Showing how to quickly adjust the emergency brake on the Kawasaki Mule Pro FXT. This is accomplished with one simple tool - a 12mm socket or wrench. Thanks for watching! Comment, like, and subscribe for more quick tips!
Appreciate the video. One note, those are jam nuts on the base of the bolt you were turning. That’s why it was so hard for you to turn. Loosen the jam nut first and you can turn the bolt in with your fingers, then tighten the jam nut back. Same size, 12mm
I have the same problem with my 2016 diesel model, I’ve made this adjustment more times than I can remember now and it always walks itself back out… any suggestions as how to make it a permanent fix?
I don’t know that it could be made permanent. I’m guessing it’s a combination of brake pad wear and stretching of the cable but you’d think the cable would eventually settle in.
As stated in another post on this, you need to check the "JAM" nut on the adjustment bolt! Loosen the jam nut before adjusting, and tighten the jam nut after adjustment while holding the adjustment screw with another wrench while doing so. Shouldn't move after that!
