JumperT16 Top Questions Answered | Jumper T16 Pro Bootloader - Does Mine Have it?

Подписаться 26 тыс.

Просмотров 10 тыс.

50% 1

Does your Jumper T16 Have Bootloader? We show you at the end of the video how to determine. Where to look for the all the receivers the JumperT16 multi module will work with and how to charge your JumperT16 Pro using the 18650.
13:51 starts the technical bootloader check - its not the full tutorial, but at least what to expect
GitHub for Jumper
github.com/pascallanger/DIY-M...
All current receivers JumperT16 Protocall
github.com/pascallanger/DIY-M...
Filmed Dec 2019
If you like this video, be sure to give us a Thumbs up!
Please support our shop any purchase even a pack of props helps us out.
Shop Jumper Products Here at Grayson Hobby
graysonhobby.com/jumper
1) SUBSCRIBE to learn how to update your hobby gear and hear the latest reviews on products we carry - Remember we do not carry the junk - it must pass our confidence test!
-- goo.gl/RhTL1H
2) Drones We Tested and APPROVE
-- graysonhobby.com/multicopters...
-- graysonhobby.com/multicopters...
--graysonhobby.com/multicopters...
3) New to Drones? Check at our suggested quads for all skill levels
-- graysonhobby.com/drone-purchas...
4) LET'S CONNECT
-- / graysonhobby
-- / 77768. .
-- / graysonhobby
7) Come Visit our Brick and Mortar FPV & Hobby Shop - Touch and Feel before you purchase!
GraysonHobby
220 Old Loganville Road
Loganville, GA 30052 - USA
Tel (678-682-9123)
#jumperxyz #opentx #radiocontrol #bootloader

Наука

Опубликовано:

7 янв 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 62

@garyreinke5161 4 года назад

Why is this hobby so difficult to setup a quad? Binding, protocols, software configs, modes, etc, etc. i have spent countless hours researching, watching RU-vid videos. I spend more time in the setups than flying. These guys rock!

@BigDFPV 4 года назад

Basil saved me with my T16 Pro. The scroll wheel was messing up really bad, he told me to spin the ribbon cable around on the scroll wheel board inside the radio, well I did it and it works as good as new now. Thank you very much Basil for the excellent over the phone tech support. So if that happens to anybody else, just do what he said and you should be good to go. Took less than 5 minutes to fix.

@thegrafxguy1 4 года назад

you guys rock, thanks for all the info on this radio, it's helped a ton!

@graysonhobby 4 года назад

wow, thank you for the kind words!

@RickMaddoxSr 4 года назад

Thanks for the video guys. Just got my T16 from you and love it.

@graysonhobby 4 года назад

Awesome! Thanks for the support!

@karldunn1464 4 года назад

Thanks for the great info Mine will be here this friday

@graysonhobby 4 года назад

Hopefully coming from GraysonHobby !

@shozabidelou9492 4 года назад

Thank you! Your video saved me!

@ray4lsd 4 года назад

Thanks for this vid, super helpfull

@graysonhobby 4 года назад

Glad we can help and thanks for watching!

@h2o-fpv623 4 года назад

Guys thank u for the video. I made a mistake when I was updating my radio and I downloaded the wrong thing now if I download in another card the right firmware on the card I should be able to continue? Thank u for all the work u guys are doing for the community.

@frank17021967 4 года назад

Very Thanks !

@KelleyCycle 4 года назад

Thanks fellas, I'm a brand new T-16 owner (version 1 red logo) and your videos are very helpful. I've just completed the update to OpenTX but there's one thing I can't figure out though.... I program my models as AETR but channel 1 on any RX I use (Flysky or Frsky) is controlled by the rudder stick NOT the aileron like I want. Why is that? What am I missing??

@rogergravel6638 4 года назад

Thanks great information i have a tattu 2500mah2s lipo in my jumper t 16 it fitted perfectly

@graysonhobby 4 года назад

Wow, great to know, did you have to modify the connector?

@rogergravel6638 4 года назад

@@graysonhobby No I use the balance plug it's the pack for fat shark google (with the led on the side to check the batt voltage)

@rogergravel6638 4 года назад

fpvqe.com/lipo/3010240-tattu-2500mah-2s1p-fatshark-goggles-lipo-battery-pack-with-dc35mm-plug.html

@graysonhobby 4 года назад

@@rogergravel6638 Oh that one! We have a better one on the way! :)

@alonzoellis6686 4 года назад

You guys are great. Love your input to Jumper t16. It's a great radio with greater potential, such as a one shot FPV sys in that the screen is large enough to become the radio screen as well as the FPV screen that would be great. When I do order one it will be from you guys, because you do all the up grades before you ship the radio. or do you guys offer the upgrades.? Will you put Open TX on the radio as a paid service. I would want the radio to come with the best upgrades with Open TX.

@jebrc 4 года назад

So the module you sell now has the bootloader? I have the regular version I put the hall gimbles and the internal module but still need the bootloader

@michaeljohnson6473 4 года назад

My Jumper came with open tx 2.3.2. My Spektrum receivers have a bug.. Even with extended end points turned on, I don’t get full travel in all channels.. I could only get it to give me %90 travel.. Is there anything I can try to fix it? Should I try to update it??

@shenanigan3083 4 года назад

Has the sight been improved It seems like it 👍🤞

@bobsterit2463 4 года назад

Does the new OpenTx Companion allow you to made a backup of your radio?

@Erskines 4 года назад

This was a very nice! Now my radio and module is up to date. But i still not get any rssi warning from my radio like Frsky Qx7 from xm+ in my drones. When plug/unplug battery from drones Frsky radio tells me "rssi lost/rssi recoverd" But my Jumper T16 pro dont. All audio files are ok on memorycard. Thanks for a nice guide.

@ajosepi1976 4 года назад

I 3D printed a battery cover that I modified from the 3D file on the Jumper XYZ website. I made a Y plug wire for charging externally. It works well. The best part about this TX is it is easy to modify. I would never do any of this with my DX9.

@matthew04101 4 года назад

can i adjust the signal power output ?

@vonSchwartzwolfe 4 года назад

How well does this radio run basic DSMX and DSM2 receivers? I've got a large hanger all outfitted with them and in the market for more channels. the cost of the spectrum radios is just gone over the top for me.

@DavidReynolds-kr6yh 4 года назад

Ron DuBray , in the video they mentioned that some of the earlier versions had a problem with spektrum recievers, so by that I’m thinking that it shouldn’t be a problem with the newer version radios. I’ve got one myself and Ive now got the tbs crossfire unit in it, and I can change between those two and with the crossfire I can get some incredible distances. But even with the spektrum radio quads I’ve got, I’ve had no problems.

@ttdriver7827 4 года назад

Hello my t16 dont schow the internal HF module on the menue anymore do you know why this happend, i dont change anything on the Radio. After this i have Flash the Firmware to the latest version but nothing changes. The Radio is delivered in january also almost brand new . I hope you can help me. Gretings from Germany

@johnmcdonald5008 2 года назад

Hi! I have a bootloader i have bricked it really bad I followed JB 3 ways how to un brick it but to no aveal so maybe I would understand your instructions so if you can help plz do thanks?

@gbro8822 4 года назад

Thank you

@graysonhobby 4 года назад

Absolutely! Thanks for watching!

@stewartdavis8618 4 года назад

Hi guys I'm know i'm being thick but which is the link to show me how to install the bootloader to my internal module ??

@brokenfpv4601 4 года назад

Are you guys getting them in stock today?

@abghere 4 года назад

There is a black and a silver version? Are they the same apart from the color? Don't see the selection on your web site?

@graysonhobby 4 года назад

The Black on has the 'Custom' Carbon Frame installed - all parts here graysonhobby.com/jumper-t16-pro.html

@gsreinke 4 года назад

Jumper T16 can be updated with Companion via USB with PC

@chjky60 4 года назад

I need a motherboard for my jumper t16 pro, any help finding one?

@graysonhobby 4 года назад

absolutely, send us an email or join our FB Group and we can get you anything you need from Jumper.

@chjky60 4 года назад

@@graysonhobby email sent..Thanks.

@emilgabl9069 4 года назад

Yes

@kellygrajek 4 года назад

I think Basil might be ummmm taking rides to FL to get his supplies for charging his "batteries"

@christesterman5004 4 года назад

Sorry for this post Wil and Basil. But I'm getting pissed all of your past videos(15) have been on this damn radio. Don't you guys have any quads to review???

@Mikeylikesit1968 4 года назад

F Quads , they ruined the hobby

@graysonhobby 4 года назад

Quad companies do not like the truth when we converse with them about issues we find. They just like the "THIS IS THE BEST QUAD EVER" reviews which we do not do and therefore we no longer receive many new quads for reviews.

@graysonhobby 4 года назад

@@Mikeylikesit1968 reckless pilots ruined the hobby -Basil

@christesterman5004 4 года назад

Thanks for opening my eyes, Basil!!!

@williewoolery4722 4 года назад

Sorry I might have let a couple sailor words out. I apologise. It's how I talk but not!Ally not how I would write.

@emilgabl9069 4 года назад

Grayson videos are ok but they move to fast and are not good at explaining how things work...Shumi UAV...has a better channel where he explains how to set up expo, throttle shut off etc...

@DavidReynolds-kr6yh 4 года назад

emil gabl , no Joshua bardwell.

@emilgabl9069 4 года назад

David Reynolds yes...I forgot he is excellent. That is where I learned most everything! 👍🏽

@graysonhobby 4 года назад

This video was not a tutorial! But thanks for watching!

@emilgabl9069 4 года назад

Grayson Hobby I know it wasn’t...I was talking about your other tutorials. Guy with beard talks too fast. When I try to listen I have to keep rewinding to hear and see what u r doing in your tutorial videos.