Kang Tao Nerf Blaster - Part 3 - Mag Sleeve, Flywheels & Pusher Rod 

я бы добавил к прицелу настоящую видеокамеру которая заменяла бы прицел, с тактическим фонариком и лазерным прицелом I would add to the scope a real video camera that would replace the scope, with a tactical flashlight and a laser sight

Hi, i used heatset threaded inserts for that 90% of parts, and some parts such as muzzle had tiny squares of double sided sticky tape

Thanks so much!

Also what printer did you use. I have access to a bunch of 3D printers but want to see which one would be best

@@ratas6431 I forgot to mention M3 machine screws for the heat set inserts, of various lengths. You would need a large printer for this project, 300x300mm bed. I used Artillery Sidewinder X1, though Creality CR10 is also popular. These days I use a slightly smaller Flashforge Guider 2S. Anything large enough that can print basic PLA should suffice. My latest projects only need 180x180x180mm or 150x150x150mmm size printers making things easier.

I used a 3s lipo because that gives roughly 12V for the 12V solenoids available. I bet you could run the 12V solenoid on the 4s battery, since it is short on off cycles. Just dont keep the solenoid energized continuously. And keep an eye on temps. Also mentioned in the guide iirc is to get stiffer solenoid spring.

Thanks mate

It is stationary, but removable for transport / storage