Kawasaki Nomad 1600 debaffle 

OK,did it. Watched this and other videos several times. Got a tapered dresses replacement leg at ACE. Unscrewed the stud and drove it into the pipe. Using a powerful 1/2" plug-in drill with two hand grip made a quick and clean cut. Whole job took

Just did my 08, followed your video and it only took me 10min. total.Just the sound i was looking for,no need for the vance and hines:) Thanx for the video

Thanks for this very good DIY. I did this mod and it worked fantastic. It was way to quiet before, but has now got a very nice sound now. The sound is still on the low side, but that might just be what you want.

Just did my 2008 Nomad yesterday - has about 28K miles on it - one side took a little convincing to come out after drilling, maybe 5 minutes of work - the other side came right out. Sounds good.

Way better sounding. Low tone growl, and not annoying . Look easy enough. Thanks

thanks for the video dude. Easy enough to do myself. Saves me money.

Nicely done video and the results are very good, I don't like loud cracking exhausts and this sounds nice. Well done!

Just finished this on my VN 1500 Classic Tourer (2000 Model year). Point to note, the baffles have a slightly larger measurement on the inside so if you follow this its a good idea to have a dremmel with a grinder/cutter handy.

Thanks for sharing great video

Good stuff- sounds great & it's about $500 less than V&H. Thanks

Sounds way better brother

You told Jason Menard "NO" on re jetting the carbs!!!! And I will take you at your word. Now what about the "Catalytic Converter"on my 2007 Vulcan Nomad 1600. Did you drill it out? And if so what about the back pressure that I keep hearing is needed for the bike to operate at it's best? What work will I need to do on the fuel and air mixture (Crabs) if I De-baffle the pipes and drill out or gut the Catalytic Converter (Goat)? I hate to ruin an expensive piece of equipment, then find out I needed it. Need some good advice.. Thank you...

Good deal will have to do this to my 2008 can't see spending $500.+ for new exhaust when the ones on there looks good!!! Thnx

Just put vance and hines pipes,,install,,10 times louder now on mine,,ty for the vid.

I loved your Video and want to do the same to my 2007 Kawasaki Vulcan Nomad 1600. My question is, What about the Catalytic converter (Goat) did you drill the ends out? Did you do anything with it at all? Also did you have to install different needle valves and re-tune your carbs on the bike?

Great mod, I'm tempered to do this but would like to know how did it effect performance with less back pressure, was there any popping and back firing on deceleration and did you do any other mods, i.e.: air intake and power commander ??

do all exhausts have their baffles welded? I asked a mechanic in Suzuki about a bike with a good sound if its baffles were removed and he was hand-checking the body of the exhasut. strange right?

So, it's been a couple of years since you posted this. How about an update? Did you leave them as is or upgrade to some after market pipes? Any performance change? I have an 04 and plan to do this next weekend as I'd like to avoid paying ~500 for a set of Cobra pipes. Thanks for the video btw!

I have a 91 Vulcan 1500. Will the same method have the same results, meaning the baffles just pull out as easy as yours did??

The sound is MUCH improved! Since most mc motors need SOME back-pressure to perform their best, have you considered installing some performance aftermarket baffles? I understant the Big City Thunder Monsters are pretty cool.

has anybody noticed a significant drop in fuel economy? i went from about 40mpg to 20mpg, any suggestions?

Did you have any problems with the Fuel Injection light?

This does not solve the problem entirely. I have 1600 nomad that has a muffler under the bike. This has to come out too.

Well mine didn't work like that I still haven't got the baffles out

Too many unanswered questions here. Could you please help other fellow rides and tell us if you get deceleration pops, back firing, etc etc, loss of low end torque. Please post what did you do

I have just done this on my 1998 Vulcan Nomad exactly how you have shown and I cannot budge the baffle. Wobbles around in the muffler but cant seem to budge it. Any suggestions ?

Will a 1600 nomad exhaust fit on a 1500a

please answer will i need to jet my carbs if i do this to my pipes

would this work for a Kawasaki Vulcan Vaquero 1700 2016

lols he said oot. canada amuses me

"dresser leg"

That was a waste of time

please answer will i need to jet my carbs if i do this to my pipes