work on this model (I''ve tried to do something similar but instead of an input device I used a COM PORT and didn't work)", but surprise! It worked!!! THANK YOU!!!!!
Omg thank u so much for this video finally u came to teach us thank u very much. That's so cool I knew I can do the simulator but did not how now I know .
You are a freaking champ, thx a lot channelholder.. My T16S lives another day thx to you.. could not understand why it worked fine yeaterday first day with DRL and today it would not find my TX Radiomaster, but i seems my Book had made some updates, and that had reset that USB driver.. thx a lot.. your wife can give you a big kiss on the cheek and say its from me..you earn it.
I'm struggling to find the USB input driver. It doesn't show up in a list of drivers that I have. Suggestions? Also, my jumper shows up as two USB devices...
Hello i have t12+ i made usb mode ask and i made a model that i turned of ext rf and int rf but when i plug my transmitter to pc it show up error that says your usb faulty thats why windows couldnt recognized usb .(i tried with another cable but the same thing happened again can uhelp me about it thanks)
Hello! Nice video! I am having one problem when i connect to pc with usb joystick i can hear it being recognized but i don't see a icon in my computer file so i can do the rest of the setup. Any solution's ?
At the end of the video, your stick movement is not being reflected correctly by the on screen sticks. When you for example drop throttle to zero, the throttle stick on screen never drops below centre stick. To get it to work correctly, you have to drop the weighting of each channel to 50% and add an offset of 50%. I had to do this to get full stick movement in some sims like liftoff and Next-sim. Happy simming:-)
Hah.. I didn't think to create a sim model with internal and external module turned off. Crossfire drain your battery really bad. I just turned it off manually. Good idea having a sim model 👍
If your transmitter is mode 1. Throttle on the right-hand side... yes you can. Otherwise it'll will require pulling your controller apart. RETA is the setting you want. On your controller or betaflight. I have velocidrone for my sim. You can go into controller setup and it will ask you for each individual axis. Basically it'll just ask you which one do you want to be throttle? And you just move the stick. Then it'll ask which one do you want to be yaw and you just move your stick etc . Hope this helps. 😉 I just noticed your comment was a month old you probably already have this sorted. 😂 have fun
I recently bought the taranis qx7s because I couldn't get a answer. Now that you tell me I will give my friend my taranis and by the jumper t16 since you replied. I'm still gonna say thank you because I could find this information you gave me anywhere. Thank you for your time and keep on flying!!!!😁
When I connect my tx and go to controller my throttle axis stays in the middle. When I start a game the drone flies straight up then crashes. Non of my inputs work. What am I doing wrong. MacBook Pro
Hey how are u ok I did everything u did but there is something wrong with the sticks its like going on mode 1. Don't know why but I'll try everything again to see if I can fix it thank u.
@@builtfromhome9207 yes thank u I'm going to change it well I'm going to watch one of ur videos where u did that I got to find it thank u so much men u really have a lots of knowledge on this matter so I'll follow u it's my first time dealing with this type of radios or any kind of transmitter I have the Radiolink T10 but trying to upgrade the firmware it did stop working lol I know t can be fix but that's going to be for another time now I want to deal with the jumper . Thank u.
Ok have a question I did upgrade my radio with the USB-C and now I'm not getting my computer to recognize the radio when I choose to joy stick right after that nothing happens can anyone give me a hint thank u guys and Build from home.
Yea I'm sorry about that. I did not know that youtube normalized my audio when uploaded. I have fixed that in my most recent video and I wont have that problem with any future video.
