Jura C-E-F-Z Impressa Bean Grinder Rebuild, Repair, Clean, Replace Burrs 

awesome video, thank you! I took it apart to clean it but didn't know how the ball bearings and springs all lined up - I was about to give up and get a new one but thanks to this, mine is back in action!

Thanks for the thorough video on rebuilding my grinder and GO NAVY!

Thank you very much even after 2 years still very helpful❤

the ball bearing thing was excellent....saved my machine :)

Отличное виде, смонтировано профессионально, все довольно ясно и точно показано без лишних слов. Есть мелкие детали, которые показаны на этом информационном видеоролике по сравнению с другими знатоками разборок кофемашин этого типа ни в одном нету того, что указано здесь. За это Вам огромное Спасибо и сотни миллионов подписчиков на Ваш канал. 🏆🏅💎🥇👏

Thank you for the help. 😉

Great video.

Thanks for the video. I have a Jura Impressa J6 with a grinder like the one in your video. It wasn't working...no beans going into the grinder, so I replaced the grinder burrs. This didn't resolve the problem. Similar to someone else who left a comment here, I'm getting a "Fill Beans" error message even when there are plenty of beans in the hopper. I cleaned the sensors so they shouldn't be blocked (looks like there are two sensors that shoot a beam across the hopper to check for beans). I didn't need to replace the burrs after all, it's something else. I've taken the grinder apart a few times now to see what I missed and can't find anything wrong, but it's not feeding beans through and I'm getting the "Fill Beans" message on the screen. Sounds like this might be a semi-common issue. Any ideas?

I bought my ENA 8 brand new and took the grinder apart to clean it. Interestingly it didn’t come with the 3 springs and bearings. 😅

Hello great video. What do you do when you took it apart, and discover there are no markings?

Really detailed video. Thank you. I got Jura Impressa Xs90. You think this works with that model? Somebody poured water into the grinder, you think doing this would repair it?

Hi! Thanks for the video! I recently got a non functional unit and upon disassembling the grinder I found out that the little springs and bearings are missing could you tell me how important these are for the grinder to function? Thanks.

This is a nice tutorial. However I did not find how to replace the motor. It`s tricky to find how to take apart this motor and gearbox. Can you advise how to do this, please?

Great video! I replaced my grinder with a new one. Unfortunately the grinder doesn't activate. I get a message saying not enough coffee. Why would the grinder not activate? The bean container is full. Are there ways to test the individual components?

I have the Jura Impressa S9 One-Touch purchased from Costco 8 years ago. Stopped grinding and message said fill bean hopper, it was full. Cleaned and refilled, same thing. Any advice?

Great video! I completed the replacement, but now my Jura doesn't prompt me to "Empty Grounds". The bin just fills with pucks and never prompts me to empty them. Is something in the wrong position after my burr replacement? How does Jura know when grounds need to be emptied? Number of coffee drinks dispensed? Need a Pro Tip? Thanks in advance.

is it possible to replace only the motor? looking at an ENA9 micro where the grinder doesn't run and "fill beans" message appears. Hoping the chute is clogged, but if not then hoping i can rebuild with new motor instead of spending $400 on new grinder assembly

I accidently got water in my grinder and so obviously I need to take it apart and clean it out. What is the blue dot for on one of the holes in the inner white ring? Is this marking something?

Can the machine run without the small bearing seen at 10:45? My bearing got lost and I ordered new ones, but it'll take a week to get them. Should I assemble the grinder without it and redo when I get the new ones or just wait?

Hello. Great video very informative. I need help, I just bought a used Krups orchestro with a very bad noise for a few pesos here in Mexico. I was able to fix the noise, just was the brew motor and the machine works again. Of course, I did a deep cleaning in the brew group and in the grinder (you don’t believe what I found there). Anyway, the machine works great, but the grinder is not delivering enough coffee and not fine enough, the puck is bridle and wet when is deposited in the tray. I don’t make the mark in the grinder rings and I just adjust to 13 clicks to the left as I found in a forum somewhere. The resulting coffee is not strong enough (compared to an Nespresso machine for example) the grinder seems to be in a good shape and very sharp. What can I check? Please help! Thank you.

This is completely useless without showing us how to remove the grinder from the machine.